• 대한기계학회논문집B
• /
• 제24권6호
• /
• pp.777-784
• /
• 2000

A Navier-Stokes code based on an unstructured finite volume method is used to simulate the MIT flapping foil experiment. A low Reynolds number ${\kappa}-{\varepsilon}$ turbulence model is used to close the Reynolds averaged Navier-Stokes equations. Computations are carried out for the whole experimental domain involving two flapping foils and a downstream hydrofoil. The computational domain is meshed with unstructured quadrilateral elements, partly structured. Numerical solutions show good agreement with experiment. The first harmonics of the velocity in the boundary layer shows local peak value inside the boundary layer and also local minimum near the edge of boundary layer. It is intensified as it develops along the blade surface. This is shown to be caused as the unsteadiness inside the boundary layer is being convected at a speed less than the free stream value. It is also shown that there is negligible mixing of the unsteadiness between the boundary layer and the free stream.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권3호
• /
• pp.210-214
• /
• 2013

The sensitivity of transonic flow past a Whitcomb airfoil to deflections of an aileron is studied at free-stream Mach numbers from 0.81 to 0.86 and vanishing or negative angles of attack. Solutions of the Reynolds-averaged Navier-Stokes equations are obtained with a finite-volume solver using the $k-{\omega}$ SST turbulence model. The numerical study demonstrates the existence of narrow bands of the Mach number and aileron deflection angles that admit abrupt changes of the lift coefficient at small perturbations. In addition, computations reveal free-stream conditions in which the lift coefficient is independent of aileron deflections of up to 5 degrees. The anomalous behavior of the lift is explained by interplay of local supersonic regions on the airfoil. Both stationary and impulse changes of the aileron position are considered.

• Archives of Reconstructive Microsurgery
• /
• 제16권2호
• /
• pp.63-67
• /
• 2007

This study was designed to introduce free toe tissue transfer using infiltration method of local anesthetic agent. Four toe pulp tissues were transferred to reconstruct finger tip defect in four patients who were not suitable for general anesthesia. Two flaps taken from the lateral side of the great toe was used for reconstruction of thumb defect and two flaps from the medial side of the second toe for resurfacing of the index and fifth finger. Flap sizes were various from $2.0{\times}2.0\;cm^2$ to $1.6{\times}4.0\;cm^2$. Anesthesia was induced by infiltration of 2% lidocaine hydrochloride (with 1:100,000 epinephrine) with dilution of normal saline in same volume unit, as like as in ordinary digital block. All vessels were anastomosed within 2 cm of distance from the proximal margin of the defect. Whole operative procedures were carried out by one team. All flaps were successfully taken without complication. The average operation time was 4 hours 10 minutes. The amount of anesthetic agent used in whole operative procedures was roughly 4 mL in the toe, 8 mL in the finger, and 12 mL totally. In conclusion, free toe tissue transfer using infiltration method of local anesthetic agent would be good strategy for finger tip reconstruction in the patient not suitable for general anesthesia.

• Structural Engineering and Mechanics
• /
• 제52권4호
• /
• pp.663-686
• /
• 2014

This paper deals with free vibration analysis of bidirectional functionally graded annular plates resting on a two-parameter elastic foundation. The formulations are based on the three-dimensional elasticity theory. This study presents a novel 2-D six-parameter power-law distribution for ceramic volume fraction of 2-D functionally graded materials that gives designers a powerful tool for flexible designing of structures under multi-functional requirements. Various material profiles along the thickness and in the in-plane directions are illustrated by using the 2-D power-law distribution. The effective material properties at a point are determined in terms of the local volume fractions and the material properties by the Mori-Tanaka scheme. The 2-D differential quadrature method as an efficient and accurate numerical tool is used to discretize the governing equations and to implement the boundary conditions. The fast rate of convergence of the method is shown and the results are compared against existing results in literature. Some new results for natural frequencies of the plates are prepared, which include the effects of elastic coefficients of foundation, boundary conditions, material and geometrical parameters. The interesting results indicate that a graded ceramic volume fraction in two directions has a higher capability to reduce the natural frequency than conventional 1-D functionally graded materials.

• Archives of Reconstructive Microsurgery
• /
• 제9권2호
• /
• pp.172-178
• /
• 2000

With esthetic concern in the reconstruction of skin and soft tissue defects of face, the use of local flap has been the method of choice. However, when there is extensive tissue loss in the face, local flaps do not provide satisfactory results. The amazing development of microsurgical technique has decreased the percentage of free flap failure, thus making free flap use in reconstruction of facial soft tissue defects. Many free flaps has been applied for reconstruction of face defects. Especially, the radial forearm flap has numerous advantages with which facial reconstruction is made possible. But, its disadvantages are ; the sacrifice of one major artery supplying the hand and donor site complications. In order to circumvent these disadvantages, we employed posterior interosseous artery(PIA) forearm free flap for the reconstruction of the face defects. The posterior interosseous forearm island flap was first described by Zancolli and Angrigiani(1985). Currently, the PIA island flap and free flap have been used for hand reconstructions. The disadvantages of the PIA flap are ; the small caliber of the pedicle, different locations of the perforating branches, and the proximity of the motor branch of the radial nerve. But, its advantages lies in preserving the major artery of the hand, minimal donor site morbidity, and fairly well matched skin texture and color, and that the flap volume is sufficient, not too bulky with convenient handling. By using this flap, we performed 1 case of tumor resection and 1 case of traumatic defect. From our experiences we conclude that it is one of many useful methods in the reconstruction of the skin and soft tissue defects of the face. We also have discussed advantages and some limitations of various free flaps for reconstruction of the face.

• 대한기계학회논문집A
• /
• 제32권2호
• /
• pp.148-161
• /
• 2008

A volume integral equation method (VIEM) is used to calculate the plane elastostatic field in an isotropic elastic half-plane containing multiple isotropic or anisotropic inclusions subject to remote loading. A detailed analysis of stress field at the interface between the matrix and the central inclusion in the first column of square packing is carried out for different values of the distance between the center of the central inclusion in the first column of square packing of inclusions and the traction-free surface boundary in an isotropic elastic half-plane containing multiple isotropic or anisotropic inclusions. The method is shown to be very accurate and effective for investigating the local stresses in an isotropic elastic half-plane containing multiple isotropic or anisotropic inclusions.

• Archives of Plastic Surgery
• /
• 제32권2호
• /
• pp.183-188
• /
• 2005

Defect on the temporal area caused by, surgical ablation of a tumor or an infection should be reconstructed immediately to prevent potentially life-threatening complications such as meningitis and cerebrospinal fluid leakage. The defect on the temporal area usually presents as a typical 'cone-shape'. Successful reconstruction requires sufficient volume of well-vascularized soft tissue to cover the exposed bone and dura. From 1994 through 2003, the authors applied rectus abdominis free flap for the reconstruction of the temporal defect from 1994 through 2003. There were 10 patients with a mean age of 52.1 years. Of these 10 patients, external auditory canal cancer was present in four patients, temporal bone cancer in two, parotid gland cancer in one and three patients were reconstructed after debridement of infection(destructive chronic otitis media). All the free flaps survived, and flap-related complications did not occur. Compared to a local flap, the rectus abdominis free flap can provide sufficient volume of well-vascularized tissue to cover the large defect and can be well-tolerated during an adjuvant radiation therapy. The long and flat muscle can be easily molded to fit in to the 'cone-shape' temporal defect without dead space. It is also preferred because of the low donor site morbidity, a large skin island and an excellent vascular pedicle. Two-team approach without position change is possible. In conclusion, the authors think that rectus abdominis free flap should be considered as one of the most useful method for the reconstruction of a cone-shaped temporal defect.

• Archives of Reconstructive Microsurgery
• /
• 제20권1호
• /
• pp.8-13
• /
• 2011

Purpose: A palatal defect following maxillectomy can cause multiple problems like the rhinolalia, leakage of foods into the nasal cavity, and hypernasality. Use of a prosthetic is the preferred method for obturating a palate defect, but for rehabilitating palatal function, prosthetics have many shortcomings. In a small defect, local flap is a useful method, however, the size of flap which can be elevated is limited. In 12 cases of palatomaxillary defect, we used various microvascular free flaps in reconstructing the palate and obtained good functional results. Method: Between 1990 and 2004, 12 patients underwent free flap operation after head and neck cancer ablation, and were reviewed retrospectively. Among the 12 free flaps, 6 were latissimus dorsi myocutaneous flaps, 3 rectus abdominis myocutaneous flaps, and 3 radial forearm flaps. Result: All microvascular flap surgery was successful. Mean follow up time was 8 months and after the follow up time all patients reported satisfactory speech and swallowing. Wound dehiscence was observed in 4 cases, ptosis was in 1 case and fistula was in 1 case, however, rhinolalia, leakage of food, or swallowing difficultly was not reported in the 12 cases. Conclusion: We used various microvascular flaps for palatomaxillary reconstruction. For 3-dimensional flap needs, we used the latissimus dorsi myocutaneous flap to obtain enough volume for filling the defect. Two-dimensional flaps were designed with latissimus dorsi myocutaneous flap, rectus abdominis flap and radial forearm flap. For cases with palatal defect only, we used the radial forearm flap. In palatomaxillary reconstruction, we can choose various free flap techniques according to the number of skin paddles and flap volume needed.

• Structural Engineering and Mechanics
• /
• 제55권1호
• /
• pp.79-92
• /
• 2015

In this study, free vibration analyses of symmetric laminated cantilever and simply supported damaged composite beams are investigated by using finite element method (FEM). Free vibration responses of damaged beams are examined using Euler Bernoulli beam and classical lamination theories. A computer code is developed by using MATLAB software to determine the natural frequencies of a damaged beam. The local damage zone is assumed to be on the surface lamina of the beam by broken fibers after impact. The damaged zone is modeled as a unidirectional discontinuous lamina with $0^{\circ}$ orientations in this study. Fiber volume fraction ($v_f$), fiber aspect ratio ($L_f/d_f$), damage length ($L_D$) and its location (${\lambda}/L$), fiber orientation and stacking sequence parameters effects on natural frequencies are investigated. These parameters are affected the natural frequency values significantly.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권4호
• /
• pp.1024-1040
• /
• 2014

The theoretical background and a numerical solution procedure for a time domain hydroelastic code are presented in this paper. The code combines a VOF-based free surface flow solver with a flexible body motion solver where the body linear elastic deformation is described by a modal superposition of dry mode shapes expressed in a local floating frame of reference. These mode shapes can be obtained from any finite element code. The floating frame undergoes a pseudo rigid-body motion which allows for a large rigid body translation and rotation and fully preserves the coupling with the local structural deformation. The formulation relies on the ability of the flow solver to provide the total fluid action on the body including e.g. the viscous forces, hydrostatic and hydrodynamic forces, slamming forces and the fluid damping. A numerical simulation of a flexible barge is provided and compared to experiments to show that the VOF-based flow solver has this ability and the code has the potential to predict the global hydroelastic responses accurately.