• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.25 no.2
• /
• pp.96-98
• /
• 2014

Injection laryngoplasty is simple and useful procedure in patient with vocal cord paralysis even under local anesthesia. For approaching vocal cord level, flexibility of neck mobility is required to operate injection laryngoplasty but it is relatively difficult to approach vocal cord in patient who has cervical fixations. Laryngeal mask airway (LMA) can be helpful:We use a LMA (I-gel$^{TM}$) during intubation without neck extension on flat supine position under general anesthesia and have a good operation filed. LMA with swivel connector give surgeons better surgical vision and make insertion of fibroscope easily during operation. Hyaluronic acid injection was done use needle (25 G, 5 cm) via percutaneous cricothyroid space : This procedure can be useful method for patients who suffer from not only weak voice but also dysphagia and aspiration high vagal palsy patient after spine surgery or uncooperative with awake injection laryngoplasty.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.671-673
• /
• 2016

In image data, noise occurs due to various external factors in the process of obtaining and transmitting. There are various types of noise according to the cause and form and research to remove this noise is being continued. Therefore the study suggested a way to filter to restore images damaged by salt and pepper noise which preserves non-noise signal and processes noise signal by expanding mask size according to the local mask noise density. In addition, as an objective evaluation standard of improvements, the study used PSNR(peak signal to noise ratio) to compare with previous methods.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.86-91
• /
• 2005

The stack, the core unit of the MCFC system, is composed of the three main parts which are the electrodes, the matrix keeping the electrolyte and the separator. Among these, the separator made of low carbon steel is manufactured by some sheet metal forming processes. The flatness of flange of the mask plate of the separator is crucial not only to enhance the stack performance but also to reduce the production cost. This study has focused on the enhancement of flatness of the mask plate flange by controlling some process parameters like the punch and die comer radii, the blank holding force, the friction coefficient and so on. The springback phenomenon occurring in the flange drawing process has been studied first using the finite element method (FEM) in order to understand what causes the springback. The distribution pattern of local longitudinal stress in the flanged part has been revealed very important in predicting the final shape of the flange. This fact has been backed up by the experimental results carried out with the developed test dies.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.67-68
• /
• 2002

The properties and mechanism of silicon protuberance and groove processing by diamond tip sliding using atomic force microscope (AFM) in atmosphere were studied. To control the height of protuberance and the depth of groove, the processed height and depth depended on load and diamond tip radius were evaluated. Nanoprotuberances and grooves were fabricated on a silicon surface by approximately 100-nm-radius diamond tip sliding using an atomic force microscope in atmosphere. To clarify the mechanical and chemical properties of these parts processed, changes in the protuberance and groove profiles due to additional diamond tip sliding and potassium hydroxide (KOH) solution etching were evaluated. Processed protuberances were negligibly removed, and processed grooves were easily removed by additional diamond tip sliding. The KOH solution selectively etched the unprocessed silicon area. while the protuberances, grooves and flat surfaces processed by diamond tip sliding were negligibly etched. Three-dimensional nanofabrication is performed in this study by utilizing these mechanic-chemically processed parts as protective etching mask for KOH solution etching.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.871-874
• /
• 2004

Fabrication of a high-resolution shadow mask, or called nanostencil, is presented. This high-resolution shadowmask is fabricated by a combination of MEMS processes and focused ion beam (FIB) milling. 500 nm thick and 2x2 mm large membranes are made on a silicon wafer by micro-fabrication processes of LPCVD, photolithography, ICP etching and bulk silicon etching. Subsequent FIB milling enabled local membrane thinning and aperture making into the thinned silicon nitride membrane. Due to high resolution of FIB milling process, nanoscale apertures down to 70 nm could be made into the membrane.

• The KIPS Transactions:PartB
• /
• v.8B no.2
• /
• pp.189-194
• /
• 2001

본 논문에서는 개인 식별을 위하여 복수 해상도 구조를 제시하였고 이 방법으로 구순문 인식을 구현하였다. 구순문 인식은 지문, 음성 패턴, 홍채 패턴과 얼굴 인식과 같은 신체적 특징에 비하여 상대적으로 연구가 많이 이루어지지 않은 신체적 특징이다. 구순문은 CCD 카메라를 이용할 경우 홍채나 얼굴 패턴 같은 다른 특징 요소와 연결하여 인식 시스템을 구축할 수 있는 장점을 가지고 있다. 구순문 인식을 위해 pattern kernels를 이용한 새로운 방법을 제시하였다. Pattern kernels는 여러 개의 local lip print mask들로 구성된 함수이며, lip print의 정보를 디지털 데이터로 전환시켜 준다. 복수 해상도를 가지는 인식 시스템은 단일 해상도의 시스템보다 더욱 신뢰적이며 인식률도 높다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.11
• /
• pp.2029-2036
• /
• 2017

Currently, the demand for multimedia services is increasing with the rapid development of the digital age. Image data is corrupted by various noises and typical noise is mainly AWGN, salt and pepper noise and the complex noise that these two noises are mixed. Therefore, in this paper, the noise is processed by classifying AWGN and salt and pepper noise through noise judgment. In the case of AWGN, the outputs of spatial weighted filter and pixel change weighted filter are composed and processed, and the composite weights are applied differently according to the standard deviation of the local mask. In the case of salt and pepper noise, cubic spline interpolation and local histogram weighted filters are composed and processed. This study suggested the multiple image restoration filter algorithm which is processed by applying different composite weights according to the salt and pepper noise density of the local mask.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.77-81
• /
• 2000

The content of this paper is concerned with guard band and technical standard for wireless local loop facilities will be used at 260Hz domestic frequency band. In order to determine guard band between wireless local loop providers, this paper analyze radio interferences from radio station used adjacent frequency band. The paper proposes draft Out-of-Block Emission Mask of for wireless focal loop facilities in accordance with ITU-R Recommendation and ARIB Standard in Japan

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.1
• /
• pp.53-62
• /
• 2001

In this paper, the hybrid function by local scale control is proposed to detect the optimal edges from blurred images. In the case of image capturing, some blurring is occurred by the characteristics of the illumination and the reflected light. During processing the blurred image, it is difficult to detect perfect edges. This algorithm proposed a new hybrid function which is merged Gaussian function and the second derivative of Gaussian function. And it detects the optimal edges applying directional edge detection by Canny algorithm as the scale factor of $\sigma$ in the given local mask has been changed after convolving the hybrid function for input image. In the result, the performance is confirmed that this algorithm is better than Sobel, Robert and Canny edge detector by analyzing the some test images. And the results is obtained 0.2 ㏈ ~ 14 ㏈ of PSNR than those conventional method.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.2
• /
• pp.76-82
• /
• 2011

In this paper, we propose the technique to detect the location and size of the small target in multi-resolution image using cubic facet model. The input image is reduced by the multi-resolution and we obtain the multi-resolution images. We apply the facet model and the local maxima conditions to the multi-resolution images of each level. And then, we detect the location of the small target. We estimate that the location at the maximum of the $D_2$ which means the local maxima value of the facet model in the multi-resolution images is the location of the small target. We can detect the small target of the various size about the multi-resolution images of each level. In this paper, we experimented in the various infrared images with the small target. The method using the typical facet model applies a mask. However, the proposed method applies a mask in the multi-resolution images. We verified to vary the mask size and differ the size of the small target. The proposed algorithm can detect the location and size of the small target.