• 열처리공학회지
• /
• 제23권6호
• /
• pp.301-308
• /
• 2010

A steel with chemical composition, 0.22% C, 0.25% Si, 1.26% Mn, 0.22% Cr, 0.04% Ti, 0.0042% B, and a microstructure of ferrite and spheroidized cementite has been press-formed to automotive center pillar followed by local-hardening heat-treatment. Hardness, tensile properties, fractography, microstructure and surface roughness of local-hardening heat-treated automotive center pillar have been examined. The directly heated and quenched area had fully martensitic structure with Vickers hardenss in the range of 500 to 510. The heat affected area close to the directly heated area showed dual-phase structure of ferrite and martensite. The width of the heat-treated and heat-affected areas after the local-hardening heat treatment was ranging from 32 mm to 50 mm. The surface of the local-hardening heat-treated center pillar revealed some temper color as a consequence of the oxidation during the heat treatment, but the surface roughness was not affected by the local-hardening heat treatment.

• 대한기계학회논문집
• /
• 제18권11호
• /
• pp.2902-2912
• /
• 1994

The ultrasonic array sensor system, consisting of one transmitter and fourreceivers instead of the traditional combination of a transmitter and a receiver is proposed in order to identify the location of objects. From the theoretical analysis and the experimental results, it is found that this new array sensor system could derive the information on the position of objects accurately, while the traditional sensor system could provide only the informatioin on the distance to objects. This sensor system is used to develop a sonar-based local mapping algorithm. The local map is used to find the existence of possible gates, through which the mobile robots can pass, and to select the suitable one in order for the robots to reach the goal safely in the presence of obstacles. The performance of the proposed local map algorithm is demonstrated experimentally in a small working area with several obstacles. It is found that the quality of the resulting local map is sufficient for the avoidance of collisions between the robots and obstacles and for the selection of the suitable gate leading to the goal. It is also shown that the global map of the working area could be obtained by integrating several local maps constructed from different locations and that it matches the actual layout of the working area well.

• 한국자동차공학회논문집
• /
• 제8권2호
• /
• pp.110-119
• /
• 2000

In this study, we considered the method evaluation the flexibility of joint area including member with circular section. We regarded the flexibility of joint area as translational and rotational springs for the purpose of expressing local deformation. We verified this method by the use of normal mode analysis. We also calculated this joint area occurring in penetration so as to apply this method to other cases. Compare with the shell element model. we can the considerably approximate values.

• 대한치과기공학회지
• /
• 제27권1호
• /
• pp.27-39
• /
• 2005

This study is to show the qualitative analytic methods of facial asymmetry with three-dimensional morphometry and find out asymmetry change resulted from enlarging three local regions. Steel balls (1.2mm in diameter) were attached in twenty seven landmarks of a symmetrical artificial human skull. This artificial human skull was used as experimental materials. Twelve different asymmetrical artificial human skulls were formed by gradually enlarging the mandibular body length, gonial angle, and ramus height of the left hemiface. From the three-dimensional morphometry of each skull type, nine local area measurements and three total sum area measurements(representing the mandibular area, maxillary area, and lower facial area) were acquired and made into the surface area asymmetry degree. Menton deviation itself was used as the surface area asymmetry degree while right-left percentages were used in the other measurements. These surface area asymmetry degrees were compared with each other to find out asymmetry change according to the degree of actual facial asymmetry. Through the statistical analysis, following results were obtained. The results were as follows: 1. Left maxillary area of artificial human skull was 7.13$\pm$0.26% larger while mandibular area was 4.14$\pm$0.12% smaller than each those of right hemiface. After all, left lower facial area was 1.44$\pm$0.07% larger than those of right hemiface.(n=7). 2. Among the reduce rates of surface area asymmetry degree resulted from enlarging three local regions, ramus height was similar to mandibular body length while it was bigger than those of gonial angle. 3. Among the increase rates of menton deviation resulted from enlarging the local regions, ramus height was the biggest, mandibular body length was the second and gonial angle was the smallest. These results suggest that three-dimensional morphometry can be used to qualitatively analyse facial asymmetry and the asymmetry degree is more influenced by enlarging the ramus height, mandibular body length than those of gonial angle.

• 한국농촌건축학회논문집
• /
• 제24권4호
• /
• pp.41-48
• /
• 2022

The purpose of this study is to present the implications of the rural living area setting and rural spatial structure analysis of the rural spatial strategy plan through case analysis. Following the decentralization of autonomy and the promotion of the transfer of state affairs to local areas, some of the general agricultural and fishing village development projects of the Ministry of Agriculture, Food and Rural Affairs were transferred to local areas. In addition, in 2020, the Ministry of Agriculture, Food and Rural Affairs introduced a rural agreement system for 113 cities and counties. However, since the understanding of the field is still low, this study attempted to present implications through a case analysis of the structure of rural space and the establishment of rural living areas in three local governments in Chungcheong. As a result of the study, in the stage of establishing the living zone, it is necessary to comprehensively review the contents reviewed in the analysis of the current status and conditions. However, the two local governments had insufficient interpretation of the axis by function and the establishment of the base area, or were using the upper plan as it was. Second, the source of the data used in the survey on the distribution status of living SOC facilities is unclear. Since the distribution status of living SOC facilities overlaps with accessibility analysis, OD data analysis, and resident survey results and is used as the basis for setting living areas, the data source should be clearly marked, and verification should be possible. Third, amenity (facility) resources were classified and analyzed according to the conditions and characteristics of local governments. The local government that applied the guidelines as they were was A local government, and the remaining local governments conducted surveys and analysis according to the current status. Forth, since the establishment of the rural living area is the minimum unit supported by government policies through future rural agreements, it is necessary to distinguish them based on quantitative standards in the process of establishing them. Only one case area presented clear grounds and standards, and the rest of the case areas presented standards but are based on non-quantitative standards. In order for rural agreements to be sustainable in the future and benefit local residents, it is necessary to use or establish a government-level institution that can collect and produce objective data. In addition, it is necessary to find ways to specify and standardize the standards for setting the living area and specify them in the guidelines.

• 농촌의학ㆍ지역보건
• /
• 제43권2호
• /
• pp.74-84
• /
• 2018

Objectives: The purpose of this study is to compare the perceptions of the rural healthcare service improvement project' performance and reorganization of public health centers between project staffs and local residents. Methods: Data collection from this study was performed in 141 project areas using structured questionnaires. Data analysis was used in SPSS 22.0 version. Results: The public health center staffs were more positive about the items for improving health facilities than the local residents. Residents in the Si area generally perceived performance as more positive than residents in the Gun area, while public health center staffs in the Gun area perceived performance as more positive than public health center staffs in the Si area. Local residents expressed negative opinions about the reduction in the number of branches of public health clinics and health medical clinics. Conclusions: In conclusion, careful improvement projects for rural health care and the establishment of health care systems will be necessary, reflecting the opinions of local residents, along with a variety of regional characteristics.

• 대한가정학회지
• /
• 제44권6호
• /
• pp.155-161
• /
• 2006

This study investigated housewives' perception of local special foods in Gwangju and Jeonnam in Gang Jin. Of 150 questionnaires sent, there were 114 responses. The most perceptible local special foods in Gwangju and Jeonnam area are as follows: Watermelon in Gwangju (100.0%), Pear in Naju (90.0%), Rice in Suncheon (40.0%), Gorosoe in Gwangyang (76.7%), Hongeo in Mopko (63.3%), Dolsan leaf mustard Kimchi in Yeosu (100.0%), Sweet Persimmon in Jangseong (86.7%), Salted bamboo sprout in Damyang (46.7%), Apple in Gokseong (90.0%), Butterfly rice in Hampyeong (63.3%), Gorosoe in Gurye (56.7%), Onion in Muan (96.7%), Peach in Hwasun(40.0%), Dallmaji rice in Yeongam (50.0%), Oyster mushroom in Jangheung (63.3%), Green tea in Boseong(96.7%), Heuksanhongeo in Sinan (53.3%), Loess sweet potato in Haenam (83.3%), Kukija in Jindo (60.0%), Laver in Wando (76.7%), Tohajeot in GangJin (73.3%), Citron in Goheung (90.0%), and Gulbi in Yeonggwang (100.0%). The most perceptible area and local special foods in Gwangju and Jeonnam area were in the following order: Green tea in Boseong (17.37%), Tohajeot in GangJin (15.97%), Watermelon in GwangJu (10.0%), Pear in NaJu (9.3%), and Loess sweet potato in Haenam (9.3%).

• 농촌지도와개발
• /
• 제23권1호
• /
• pp.101-114
• /
• 2016

Local food in rural area as a rural growth tool has to adapt to current market mechanisms by communication and promotion techniques. We need to know what and how local food consumers seek their benefits to market segmentations. The primary purpose of this study was to segment and profile the benefits of local food consumer so as to provide a better understanding of local food in Korea. A self-administered survey was obtained from 448 food consumer in the study area. Three distinct segments were identified based on the benefits; profit seeker (39.7%), passive consumers (19.0%), and value seeker (42.2%), and these were profiled with respect to socio-demographics and local food attitude-related features.

• 한국조리학회지
• /
• 제10권4호
• /
• pp.15-30
• /
• 2004

The aim of the present study was to investigate the effect of Dong-In dong Steamed rib on recognition degree of a citizen for popularization and publicity of a local food. A total of 201 adults, 99 women and 102 men aged over the 20 years, participated in this study. The subjects were all from Dae gu city. This analyses of data were conducted by SPSS for WINDOWS, Version 10.0. First, Dong-In dong steamed rib in Dea gu was thought of as a local food. Second, the steamed rib was recognized as a local food with an international reputation. Third, there were no significant differences in preference, local area, recognition, standard and relation between the rib and other local foods. Therefore, the present findings present the needs of public information, development, preservation and success for internationalization of a local food with the national financial and political support.

• 한국중재학회지:중재연구
• /
• 제20권2호
• /
• pp.199-225
• /
• 2010

This study investigates the characteristics of local arbitration committees in China based on arbitration institution evaluation model. Most of the literature on Chinese arbitration committees only focuses on CIETAC. However, the promulgation of 1994 Chinese arbitration act allows local arbitration committees to deal the arbitration cases related with foreign element. Before 1994, only CIETAC and CMAC handle the arbitration cases related with foreign element. For the evaluation of the local arbitration committees, this study establishes the arbitration institution evaluation model. This model has seven evaluation criteria: accessability, independence, neutrality, rapidity, economy, professionality, and extent of enforcement. Our findings are as follows. First, Chinese local arbitration committees have the strengths in the fields of accessability, economy and rapidity. However, they are deficient in the area of neutrality, professionality, and independence. Second, the spatial distribution of Chinese local arbitration committees is not equal in China. The number of local arbitration committees is big in the high growth region such as Shandong province. On the other hand, the number of local arbitration committees is small in the economically stagnant area. Third, the size and activity of local arbitration committees are various. Some of them are very active in dispute resolution through arbitration in China. For example, Beijing Arbitration Committee(BAC), Wuhan, Quangzou Arbitration Committee play the important role in dispute resolution through arbitration. However, the large part of local arbitration committees is financially weak and depend on the local government's financial support.