• 한국산림과학회지
• /
• 제99권5호
• /
• pp.686-692
• /
• 2010

This study described the general pattern of genetic variation among ten teak (Tectona grandis Linn. f.) provenances in Myanmar and determined the most suitable seed sources for the plantation program in Bago Yoma region. Seeds of ten provenances were collected to cover the whole teak natural distribution in Myanmar and planted at four trial sites in Bago Yoma region in 1998. Seven years after planting, variation was assessed for growth, morphological characteristics and their correlation with geoclimatic factors. Statistical analysis using ANOVA revealed that there were significant differences in most of the traits measured among provenances, trial sites and provenance ${\times}$ site interaction at five percent level. A positive significant correlation (p<0.01) was found among most of the traits. The regression analyses between all traits and geoclimatic factors indicated the existence of ecoclinal variation in teak. Most of the traits were negatively correlated with the latitude while a positive significant correlation was found between longitude and C/B ratio, crown-diameter, average branch angle and leaf-remain. There was no significant correlation between the mean temperature and any other traits in this study. Furthermore, growth traits and crown diameter were positively correlated with the mean annual rainfall while negative correlation was found between the geographical distance and growth traits. Results indicate that the latitudinal pattern of teak genetic variations in growth performance was attributed to the limit of mean annual rainfall. Comparative assessment showed that local provenances were generally the best and could be use as suitable seed sources for the plantation program in the Bago Yoma region.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.32-32
• /
• 2009

Silicon carbide (SiC) is a wide-bandgap semiconductor that has materials properties necessary for the high-power, high-frequency, high-temperature, and radiation-hard condition applications, where silicon devices cannot perform. SiC is also the only compound semiconductor material. on which a silicon oxide layer can be thermally grown, and therefore may fabrication processes used in Si-based technology can be adapted to SiC. So far, atomic force microscopy (AFM) has been extensively used to study the surface charges, dielectric constants and electrical potential distribution as well as topography in silicon-based device structures, whereas it has rarely been applied to SiC-based structures. In this work, we investigated that the local oxide growth on SiC under various conditions and demonstrated that an increased (up to ~100 nN) tip loading force (LF) on highly-doped SiC can lead a direct oxide growth (up to few tens of nm) on 4H-SiC. In addition, the surface potential and topography distributions of nano-scale patterned structures on SiC were measured at a nanometer-scale resolution using a scanning kelvin probe force microscopy (SKPM) with a non-contact mode AFM. The measured results were calibrated using a Pt-coated tip. It is assumed that the atomically resolved surface potential difference does not originate from the intrinsic work function of the materials but reflects the local electron density on the surface. It was found that the work function of the nano-scale patterned on SiC was higher than that of original SiC surface. The results confirm the concept of the work function and the barrier heights of oxide structures/SiC structures.

• 한국환경보건학회지
• /
• 제30권5호
• /
• pp.417-426
• /
• 2004

We investigate changing characteristics and concentration distribution of ambient air quality using data from which obtained local ambient air monitoring network and local meterological measuring sites in Gwangju area from January to December in 2003. Sulfur dioxide ($SO_2$) showed that increase from 8 AM and decrease in 6 PM but, it was not drastically changed concentration. it also 0.010 ppm in 1995 from at this time it's decrease step by step and than some constant in year 2001 to 2003. Nitrogen dioxide ($NO_2$) concentration was showed highest peak in 10 AM and increase again at 6 PM. And also it showed peak concentration (0.026 ppm) in 2001 and decreased from after that times. Ozone was showed peak concentration in 1 PM and Nitrogen dioxide was ditto in 10 AM from this data, we can conclude that this two article ws showed chemical reaction by 3 to 5 hours. There was no case of Ozone alarm in Gwangju area since 1995, but it showed highest ozone concentration (over 0.070 ppm) in May and June of the year and 2 to 4 PM of the day and sometimes it showed increase at the dawn. Ozone product optimum condition was that air temperature is over $25^{\circ}C$, no rain and increase solar radiation (over $20MJ/m^2$) and no wind or below 2.0 m/s wind speed.

• Journal of Welding and Joining
• /
• 제26권4호
• /
• pp.79-84
• /
• 2008

Use of sheet metal structure is increased in various fields such as automobile, aerospace and communication equipment industry. When this structure is welded, welding distortion is generated due to the non-uniformity of temperature distribution. Recently welding distortion becomes a matter of great importance in the structure manufacture industry because it deteriorates the product's quality by bringing about shape error. Accordingly many studies for solving the problems by controlling the welding distortion are being performed. However, it is difficult to remove all kinds of distortion by welding process, though various kinds of methods for reducing distortion are applied to production. Consequently, straightening process is operated if the high precision quality is requested after welding. The local heating method induces compression plastic deformation by thermal expansion in the heating stage and then leaves constriction of length direction in the cooling stage. Accordingly, in the case of sheet metal structure, straightening effect is expected by heating for the part of distortion. This study includes numerical analysis of straightening effect by the local heating method in distortion comes from production of welded sheet metal structure. Particularly straightening effect followed by dimensions of heating area is analyzed according to the numerical analysis. The numerical analysis is performed by constructing 3-dimensional finite element model for 0.4mm stainless steel-sheet metal. Results of this study confirm that straightening effect changes as heating area increases and the optimum value of heating area that proves the maximum straightening effect exists.

• Journal of Forest and Environmental Science
• /
• 제38권2호
• /
• pp.110-121
• /
• 2022

Leaf functional traits widely have been used to understand the environmental controls of resource utilization strategy of plants along the environmental gradients. By using key leaf functional traits, we quantified the relationships between leaf traits and local climate throughout the distributional range of Rhododendron caucasicum Pall. in eastern and western Georgian mountains (the South Caucasus). Our results revealed, that all traits showed high levels of intraspecific variability across study locations and confirmed a strong phenotypic differentiation of leaf functional variation along the east-west longitudinal gradient in response to the local climate; out of the explored climatic variables, the moisture factors related to precipitation and number of precipitation and dry days for winter and growth seasons were more strongly related to leaf trait variation than the elevation and air temperature. Among studied leaf traits, the leaf specific area (SLA) showed the highest level of variability indicating the different resource utilization strategies of eastern and western-central Rh. caucasicum individuals. High SLA leaves for western-central Caucasian individuals work in relatively resource-rich environments (more humid in terms of precipitation amount and the number of precipitation days in winter) and could be explained by preferential allocation to photosynthesis and growth, while eastern Caucasian samples work in resource-poor environments (less humid in terms of precipitation amount and the number of precipitation days in winter) and the retention of captured resources is a higher priority appearing in a low SLA leaves. However, more evidence from a broader study of the species throughout its distribution range by including additional environmental factors and molecular markers are needed for firmer conclusions of intraspecific variability of Rh. caucasicum.

• Ocean and Polar Research
• /
• 제45권3호
• /
• pp.173-183
• /
• 2023

The barren ground phenomenon in Korea began to occur and spread in the southern coast region and in Jeju Island in the 1980s, and since the 1990s, the damage has become serious in the east coast region as well. Korea has enacted the fisheries resource management act to manage such barren ground through the installation of sea forests among projects for the creation of fishery resources. Until now, projects related to the identification of the cause of barren ground have focused on the density of crustose coralline algae, sea urchins and seaweed, so the original cause of barren ground has not yet been identified. In order to manage barren ground, it is necessary to identify the cause of barren ground. To identify these causes, it is necessary to comprehensively consider i) studies on spatial characteristics such as rock mass distribution, slope and water depth, ii) studies on ecological and oceanographic characteristics such as water temperature, salinity, El Niño, and typhoons etc, iii) studies on organisms such as crustose coralline algae, macroalgae, and sea urchins, and iv) studies on coastal use such as living and industrial sewage inflow. Next, as with regard to legislative policy proposals , it is necessary to prepare self-management measures by the government, local governments, and fishermen as well as address management problems related to the use of sea forests by fishermen after their creation . In addition, when creating a sea forest, a management model for each resource management plan is required, and evaluation indicators and indexes that can diagnose the cause of barren ground and guidelines for barren ground measures should be developed.

• 헤리티지:역사와 과학
• /
• 제37권
• /
• pp.327-348
• /
• 2004

본 연구에서는 한반도 이남의 지역적 기후 특성을 분석하고, 서식하고 있는 흰개미 (Reticulitermes speratus kyushuensis Morimoto)의 생태적 특성 및 선호도(온도, 습도, 수종)를 실험실에서 확인하였다. 한반도 이남, 특히 남부지역은 흰개미(R. speratus kyushuensis Morimoto)의 서식 및 활동에 최적인 기후지역으로 확인되었다. 부산이 Coptotermes formosanus Shiraki의 야외 분포 북방한계 ($4^{\circ}C$)에 근접되어 있고, 춘천이 Reticulitermes speratus Kolbe의 야외분포 북방한계 ($-4^{\circ}C$)가 한반도를 통과하는 지역으로 확인되었다. 흰개미는 $30^{\circ}C$ (90% RH이상)에서 최대 먹이 섭취율을 보였다. $10^{\circ}C$에서 $30^{\circ}C$(90% RH 이상)까지 약 95%이상의 생존율이 관찰되었지만, $32^{\circ}C$이상에서 사망률이 높아졌다. 또한 52% RH($30^{\circ}C$)와 70% RH($30^{\circ}C$)에서 높은 사망률(100%)이 관찰되었지만 84% RH에서 높은 생존율(97%)을 보였다. 침엽수인 소나무를 먹이로 선호하고 높은 생존율(87%)을 보였지 만 활엽수인 오동나무에서는 낮은 생존율(14%)이 확인되었다. 서울 종묘의 자연수림에서 흰개미의 침입율은 약 34.5%(55개 지점 중 19개 지점, 3년간) 이었다. 침입율은 매년 증가하였지만 발견율은 낮아지고 실종률은 높아지는 경향이 확인되었다. 흰개미 군체 일부는 발견된 목재를 계속 섭취하고, 다른 일부는 새로운 목재를 탐색하는 먹이 찾기 습성을 실험적으로 확인하였다. 종묘의 지표부근에서 흰개미를 관찰할 수 있는 기간은 2001년 4월부터 11월까지이고 최대 활동기는 7월 및 8월인 것으로 야외실험을 통하여 확인하였다. 그리고 동절기(2000년 11월~2001년 3월)에도 지중에서 활동하는 것이 확인되었다. 이상의 결과, 한국 목조문화재를 가해하는 흰개미의 생태적 특성 및 가해 정도에 관한 생물학적 기초 자료를 최초로 제시하였다. 특히 한반도 이남의 기후조건에 따른 흰개미의 활동시기 및 이에 따른 지역적 손상분포를 확인하고 이를 방제할 수 있는 목재 보존제의 성분 특성 및 효과가 확인됨에 따라 향후 생물학적 손상, 특히 흰개미로부터 한국 목조문화재를 예방적으로 보존 관리하기 위한 종합적 방안수립(Integrated Pest Management, IPM)이 가능할 것으로 기대된다. 또한 이러한 연구결과는 흰개미로 발생되는 경제적 손실을 줄일 수 있는 방제학적 기초 자료로 활용될 것으로 기대된다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권4호
• /
• pp.1-5
• /
• 2019

We investigated the effect of Fe₃O₄ addition on the critical temperature of (Bi, Pb)-2223 polycrystalline samples. Bi_1.6Pb_0.4Sr₂Ca₂Cu₃O_10+δ + x wt. % Fe₃O₄ (x = 0.0, 0.2, 0.4, 0.6, and 0.8) samples were prepared by using a solid-state reaction method. The analysis of X-ray diffraction data indicates that as Fe₃O₄ is added, dominant phase of the sample changes from Bi-2223 to Bi-2212 with an increasing Bi-2201 phase. The transition temperature of the samples drastically decreased with the Fe₃O₄ addition. The resistance data of samples with x = 0.2 and 0.4 showed a double transition indicating a coexistence of Bi-2223 and Bi-2212 phase while the samples with x = 0.6 and 0.8 showed a single transition with a semiconducting behavior. This phase transition may originate from changes in local structure of the Bi-2223 system by Fe₃O₄ addition. Analysis of the pair distribution function of the Cu-O pair in the CuO₂ plane calculated from extended X-ray absorption fine structure data revealed that the oxygen coordination of copper ion changes from CuO₄ planar type (x = 0.0 - 0.4) to CuO₅ pyramidal type (x = 0.6, 0.8). The correlated Debye-Waller factor, providing information on the atomic disorder within the CuO₂ plane, shows an inverse relation to the coordination number. These results indicate that addition of Fe₃O₄ changes the oxygen distribution around Cu in the CuO₂ plane, causing a phase transition from Bi-2223 to more stable Bi-2212/Bi-2201 phases.

• Bulletin of the Korean Chemical Society
• /
• 제34권7호
• /
• pp.1995-2000
• /
• 2013

Layered $Li_{1.2}(Fe_{0.16}Mn_{0.32}Ni_{0.32})O_2$ was prepared by the mixed hydroxide method at various temperatures. Xray diffraction (XRD) pattern shows that this material has a ${\alpha}-NaFeO_2$ layered structure with $R{\bar{3}}m$ space group and that cation mixing is reduced with increasing synthesis temperature. Scanning electron microscopy (SEM) reveals that nano-sized $Li_{1.2}(Fe_{0.16}Mn_{0.32}Ni_{0.32})O_2$ powder has uniform particle size distribution. X-ray absorption near edge structure (XANES) analysis is used to study the local electronic structure changes around the Mn, Fe, and Ni atoms in this material. The sample prepared at $700^{\circ}C$ delivers the highest discharge capacity of 207 $mAhg^{-1}$ between 2-4.5 V at 0.1 $mAcm^{-2}$ with good capacity retention of 80% after 20 cycles.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제15권1호
• /
• pp.17-24
• /
• 2007

An experimental investigation was carried out for 4 different types of the aluminum foam heat sinks which were inserted into the annulus. The purpose of this study is to examine the feasibility of a heat sink with high performance forced convective water cooling in the annulus. The local wall temperature distribution, inlet and outlet pressures and temperatures, and heat transfer coefficients were measured for heat flux of 13.6, 18.9, 25.1, 31.4 $kW/m^2$ and Reynolds number ranged from 120 to 9,000. Experimental results show that the departure from the Darcy's law is evident from the pressure loss and the friction factor is much higher while the significant enhancement in Nusselt number is obtained, and average Nusselt number of aluminum foam with high pore density is much higher than that of aluminum foam with low pore density. Correlations for the friction factor is proposed and used for design of thermal applications.