• Journal of Biomedical Engineering Research
• /
• v.21 no.3 s.61
• /
• pp.273-277
• /
• 2000

The galvanostatic anodization of commercially Pure titanium plate (c.p.Ti, grade 2) was investigated in various concentrations of aqueous $H_3PO_4$ from 0.05M to 0.7M. The surfaces of anodic oxide films, formed by the current density in the range between 0.3 and $l.0 A/dm^2$. were analyzed by SEM and XRD. The voltage-time (V-T) curves displayed an initial linear part and a subsequent parabolic part, and the initial slopes increased with an increase in the current density in 0.05M $H_3PO_4$. As the concentration of the electrolyte increased, the V-T corves exhibit no change but the final voltage decreased. The anodic oxide film of titanium developed from fine grains to snowflake-like grains in a layered structure with an increase in the concentration of the electrolyte and current density. Sparking at the interface of the oxide/electrolyte accompanied the local deposition and dissolution of the oxide film through discharging. The crystallinity of the anodic oxide film increased with the anodizing voltage and decreased with an increase in the concentration of the electrolyte.

• Archives of design research
• /
• v.17 no.4
• /
• pp.201-210
• /
• 2004

This study is to analyze the present situation of Incheon design and to research Incheon industrial design with the special character of the city. Next, the final purpose is to apply this study for the Incheon International Design Competition event that will be held first time sponsored by Incheon Metropolitan. Incheon is Metropolitan which has 2.6 million people and the entrance of seoul Metropolitan which is the center of export industry and one of the greatest industrial city. It is growing the hub of International trade city of the twenty-first centry due to the opening of Incheon International Airport and the new development of Song-do city. The industrial structure of Incheon is mostly consist of small industry centered which has a lack of design development capacity, and it has a little insufficient design-related institutes which can educate the design personnel. It has only two universities and six junior colleges. Especially, design-related academics and exhibitions are rare nearby Seoul area. I will contribute the study which makes the industrial character and the necessity of design that can be possible through the Incheon International Design Exhibition, and it will promote the backward design industry and economy of Incheon that compared to other regions of Korea. And, I am going to utilize as basic data bases for exercising advanced Incheon Industrial Design Competition. Furthermore, I would like to contribute the image improvement of new International Incheon Metropolitan through the training of excellent design experts and finding design-related personnels which can be accomplished the cooperation among local autonomy, industries and schools.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.3
• /
• pp.639-647
• /
• 2011

In this paper, we introduce a design methodology of data-centroid Radial Basis Function neural networks with extended polynomial function. The two underlying design mechanisms of such networks involve K-means clustering method and Particle Swarm Optimization(PSO). The proposed algorithm is based on K-means clustering method for efficient processing of data and the optimization of model was carried out using PSO. In this paper, as the connection weight of RBF neural networks, we are able to use four types of polynomials such as simplified, linear, quadratic, and modified quadratic. Using K-means clustering, the center values of Gaussian function as activation function are selected. And the PSO-based RBF neural networks results in a structurally optimized structure and comes with a higher level of flexibility than the one encountered in the conventional RBF neural networks. The PSO-based design procedure being applied at each node of RBF neural networks leads to the selection of preferred parameters with specific local characteristics (such as the number of input variables, a specific set of input variables, and the distribution constant value in activation function) available within the RBF neural networks. To evaluate the performance of the proposed data-centroid RBF neural network with extended polynomial function, the model is experimented with using the nonlinear process data(2-Dimensional synthetic data and Mackey-Glass time series process data) and the Machine Learning dataset(NOx emission process data in gas turbine plant, Automobile Miles per Gallon(MPG) data, and Boston housing data). For the characteristic analysis of the given entire dataset with non-linearity as well as the efficient construction and evaluation of the dynamic network model, the partition of the given entire dataset distinguishes between two cases of Division I(training dataset and testing dataset) and Division II(training dataset, validation dataset, and testing dataset). A comparative analysis shows that the proposed RBF neural networks produces model with higher accuracy as well as more superb predictive capability than other intelligent models presented previously.

• Journal of Pharmacopuncture
• /
• v.18 no.2
• /
• pp.7-18
• /
• 2015

Objectives: Lawsone (1,4 naphthoquinone) is a non redox cycling compound that can be catalyzed by DT diaphorase (DTD) into 1,2,4-trihydroxynaphthalene (THN), which can generate reactive oxygen species by auto oxidation. The purpose of this study was to evaluate the toxicity of the phytomarker 1,4 naphthoquinone and its metabolite THN by using the molecular docking program AutoDock 4. Methods: The 3D structure of ligands such as hydrogen peroxide ($H_2O_2$), nitric oxide synthase (NOS), catalase (CAT), glutathione (GSH), glutathione reductase (GR), glucose 6-phosphate dehydrogenase (G6PDH) and nicotinamide adenine dinucleotide phosphate hydrogen (NADPH) were drawn using hyperchem drawing tools and minimizing the energy of all pdb files with the help of hyperchem by $MM^+$ followed by a semi-empirical (PM3) method. The docking process was studied with ligand molecules to identify suitable dockings at protein binding sites through annealing and genetic simulation algorithms. The program auto dock tools (ADT) was released as an extension suite to the python molecular viewer used to prepare proteins and ligands. Grids centered on active sites were obtained with spacings of $54{\times}55{\times}56$, and a grid spacing of 0.503 was calculated. Comparisons of Global and Local Search Methods in Drug Docking were adopted to determine parameters; a maximum number of 250,000 energy evaluations, a maximum number of generations of 27,000, and mutation and crossover rates of 0.02 and 0.8 were used. The number of docking runs was set to 10. Results: Lawsone and THN can be considered to efficiently bind with NOS, CAT, GSH, GR, G6PDH and NADPH, which has been confirmed through hydrogen bond affinity with the respective amino acids. Conclusion: Naphthoquinone derivatives of lawsone, which can be metabolized into THN by a catalyst DTD, were examined. Lawsone and THN were found to be identically potent molecules for their affinities for selected proteins.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6360-6367
• /
• 2015

The location selection of the element that should guarantee easy visual perception, like the landmark, is the a topic that appears much in the design process. Recently, a graph analysis technique using computers has been applied in order to evaluate the visibility of the visual element, but the analytic frame is flat and the setting of the visual pont and the matrix are fixed so there were great limitations in obtaining the results of the practical analysis. Thus, this study presented Nondirectional Multi-Dimensional Calculation (MDVC-N), an analytic methodology available for the analysis of the dynamic visual point in the 3D environment. It thus attempted to establish the analytic application using the 3D computer graphics technology and designed a script structure to set the visual point and the matrix. In addition to that, this study tried to verify the analytic methodology by applying the complex land as an example model, where buildings in various heights of terrains with a high-differences are located, verifying the same analytic methodology. It thus tried to identify the visual characteristics of each alternative location. The following results were gained from the study. 1) The visibility can be measured quantitatively trough the application of the 6-alternatives. 2) Using the 3dimensional graph, intuitive analysis was possible. 3) It attempted to improve the analytic applicability by calculating the results corrected as a variable behavior from the local integration variable of the space syntax.

• Journal of KIISE:Information Networking
• /
• v.30 no.3
• /
• pp.407-415
• /
• 2003

As services requesting data transfer from a sender to a multiple number of receivers become popular, efficient group communication mechanisms like multicast get much attention. Since multicast is more efficient than unicast in terms of bandwidth usage and group management for group communication, many multicast protocols providing scalability and reliability have been proposed. Recently, router-supported reliable multicast protocols have been proposed because routers have the knowledge of the physical multicast tree structure and, in this scheme, repliers which retransmit lost packets are selected by routers. Repliers are selected dynamically based on the network situation, therefore, any receiver within a multicast group can become a replier Hence, all receivers within a group maintains a buffer for loss recovery within which received packets are stored. It is an overhead for all group receivers to store unnecessary packets. Therefore, in this paper, we propose a new scheme which reduces resource usage by discarding packets unnecessary for loss recovery from the receiver buffer. Our scheme performs the replier selection and the loss recovery of lost packets based on the LSM [1] model, and discards unnecessary packets determined by ACKs from erasers which represent local groups.

• The KIPS Transactions:PartA
• /
• v.13A no.2 s.99
• /
• pp.111-122
• /
• 2006

As VOD service over the Internet becomes popular, a large sealable VOD system in P2P streaming environment has become increasing important. In this paper, we propose a new proxy caching scheme, called P2Proxy, to replace the traditional proxy with a sealable P2P proxy in P2P streaming environment. In the proposed scheme, each client in a group stores a different part of the stream from a server into its local buffer and then uses a group of clients as a proxy. Each client receives the request stream from other clients as long as the parts of the stream are available in the client group. The only missing parts of the stream which are not in the client group are directly received from the server. We represent the caching process between clients in a group and a server and then describe a group creation process. This paper proposes the directory structure to share the caching information among clients. By using the directory information, we minimize message exchange overload for a stream caching and playing. We also propose a recovery method for failures about the irregular behavior of P2P clients. In this paper, we evaluate the performance of our proposed scheme and compare the performance with the existing P2P streaming systems.

• Korean Journal of Remote Sensing
• /
• v.31 no.6
• /
• pp.571-582
• /
• 2015

This paper proposes a scheme to reduce spectral distortion in PAN-sharpening which produces a MultiSpectral image (MS) with the higher resolution of PANchromatic image (PAN). The spectral distortion results from reconstructing spatial details of PAN image in the MS image. The proposed method employs Spectral Adjustment and Anisotropic Diffusion to make a reduction of the distortion. The spectral adjustment makes the PAN-sharpened image agree with the original MS image, but causes block distortion because the spectral response of a pixel in the lower resolution is assumed to be equal to the average response of the pixels belonging to the corresponding area in the higher resolution at a same wavelength. The block distortion is corrected by the anisotropic diffusion which uses a conduct coefficient estimating from a local computation of PAN image. It results in yielding a PAN-sharpened image with the spatial structure of PAN image. GSA is one of PAN-sharpening techniques which are efficient in computation as well as good in quantitative quality evaluation. This study suggests the GSA as a preliminary PAN-sharpening method. Two data sets were used in the experiment to evaluate the proposed scheme. One is a Dubaisat-2 image of $1024{\times}1024$ observed at Los Angeles area, USA on February, 2014, the other is an IKONOS of $2048{\times}2048$ observed at Anyang, Korea on March, 2002. The experimental results show that the proposed scheme yields the PAN-sharpened images which have much less spectral distortion and better quantitative quality evaluation.

• Informatization Policy
• /
• v.24 no.3
• /
• pp.67-90
• /
• 2017

This study is conducted to find out problems in the implementation system of regional informatization policies in Korea and solutions to enhance the effectiveness in policy execution. The study uses research methodologies such as participant observation, interview and AHP for experts and employees of public organizations for regional informatization policies. Many implications were found in the analysis, including that policy relations, structure of the policy implementation system, and environment and contents of regional informatization policiesin Korea have to be innovated and re-organized. Especially, this paper emphasizes the horizontal and cooperative relationship between the central and local governments and redesigning of the legal system on the regional informatization. This paper also shows expectations on reshaping of the regional informatization policies with the paradigm shift of the government power toward decentralization. This paper also finds diverse views on the problems and solutions for the regional informatization policy implementation system based on different characteristics and interests of policy participants. This paper finds the possibility of applying the policy network model to regional informatization policy implementation, which can be supported by Rhodes & Marsh(1992)'s theory. Therefore, this paper shows the change of regional informatization policies can be expected through application of the policy network. Although the paper draws many academic and policy implications, they are limited to the implementation system of regional informatization policies only.

• Korean Journal of Optics and Photonics
• /
• v.9 no.2
• /
• pp.111-116
• /
• 1998

Thirteen InGaAs/InGaAsP separate-confinement heterostructure multiple quantum well lasers were designed such that the strain in the active layer from 0.9% compressive strain to 1.4% tensile, and their threshold current density was caluculated to see the effects of strain on the threshold current density. The well width was adjusted such that the bandgap of the quantum well is 1.55 ${\mu}{\textrm}{m}$, For the calculation of the band structure and transition matrix element needed for the gain calculation, a block diagonalized 8$\times$8 second-order $\to{k}.\to{p}$ Hamiltonian was used to incorporate the conduction band nonparabolicity and the valence band mixing. The threshold current density shows discontinuity at 0.4% tensile strain where the first heavy-hole subband and the first light-hole subband cross and at 0.5% tensile strain where the second conduction subband begins to exist. The threshold current density at room temperature has a maximum around these 0.4-0.5% tensile strains, and as strain varies in either direction it decreases first and then increases a little after a local minimum. This calculated trend is consistent with the other reported experimental results. We discussed the results of this calculation in comparison with other theoretical or experimental papers on the effect of strain.