• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.4
• /
• pp.462-470
• /
• 2014

Objectives: The purpose of this study was to evaluate quartz concentrations in airborne respirable dust and particle size-related quartz concentrations. Methods: Respirable dust samples were collected using a 10 mm Dorr-Oliver nylon cyclone equipped with a 37 mm, $5{\mu}m$ pore size PVC filter. Dust samples were collected with a Marple's personal cascade impactor from stone grinding operations in five stone-related business located in the Gyeongsangbuk-do area. Results: The geometric mean of quartz concentration in the respirable dust was $0.170mg/m^3$, and the rate of exceeding the Korean Occupational Exposure Limit(KOEL) was 93.3%. The quartz concentration by particle size shows that it was the highest($0.115mg/m^3$) in stage 5($3.50-6.00{\mu}m$), which corresponds with the size of respirable particle. The smaller the particle sizes were, the higher quartz the content became. The mass fractions of inhalable, thoracic, and respirable dust were 72.1%, 36.0%, and 14.4%. Conclusions: The rate of the quartz concentration in respirable dust from stone grinding operations exceeding the American Conference of Governmental Industrial Hygienists Threshold Limit Values was 100%, which means proper work environmental management is required through regular working environmental measurements. Given that the stone grinding operations had a higher small size dust concentrations, there is a need to reduce respirable dust, such as through wet operation and local exhaust ventilation.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.2
• /
• pp.166-173
• /
• 2015

Objectives: The purpose of this study was to evaluate cobalt concentrations in airborne inhalable, total and respirable dust from manufacturing industries using cobalt. Methods: To compare cobalt concentrations, three types of dust samplers(a 37mm closed cassette sampler, Institute of Occupational Medicine(IOM) sampler, and Aluminum cyclone sampler) were used. The analysis of cobalt concentrations was conducted using AAs based on the NIOSH 7300 method. Results: The geometric mean of cobalt concentration in total dust was $1.47{\mu}g/m^3$, and the rate of excess of the Korean Occupational Exposure Limit(KOEL) was 10.0%. The geometric mean concentrations of cobalt in super alloy manufacturing industries were higher than those in plating industries, and molding operations showed higher exposure levels to cobalt than did other operations. Conclusions: The rate of cobalt concentration in inhalable dust from super alloy manufacturing industries exceeding the Workplace Exposure Limit(WEL) as recommended by the Health & Safety Executive(HSE) was 7.1%, which means proper work environmental management is required through wet work environments. Given that molding operations had higher cobalt concentrations, it is necessary to apply measures such as local exhaust for reducing airborne dust in cobalt manufacture industries.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.44.3-44.3
• /
• 2019

Massive stars, supernovae, and kilonovae are among the most luminous radiation sources in the universe. Observations usually show near- to mid-infrared (NIR-MIR, 1-5~micron) emission excess from H II regions around young massive star clusters (YMSCs) and anomalous dust extinction and polarization towards Type Ia supernova (SNe Ia). The popular explanation for such NIR-MIR excess and unusual dust properties is the predominance of small grains (size a<0.05micron) relative to large grains (a>0.1micron) in the local environment of these strong radiation sources. The question of why small grains are predominant in these environments remains a mystery. Here we report a new mechanism of dust destruction based on centrifugal stress within extremely fast rotating grains spun-up by radiative torques, namely the RAdiative Torque Disruption (RATD) mechanism, which can resolve this question. We find that RATD can destroy large grains located within a distance of ~ 1 pc from a massive star of luminosity L~ 10^4L_sun and a supernova. This increases the abundance of small grains relative to large grains and successfully reproduces the observed NIR-MIR excess and anomalous dust extinction/polarization. We show that small grains produced by RATD can also explain the steep far-UV rise in extinction curves toward starburst and high redshift galaxies, as well as the decrease of the escape fraction of Ly-alpha photons observed from HII regions surrounding YMSCs.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.1
• /
• pp.54.1-54.1
• /
• 2021

Observing sub-mm continuum emission from cold dust can play an important role in measuring star formation rates of galaxies, especially in the case of AGN host ones, since AGNs contaminate FIR fluxes by dust heating. To measure star formation rates, we observed total 49 local AGN host galaxies(z<0.2) by SCUBA-2 camera at James Clerk Maxwell Telescope(JCMT) at 450㎛ and 850㎛. We performed several tests with the observed images to determine whether each source is detected, and adopted 3s as the flux upper limit in non-detection cases. Using these measurements and FIR archival data, we modeled spectral energy distributions of the galaxies to estimate star formation rates. The effect of AGN activity on host galaxy star formation will be discussed.

• The Bulletin of The Korean Astronomical Society
• /
• v.29 no.2
• /
• pp.33.2-33.2
• /
• 2004

• Journal of the Korean Society of Safety
• /
• v.23 no.2
• /
• pp.1-6
• /
• 2008

The present study investigates on improvement of inhalation efficiency of hood in ventilation system for elimination of industrial dust. The hood, one of local exhaust ventilation system, has an important function to inhale a pollution source such as harmful dust and industrial waste. In this study, in order to improve the inhalation efficiency of the industrial hood, a new device named "gas-guide-device" was attached to inside of hood. The thermal fluid commercial code "Phoenics ver 3.1" was used to analyze the flow velocity distribution at the hood inlet and around the hood after gas-guide-device was installed. And the flow velocity on each position inside and around the hood was actually measured using the hot wire type anemometer under the same condition as that of numerical analysis. Also, in order to identify the optimum shape of gas-guide-device, numerical analysis and experiments are performed under various conditions and their results are presented. The results of this study revealed that the hood attached with gas-guide-device was higher the inhalation efficiency than that for without one and can be possible to improve the capture velocity of the industrial dust. And the optimum shape of gas-guide-device was identified that the ratio of two sizes of gas-guide-device, X to Y, has 4 to 6 on the basis of the hood size in use and the width (b) of gas-guide-device.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_3
• /
• pp.1461-1473
• /
• 2021

The purpose of this study is to ascertain how the level of resolution of land cover data affects on the local distribution and diffusion of fine dust. the CALPUFF model, which considers the spatio-temporal terrain conditions and changes in weather conditions, was used to estimate PM10 concentration in the Pyeongchon, Anyang-si, Gyeonggi-do. Three different resolutions of land cover data including 20 m, 50 m, and 100 m were compared as the input of the modeling. Using higher resolution land cover data (20 m), the wind speed of the simulated region was the largest and the PM10 concentration was the lowest. Through this study, we confirm that the resolution level of land-use/cover data can affect the local distribution and diffusion of fine dust, which can be detected by CALPUFF. Therefore, when using CALPUFF to simulate fine dust in the future, it can be suggested that checking the impact on spatial resolution according to the form of land cover in advance and proceeding with the simulation can achieve mote accurate results.

• Atmosphere
• /
• v.32 no.2
• /
• pp.119-133
• /
• 2022

From 2015 to 2021, high-concentration fine dust episodes with a daily average PM_2.5 concentration of 50 ㎍ m^-3 or higher were selected and classified into 3 types [long range transport (LRT), mixed (MIX) and Local emission and stagnant (LES)] using synoptic chart and backward trajectory analysis. And relationships between the fine particle data (PM_2.5 and PM₁₀ concentration and PM_2.5/PM₁₀ ratio) and meteorological data (PBLH, Ta, WS, U-wind, and Rainfall) were analyzed using hourly observation for the classification episodes on the Korean Peninsula and the Seoul metropolitan area (SMA). In LRT, relatively large particles such as dust are usually included, and in LES, fine particle is abundant. In the Korean peninsula, the rainfall was relatively increased centered on the middle and western coasts in MIX and LES. In the SMA, wind speed was rather strong in LRT and weak in LES. In LRT, rainfall was centered in Seoul, and in MIX and LES, rainfall appeared around Seoul. However, when the dust cases were excluded, the difference between the LRT and other types of air quality was decreased, but the meteorological variables (Ta, RH, Pa, PBLH, etc.) were further strengthened. In the case of the Korean Peninsula, it is difficult to find a clear relationship because regional influences (topographical elevation, cities and coasts, etc.) are complexly included in a rather wide area. In the SMA, it is analyzed that the effects of urbanization such as the urban heat island centered on Seoul coincide with the sea and land winds, resulting in a combination of high concentrations and meteorological phenomena.

• Journal of Service Research and Studies
• /
• v.10 no.1
• /
• pp.55-67
• /
• 2020

Fine dust has recently become one of the greatest concerns of Korean people and has been a target of considerable efforts by governments and local governments. In the academic world, many researches have been carried out in relation to fine dust, but the research on the economic field has been relatively few. So we wanted to know how fine dust affects the economy. Big data of PM10 concentration for fine dust and fine dust theme stock price were collected for five years from 2013 to 2017. Regression analysis was performed using the linear regression model, the generalized least squares method. As a result, the change in the fine dust concentration was found to have a effect on the related theme stocks' price. When the fine dust concentration increased compared to the previous day, the fine dust theme stocks' price also showed a tendency to increase. Also, according to the analysis of stock price change from 2013 to 2017 based on fine dust theme stocks, companies with large regression coefficients were changed every year. Among them, the regression coefficients of Monalisa were repeatedly high in 2014, 2015, 2017, Samil Pharmaceutical in 2015, 2016 and 2017, and Welcron in 2016 and 2017, and the companies were judged to be sensitive to the concentration of fine dust. The companies that responded the most in the past 5 years were Wokong, Welcron, Dongsung Pharmaceutical, Samil Pharmaceutical, and Monalisa. If PM2.5 measurement data are accumulated enough, it would be meaningful to compare and analyze PM2.5 concentration with independent variables. In this study, only the fine dust concentration is used as an independent variable. However, it is expected that a more clear and well-explained result can be found by adding appropriate additional variables to increase the explanatory power.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.8
• /
• pp.181-185
• /
• 2021

Road fine dust is not simply a problem of air pollution, but is threatening the health and life of the public, including pedestrians using sidewalks. There are various policy proposals related to road fine dust reduction, but the actual effect cannot be guaranteed. Therefore, in order to ensure the safe and pleasant passage of the people, the pavement pavement (sidewalk pavement) for fine dust management on the road should be designed by considering the location, use, function, etc., and appropriate paving materials and construction methods should be selected and designed or sidewalk facilities should be prepared. Therefore, this study examines the concept and legal basis of sidewalk pavement, reviews the status of sidewalk pavement-related technologies that purify air pollution, and utilizes sidewalk pavement materials under the revised sidewalk pavement guidelines for reducing fine dust, 「Act on Promotion of Purchasing of Green Products」 We intend to establish a legal basis for early application of sidewalk pavement technology by proposing measures and amendments to local government sidewalk pavement management rules.