• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.1
• /
• pp.81-88
• /
• 2001

This study proposed an analytical method to evaluate a local allowable wall thickness (LAWT) for locally thinned pipe subjected to internal pressure and bending moment. In this method, the stresses in the thinned region were calculated by finite element analysis and plastic collapse was applied as a failure criterion of thinned pipe. Using this method, LAWT for a simplified thinned pipe was evaluated with variation in axial extent of thinned area, and it was compared with allowable wall thickness provided by previous pipe wall thickness criteria. The results showed that the LAWT was lower, about 50%, than that calculated by construction code or ASME Code N-597, and it was higher, about 2 times, than that estimated by evaluation model based on pipe experiments. In addition, LAWT was decreased with increasing axial extent of thinned area and saturated with further increase in axial extent. And, the variation in LAWT with axial extent of thinned area depended on type of load, especially a magnitude of bending moment, considering in the evaluation.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.116-119
• /
• 2005

As to the synthetical estimation of land covering parameters or the compounded land covering classification for multi-resolution satellite data, former researches mainly adopted linear or nonlinear regression models to describe the regression relationship of land covering parameters caused by the degradation of spatial resolution, in order to improve the retrieval accuracy of global land covering parameters based on 1;he lower resolution satellite data. However, these methods can't authentically represent the complementary characteristics of spatial resolutions among different satellite data at arithmetic level. To resolve the problem above, a new compounded land covering classification method at arithmetic level for multi-resolution satellite data is proposed in this .paper. Firstly, on the basis of unsupervised clustering analysis of the higher resolution satellite data, the likelihood distribution scatterplot of each cover type is obtained according to multiple-to-single spatial correspondence between the higher and lower resolution satellite data in some local test regions, then Parzen window approach is adopted to derive the real likelihood functions from the scatterplots, and finally the likelihood functions are extended from the local test regions to the full covering area of the lower resolution satellite data and the global covering area of the lower resolution satellite is classified under the maximum likelihood rule. Some experimental results indicate that this proposed compounded method can improve the classification accuracy of large-scale lower resolution satellite data with the support of some local-area higher resolution satellite data.

• Journal of Korean Public Health Nursing
• /
• v.5 no.2
• /
• pp.27-35
• /
• 1991

This study was conducted to provide information of effective student guidance in nursing education. The sample consisted of 103 nursing students in the area of Seoul and 143 students in Cholla Province. Data were collected by using a questionnaire, which consisted of items about personnal campus life and their major. The results are summarized as follows: 1. There was on significant difference in campus life adaptation on nursing students between Seoul and local areas. 2. In Seoul area, there was no significant difference in campus life adaptation according to academic years. In local area, significant difference was revealed in the academic years. The scores of campus life adaptation were possitively correlated with their academic years. 3. The variables which can be explained in the regional difference were social recognition of nursing and a family atmosphere. In conclusion, the results of the study indicate that, in Seoul and local areas, the personal and educational backgrounds of campus life adaptation were equalized. In addition, it is very important that the counselling on choice of major should be provided to high school students.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.12
• /
• pp.2166-2172
• /
• 2006

This paper presents a quality-of-service-enabled next generation local area network architecture which can provide efficiently convergence services over the Internet protocol. The basic concept of the architecture is to combine such three principle technologies as programmable switched network quality-of-service resource management and Internet protocol based network convergence. We discuss system entities and technologies development, which constitute the proposed network. The architecture of the network is then described. Implementation of systems verifies the proposed technologies. The network as a next generation local area network can provide quality-of-service-enabled real-time communication services as well as existing data traffic, and the open programmable interface can facilitates to adopt cost-effectively emerging new services or functionalities.

• 한국가시화정보학회:학술대회논문집
• /
• 2007.11a
• /
• pp.149-154
• /
• 2007

This study examines the effect of acoustic excitation using forced coaxial air on the flame characteristics of turbulent hydrogen nonpremixed flames. A resonance frequency was selected to acoustically excite the coaxial air jet due to its ability to effectively amplify the acoustic amplitude and reduce flame length and NOx emissions. Acoustic excitation causes the flame length to decrease by 15 % and consequently, a 25 % reduction in EINOx is achieved, compared to a flame without acoustic excitation. Moreover, acoustic excitation induces periodical fluctuation of the coaxial air velocity, thus resulting in slight fluctuation of the fuel velocity. From phase-lock PIV and OH PLIF measurement, the local flow properties at the flame surface were investigated under acoustic forcing. During flame-vortex interaction in the near field region, the entrainment velocity and the flame surface area increased locally near the vortex. This increase in flame surface area and entrainment velocity is believed to be a crucial factor in reducing flame length and NOx emission in coaxial jet flames with acoustic excitation. Local flame extinction occurred frequently when subjected to an excessive strain rate, indicating that intense mass transfer of fuel and air occurs radially inward at the flame surface.

• KCID journal
• /
• v.17 no.2
• /
• pp.82-94
• /
• 2010

Recently, biomass application for energy is getting more interests from many countries since biomass is widely available over the nation wide, whereas fossil fuels are produced in several limited regions. Recognizing the importance, government is promoting renewable energy use in Korea. The locational characteristics of the existing biomass potential directly can be used to decide scale of power plant for local agricultural facility. Although there are a few studies on feasible biomass potential in local areas, it is expected that both government and commercial sectors recognize the potential of biomass energy and the importance of reducing greenhouse gases. When planning biomass energy systems, biomass price is determined by the costs of collection, transportation, chipping, drying if required. In this paper investigates the economic and spatial characteristic of biomass location by land use map. However typical area of each categories in local region is not correct to agricultural census data. Therefore we concerned about how to calculate feasible biomass potential which it can be describing total amount of plant scale, and to match both of data. Even though its spatial distribution, in rural area in Korea, to expand biomass energy programs in the area, government serve to find areas of higher biomass production with suitable locations for plants to convert to bio-energy in order to increase the usage of renewable energy.

• ETRI Journal
• /
• v.19 no.4
• /
• pp.402-413
• /
• 1997

A CMOS device which has an extended heavily-doped amorphous silicon source/drain layer on the field oxide and an amorphous silicon local interconnection (ASLI) layer in the self-aligned source/drain region has been studied. The ASLI layer has some important roles of the local interconnections from the extended source/drain to the bulk source/drain and the path of the dopant diffusion sources to the bulk. The junction depth and the area of the source/drain can be controlled easily by the ASLI layer thickness. The device in this paper not only has very small area of source/drain junctions, but has very shallow junction depths than those of the conventional CMOS device. An operating speed, however, is enhanced significantly compared with the conventional ones, because the junction capacitance of the source/drain is reduced remarkably due to the very small area of source/drain junctions. For a 71-stage unloaded CMOS ring oscillator, 128 ps/gate has been obtained at power supply voltage of 3.3V. Utilizing this proposed structure, a buried channel PMOS device for the deep submicron regime, known to be difficult to implement, can be fabricated easily.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.1
• /
• pp.11-22
• /
• 2003

This landscape design proposal was presented to a design competition for the Incheon-city Southern Region Integrated Disposal Treatment Facility. The site is located in Dongchun-dong, Yeonsu-gu, Incheon. The main design concepts are as follows: First, considering connection of the site with surrounding water, inner sea is designed as an environmentally friendly place and as a leisure-sports theme park in which several sports facilities and relaxing places are arranged. It is also designed for everyone: people of all ages, disabled, workers, visitors and local residents. The design was processed on the basis of survey, analysis of surrounding competing facilities and SWOT analysis. Second, the ecological planting model was developed by analyzing the natural vegetation map in the surrounding area and planted vegetation types in the seaside reclamation area. The model was then applied to the ecological community, park area and roadside trees, so as to harmonize with the local habitat. Third, the project is intended to launch private capital for managing the sports park and golf course. This will enable a entrepreneur to make flexible plans for golf training field that is expected to yield a good financial return. It is expected that this design would serve the local residents as a symbolic, environmentally friendly leisure-sports theme park.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.10 no.3
• /
• pp.179-182
• /
• 1990

This experiment was carried out to determine the proper application time of nitrogen (N) and potassium ($K_2O$) as a additional fertilizer in corn cultivation at Taekwalyong alpine area.Two varieties of silage corn (cv. Suwon 19 and Kangwon local var.) were grown under different top dressing time (4-leaf, 7 leaf and 10-leaf stage) in 1989.Kangwon local variety produced more leaf area and higher dry matter yield than Suwon 19. However,there was no describle differences among application time of N and $K_2O$ fertilizer in both Suwon 19 and Kangwon local variety.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.4
• /
• pp.235-242
• /
• 2016

In general, ship hull form design is carried out in two stages. In the first stage, the longitudinal variation of the sectional area curves is adapted from a similar mother ship to determine the volume distribution in ships. At this design stage, the initial design conditions of displacement, longitudinal center of buoyancy, etc. are satisfied and the global hydrodynamic properties of the structure are optimized. The second stage includes the local designing of the sectional forms. Sectional forms are related to the local pressure resistance in the fore- and aft-body shapes, cargo boundaries, interaction between the hull and propeller, etc. These relationships indicate that the hull sections need to be optimized in order to minimize the local resistance. The volumetric balanced (VOB) variation of ship hull forms has been suggested by Kim (2013) as a generalized, systematic variation method for determining the sectional area curves in hull form design. This method is characterized by form parameters and is based on an optimization technique. This paper emphasizes on an extensional function of the VOB considering a geometrical wave profile. We select a container ship and an LNG carrier to demonstrate the applicability of the proposed technique. Through analysis, we confirm that the VOB method, considering the geometrical wave profile, can be used as an efficient tool in the hull form design for ships.