• 제목/요약/키워드: Located

검색결과 21,737건 처리시간 0.047초

연속 반응 시간 과제 수행의 행위 관찰과 운동 상상이 거울신경활성에 미치는 영향 (The effects of action observation and motor imagery of serial reaction time task(SRTT) in mirror neuron activation)

  • 이상열;이명희;배성수;이강성;공원태
    • 대한물리의학회지
    • /
    • 제5권3호
    • /
    • pp.395-404
    • /
    • 2010
  • Purpose : The object of this study was to examine the effect of motor learning on brain activation depending on the method of motor learning. Methods : The brain activation was measured in 9 men by fMRI. The subjects were divided into the following groups depending on the method of motor learning: actually practice (AP, n=3) group, action observation (AO, n=3) group and motor imagery (MI, n=3) group. In order to examine the effect of motor learning depending on the method of motor learning, the brain activation data were measured during learning. For the investigation of brain activation, fMRI was conducted. Results : The results of brain activation measured before and during learning were as follows; (1) During learning, the AP group showed the activation in the following areas: primary motor area located in precentral gyrus, somatosensory area located in postcentral gyrus, supplemental motor area and prefrontal association area located in precentral gyrus, middle frontal gyrus and superior frontal gyrus, speech area located in superior temporal gyrus and middle temporal gyrus, Broca's area located in inferior parietal lobe and somatosensory association area of precuneus; (2) During learning, the AD groups showed the activation in the following areas: primary motor area located in precentral gyrus, prefrontal association area located in middle frontal gyrus and superior frontal gyrus, speech area and supplemental motor area located in superior temporal gyrus and middle temporal gyrus, Broca's area located in inferior parietal lobe, somatosensory area and primary motor area located in precentral gyrus of right cerebrum and left cerebrum, and somatosensory association area located in precuneus; and (3) During learning, the MI group showed activation in the following areas: speech area located in superior temporal gyrus, supplemental area, and somatosensory association area located in precuneus. Conclusion : Given the results above, in this study, the action observation was suggested as an alternative to motor learning through actual practice in serial reaction time task of motor learning. It showed the similar results to the actual practice in brain activation which were obtained using activation of mirror neuron. This result suggests that the brain activation occurred by the activation of mirror neuron, which was observed during action observation. The mirror neurons are located in primary motor area, somatosensory area, premotor area, supplemental motor area and somatosensory association area. In sum, when we plan a training program through physiotherapy to increase the effect during reeducation of movement, the action observation as well as best resting is necessary in increasing the effect of motor learning with the patients who cannot be engaged in actual practice.

성대결절의 위치와 발성 방법과의 관계 (The Relationship between The Voicing Method and Vocal Fold Nodule located in Different levels)

  • 안철민;문고정;정덕희
    • 대한후두음성언어의학회지
    • /
    • 제13권1호
    • /
    • pp.33-39
    • /
    • 2002
  • Background and Objectives : The vocal fold nodules which were made by excessive contact or vibration of the vocal folds were classified to the soft nodule and the hard nodule in according to the hardness or the duration of nodule. Sometimes laryngologist saw the nodule to be located in different level. Authors thought that each nodule to be located in different level might have the different causes. Therefore we studied to know the relationship between the voicing technique and each vocal fold nodule to be located in different level. Materials and Methods : One-hundred forty nine patients who had the vocal fold nodule were evaluated. Sites and shapes of the vocal fold nodules were investigated using videostroboscopy. Videokymography was also used to scan the center of the vocal fold nodules during phonation and classified to several types. Same procedures were done on normal subject while he simulated the various types of voicing. And we compared the findings between both of them. Three different types of lesion can be distinguished. These are ML group that lesions were located from mid to low, MH group that lesions were located from mid to upper and HL group that lesions were located from lower to upper of the vocal folds. Results : The VKG findings of ML group and situation simulating with hard glottal attack and vocal fry were similar. MH group had a similar VKG findings with situation simulating with whispering or high pitch voicing. HL group had a similar VKG findings with situation simulating with loud voicing. Conclusions : Authors thought that each vocal fold nodule, which had different shapes and located in different level, related with the different types of voicing.

  • PDF

IPA (Importance-Performance Analysis)를 활용한 유무형 외식 상품 속성 연구 - 만두전문점을 중심으로 - (Analysis of Tangible and Intangible Attributes in Foodservice products by IPA - Focus on Dumpling shops -)

  • 오지은;조미숙
    • 한국식생활문화학회지
    • /
    • 제31권2호
    • /
    • pp.149-160
    • /
    • 2016
  • This study utilized importance and performance analysis (IPA) in order to improve and plan tangible (menu) and intangible (service) products at dumpling shops. Menu attributes for tangible products were classified into sensory factor, health factor, hygiene factor, and external factor. Attributes for intangible products were classified into response factor, visual factor, spatial factor, package factor, and promotion factor. In IPA analysis of tangible products, sensory factor and hygiene factor were located in Quadrant I (Keep up the good work). Health factor was located in Quadrant III (Low priority for management) and the external factor was located in Quadrant II (Possible overkill). In IPA analysis of intangible products, response factor and visual factor were located in Quadrant I, whereas promotion factor was located in Quadrant III. The attributes related to kindness of staff and space for customers in the store were more important, but due to their low performance level, they were located in Quadrant IV (Concentrate management here). Thus, the product planner should improve attributes of the related product immediately. As a result, the development of competitive products within the market is possible.

교신(KI8)혈 혈위에 관한 연구 (Study on the Acupoint Location of Kyoshin (KI8))

  • 박상균
    • Korean Journal of Acupuncture
    • /
    • 제37권4호
    • /
    • pp.245-252
    • /
    • 2020
  • Objectives : The objective of this study was to examine the acupoint location of Kyoshin (KI8) from classic literatures. Methods : A review of KI8 location along the meridian route from 18 classics of acupuncture and moxibustion - 『Huangdineijing·Lingshu』, 『Huangdimingtangjingjixiao』, 『Zhenjiujiayijing』, 『Huangdineijingtaisu』, 『Huangdimingtangjiujing』, 『Beijiqianjinyaofang』, 『Waitaimiyaofang』, 『Ishimpo』, 『Taipingshenghuifang』, 『Tongrenshuxuezhenjiutujing』, 『Shengjizonglu』, 『Zhenjiuzishengjing』, 『Shisijingfahui』, 『Shenyingjing』, 『Zhenjiujuying』, 『Yixuerumen』, 『Zhenjiudacheng』, and 『Yizongjinjian』 - was performed. Then, KI7 location on classics and current standard KI8 location were compared. Results : Based on modern standard acupoint location system, the acupoint of KI8 is located on the medial aspect of the leg, in the depression posterior to the medial border of the tibia and it is on the route of spleen meridian. But no classics of acupuncture and moxibustion said KI8 was located on the route of spleen meridian. In addition, KI8 location on classics was largely described as being located in front of KI7, but only in 『Yizongjinjian』 was it written that KI8 was located posterior to KI7. Conclusions : Through a classic literature review, it is possible to explain that KI8 is located posterior to spleen meridian. The acupoint of KI8 seems to be located between medial border of flexor pollicis longus and flexor digitorum longus based on anatomical location.

불법무기 자진신고의 대상별 유사성 (Similarity on Types of Illegal Weapon Self-report)

  • 주일엽;조광래
    • 시큐리티연구
    • /
    • 제53호
    • /
    • pp.137-157
    • /
    • 2017
  • 본 연구는 전국 16개 지역별로 총기류, 도검류, 포탄류, 실탄류, 폭발물류 등 불법무기 자진신고 현황을 연구대상으로 2011년 불법무기 자진신고의 유형별 유사성, 2015년 불법무기 자진신고의 유형별 유사성을 파악하고 변화를 규명하는데 목적이 있다. 구체적인 연구결과는 다음과 같다. 첫째, 2011년 불법무기 자진신고의 유형별 군집은 '군집 1'은 총기류, 도검류, 포탄류, 폭발물류 등 4종의 불법무기가 포함되며, '군집 2'는 실탄류 1종의 불법무기가 포함된다. 둘째, 2011년 불법무기 자진신고의 유형별 다차원척도는 총기류는 우측 하단(4/4분면), 도검류는 우측 하단(4/4분면), 포탄류는 우측 하단(4/4분면), 실탄류는 좌측 중앙부(3/4분면), 폭발물류는 우측 상단(1/4분면) 등으로 나타났다. 셋째, 2015년 불법무기 자진신고의 유형별 군집은 '군집 1'은 총기류, 도검류, 포탄류, 폭발물류 등 4종의 불법무기가 포함되며, '군집 2'는 실탄류 1종의 불법무기가 포함된다. 넷째, 2015년 불법무기 자진신고의 유형별 다차원척도는 총기류는 우측 하단(4/4분면), 도검류는 우측 상단(1/4분면), 포탄류는 우측 상단(1/4분면), 실탄류는 좌측 중앙부(2/4분면), 폭발물류는 우측 중앙부(4/4분면) 등으로 나타났다. 본 연구는 불법무기 자진신고의 유형별 유사성을 규명함으로써 국가 안보와 국민 안전에 기여하는 기초를 제공하고, 후속연구를 위한 기초자료를 제시하였다는 점에서 상당한 의의를 가진다.

  • PDF

T-Scan system을 이용한 측두하악 장애 환자의 교합 분석에 관한 연구 (OCCLUSAL ANALYSIS OF PATIENTS WITH TEMPOROMANDIBULAR DYSFUNCTION BY USE OF T-SCAN SYSTEM)

  • 박선주;정재헌
    • 대한치과보철학회지
    • /
    • 제29권3호
    • /
    • pp.121-140
    • /
    • 1991
  • Fifteen dental college students of Chosun University without the abnormal occlusion, the history and symptom of temporomandibular dysfunction(TMD), and who had all permanent teeth except third molar and the fifteen moderate group and the fifteen severe group classified according to Helkimo's dysfunction index among patients on the basis of the symptom of TMD were selected. The occlusal contact, occlusal force and occlusal interference in eccentric movement was studied and analyzed using T-Scan system. The result were as follows : 1. The TLR centering around midsagittal axis was located at $1.42{\pm}0.82mm$ in control group, $3.36{\pm}1.45mm$ in severe group, and as TMD was heavier, occlusal contact was located at the farther point from midsagittal axis. 2. The PLR from the first contact to the fifth contact centering around midsagittal axis was located at $1.73{\pm}1.78mm$ in control group, $3.36{\pm}1.41mm$ in moderate group, and $5.39{\pm}4.32mm$ in severe group, and as TMD was heavier, occlusal contact was located at the farther point from midsgittal axis. 3. The TFB, PFB, RFB and LFB of occlusal contact centering around incisal axis had no significant difference statistically among control group, moderate group, and severe group, and it was located at first molar. 4.The LF and RF was smaller in TMD group than in control group. 5. The LR moment of occlusal force centering around midsagittal axis was located at $178.51{\pm}139.81N.mm$ in control group, $466.25{\pm}296.47N.mm$ in moderate group, and $749.18{\pm}588.18N.mm$ in severe group. And as TMD was heavier, it was located at the farther point from midsagittal axis. 6. The RL and LL of occlusal force centering around incisal axis had not-significance statistically among control group, moderate group, and severe group, and it was at the first molar. 7. The number of occlusal interference of the eccentric movement was increased in the patients of TMD.

  • PDF

국외소재 한국문화재 활용을 위한 "디스플레이 전시와 온라인 박물관 운영 방안"에 대한 연구 (A Study of "Plans to Operate Exhibition Displays and Online Museums" to Utilize Korean Cultural Property Located Abroad)

  • 박성환;최희수
    • 한국콘텐츠학회논문지
    • /
    • 제16권12호
    • /
    • pp.636-643
    • /
    • 2016
  • 국내 문화재와 관련된 여러 재단은 해외 한국문화재 소장 기관의 협조를 얻어 국외소재 한국문화재를 조사하고 있고, 조사 결과는 보존 복원 및 전시, 교육 등의 활용기반이 되고 있다. 국외에서 한국문화재에 대한 연구조사 및 전시 등의 활용은 활성화 되어있는 반면 국내는 연구조사 결과를 통한 활용의 사례가 많지 않으며, 국외소재문화재에 대한 접근성 또한 낮다. 본 연구의 목적은 국외소재 한국문화재에 대해 국내에서의 활용할 수 있는 방안을 모색하는 것이며, 디스플레이 전시와 온라인 박물관은 국외소재 한국문화재를 활용할 수 있는 방안이 될 수 있을 것이다. 이를 통해 국외소재 한국문화재에 대한 접근성을 높이고 전시, 교육 등 다양한 분야로 활용할 수 있을 것이다.

Genome-wide association analysis of nine reproduction and morphological traits in three goat breeds from Southern China

  • Xiaoyan, Sun;Jing, Jiang;Gaofu, Wang;Peng, Zhou;Jie, Li;Cancan, Chen;Liangjia, Liu;Nianfu, Li;Yuanyou, Xia;Hangxing, Ren
    • Animal Bioscience
    • /
    • 제36권2호
    • /
    • pp.191-199
    • /
    • 2023
  • Objective: This study aimed to investigate the significant single nucleotide polymorphisms (SNPs) and genes associated with nine reproduction and morphological traits in three breed populations of Chinese goats. Methods: The genome-wide association of nine reproduction and morphological traits (litter size, nipple number, wattle, skin color, coat color, black dorsal line, beard, beard length, and hind leg hair) were analyzed in three Chinese native goat breeds (n = 336) using an Illumina Goat SNP50 Beadchip. Results: A total of 17 genome-wide or chromosome-wide significant SNPs associated with one reproduction trait (litter size) and six morphological traits (wattle, coat color, black dorsal line, beard, beard length, and hind leg hair) were identified in three Chinese native goat breeds, and the candidate genes were annotated. The significant SNPs and corresponding putative candidate genes for each trait are as follows: two SNPs located on chromosomes 6 (CSN3) and 24 (TCF4) for litter size trait; two SNPs located on chromosome 9 (KATNA1) and 1 (UBASH3A) for wattle trait; three SNPs located on chromosome 26 (SORCS3), 24 (DYM), and 20 (PDE4D) for coat color trait; two SNPs located on chromosome 18 (TCF25) and 15 (CLMP) for black dorsal line trait; four SNPs located on chromosome 8, 2 (PAX3), 5 (PIK3C2G), and 28 (PLA2G12B and OIT3) for beard trait; one SNP located on chromosome 18 (KCNG4) for beard length trait; three SNPs located on chromosome 17 (GLRB and GRIA2), 28 (PGBD5), and 4 for hind leg hair trait. In contrast, there were no SNPs identified for nipple number and skin color. Conclusion: The significant SNPs or genes identified in this study provided novel insights into the genetic mechanism underlying important reproduction and morphological traits of three local goat breeds in Southern China as well as further potential applications for breeding goats.

목표종 생태통로의 위치선정 -포유류 Road-kill 현장조사를 중심으로- (Eco-corridor Positioning for Target Species - By Field Surveying of Mammals' Road-Kill -)

  • 이용욱;이명우
    • 한국환경복원기술학회지
    • /
    • 제9권3호
    • /
    • pp.51-58
    • /
    • 2006
  • The purpose of this research presents a method to position and makes the structure for eco-corridors reasonably with collectable analysing results of various effects shown in mammals' road-kill at 429 points. Target animals of this research are Leopard cat, Siberian weasel, Raccoon dog, Korean hare, Eurasian red squirrel, Siberian chipmunk and Water deer. The results derived from the empirical analysis on the contents above are followed. First, according to the results as for Leopard cat road kill analysis, which is designated as Endangered Species Class II, the eco-corridor might be located at near village having stead food in order to decrease the frequencies of road-kill, because its road kill points were mainly collected at 4 lane hilly road with mountain-road-farm area geological type of. Second, because Siberian weasel's road kill was detected at 2 lane hilly road with mountain-road-stream geological type, the eco-corridor might be located at near a mill to decrease road-kill frequencies. Third, the road-kill frequency of Eurasian red squirrel can be reduced when the eco-corridor is located at the area across coniferous tree near 4 lane west sea freeway with mountain-road-mountain. Fourth, the road-kill of Raccoon dog can be reduced when the eco-corridor is located at 4 lane mountain road or hilly road with the geological type having farm land-road-mountain(stream). Fifth, Korean hare's road-kill can be reduced when the eco-corridor is located at grass land across ridge line of mountain, because wild rabbit road kill was happened at 4 lane mountain road or 2 lane mountain road(mountain-road-mountain). Sixth, As for Siberian chipmunk, the eco-corridor might be located at the side slope of mountain road at 2 lane mountain road under the speed of 60km/h with mountain-road-mountain. Seventh, For Water deer, the eco-corridor might be located at 4 lane hilly road with mountain-road-farm land. As for Common otter, Amur hedgehog, Yellow-throated marten, Weasel, it is difficult to specify the proper site of eco-corridor due to the lack of data. Eco-corridors for carnivores might be well located at 4 lane hilly road or 2 lane hilly road with mountain-road-farm land, and the track for herbivores might be well located as a overhead bridge on mountain-road-mountain type across mountains. In order to position eco-corridors for wildlife properly, we have to research animal's behavior with ecological background, and to consider the local uniqueness and regularly collect the empirical road-kill data in long term 3 to 5 year, which can be the foundation for the more suitable place of wild life eco-corridors.

QFD 및 Stage-gate 모델을 활용한 국방분야 개발단계 품질관리 방안 연구 (A Study on the development quality control by application of QFD and Stage-gate in defense system)

  • 장봉기
    • 품질경영학회지
    • /
    • 제42권3호
    • /
    • pp.279-290
    • /
    • 2014
  • Purpose: The purpose of this study is to propose adoption of QFD and Stage-gate in order to analyze the quality of korea defense system. Methods: Drawing change data of initial production phase in korea defense system were anlayzed and a practical method was proposed. Results: The results of this study are as follows; Off line Quality Control should be introduced in development phase. Specially, in case of defense system, the best method is QFD(Quality Function Deployment) and Stage-gate process. At first, QFD 1 step defines product planning from VOC(Voice Of Customer), QFD 2 step specifies part planning from product planning, QFD 3 step defines process planning from part planning, QFD 4 step defines production planning from previous process planning. Secondly, Stage-gate process is adopted. This study is proposed 5 stage-gate in case of korea defense development. Gate 1 is located after SFR(System Function Review), Gate 2 is located after PDR(Preliminary Design Review), Gate 3 is located after CDR(Critical Design Review), Gate 4 is located after TRR(Test Readiness Review) and Gate 5 is located before specification documentation submission. Conclusion: Off line QC(Quality Control) in development phase is necessary prior to on line QC(Quality Control) in p roduction phase. For the purpose of off line quality control, QFD(Quality Function Deployment) and Stage-gate process can be adopted.