• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.4
• /
• pp.499-505
• /
• 1998

In developing an automated surface inspect algorithm, we have designed a hierarchical classifier using neural network. The defects which exist on the surface of cold mill strip have a scattering or singular distribution. We have considered three major problems, that is preprocessing, feature extraction and defect classification. In preprocessing, Top-hit transform, adaptive thresholding, thinning and noise rejection are used Especially, Top-hit transform using local minimax operation diminishes the effect of bad lighting. In feature extraction, geometric, moment, co-occurrence matrix, and histogram ratio features are calculated. The histogram ratio feature is taken from the gray-level image. For defect classification, we suggest a hierarchical structure of which nodes are multilayer neural network classifiers. The proposed algorithm reduced error rate by comparing to one-stage structure.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2000.11a
• /
• pp.25-29
• /
• 2000

Nowadays, natural resource are running out and the level of the environment contamination is getting serious. To solve these problems, each country and institute tend to need many-sided researchs and developments. At this point, especially, there are many coal-mines in Jung-sun and Tae-back where are located in Kangwon province. By the way the abandoned mines cause not only local economy collapse but also environment contamination by submergence of stony mountains. The counterplan is positively inquired further examination by the government. Consequently, we hope that the recycle of polymer concrete can reduce the environment contamination, suggest the new direction of Green Design and can be switched over high added value goods. In conclusion, the recycle of polymer concrete will be valuable.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.150-155
• /
• 2011

It is a wide range of types of building materials. Depending on the flow of time for the increased interest in building appearance of quality new and different materials are being developed. In particular, the case of granite widely used as cladding, recently, China's low-cost stone disguised as a large number of local granite stone as the domestic industry has been a big hit. Therefore, the purpose of study is establishment of the database for granite building exterior materials. For that, the domestic granite and chinese granite are selected. The spectrums of these material are investigated and analyzed.

• Asian Journal of Innovation and Policy
• /
• v.11 no.3
• /
• pp.320-341
• /
• 2022

Empirical applications to explain criminogenic events are abundant. While much of the research in criminal studies concentrates on understanding the motivations of offenders and preventing victimization from a micro perspective, there have been recent theoretical advancements that give priority to the role of spatial factors in directly impacting crime rates. The primary purpose of this study is to investigate the empirical inference between violent crime incidence and spatial characteristics of local areas focusing particularly on spatial accessibility conditions in the areas. Applying discrete spatial econometrics models, this study reveals a significant relationship between spatial accessibility and the formation of violent crime hot spots in South Korea. Along with other variables, it is revealed that road accessibility has a clear association with violent crime hot spots. Based on the findings, this study suggests some policy implications such as effective surveillance systems, land use restrictions, and advanced street lighting.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.783-785
• /
• 2015

Automotive Semiconductor revenue grew 3.9% in 2013 to $26.7 billion, driven by strength in LED lighting, ASSPs and analog ICs. Renesas Electronics held onto the No.1 spot despite a revenue decline, while Freescale Semiconductor, NXP, Texas Instruments and Robert Bosch made strong gains. Global Semiconductor manufacturers are paying attention to the Korean auto market, which reflects the reality of the local auto industry. The local industry has a long way go in the automotive semiconductor sector, even though it has grown to become the six-largest in the world. The reason for global semiconductors companies' interest in the local market lies in the fact that are the use of semiconductors in cars is on the rise, since smart and eco-friendly cars are becoming popular.

• Journal of the Korean Society of Costume
• /
• v.60 no.2
• /
• pp.51-67
• /
• 2010

The purpose of this study was to develop the high value-added cultural product design with local cultural resources, and to contribute to promoting cultural tourism festivals. To accomplish this study, first, a preliminary survey is carried out the investigation of cultural product stores and visitors' questionnaire survey. Next, based on these survey and prior study, this study established the development direction and concept of fashion cultural products and to developed fashion cultural products using local cultural resources. Adobe Photoshop 6.0, and Adobe Illustrator CS Program were used for the standardization of patterns, textile design and illustration. The results of this study were as follows; First, based on preliminary research results, the problems of the design of cultural tourism festival products were derived. As one solution to solve this problem, this study established the development direction and concept of fashion cultural products to develop fashion cultural products. The concept of the Andong Maskdance Festival was 'Tribal-Holic'; the Boryeong Mud Festival, 'Get away form it all'; the Gangjin Celadon Festival, 'Timeless Memories'; the Jinju Namgang Yudeung Festival, 'Lighting up the River'; the Chungju World Martial Arts Festival, 'Next Ergonomics Gym'; and the Muju Firefly Festival, 'Eco-Purity'. Second, based on the desired items of festival organizers and the survey of visitor's preference for cultural products, 4 items were selected by festival type. Then a total of 96 designs of 4 kinds each were developed using logos or characters, traditional patterns, special products, symbolizing region, or festival as a motif. Third, the strategy for development of cultural products design for promotion of cultural tourism festivals were 'Place identity design strategy', 'Market oriented design strategy', 'Buyer-Based pricing strategy', 'Regional brand strategy', and 'Distribution networks expansion strategy'.

• Journal of Environmental Science International
• /
• v.25 no.1
• /
• pp.107-125
• /
• 2016

Long-term variations of $PM_{10}$ and the characteristics of local meteorology related to its concentration changes were analyzed at 4 air quality sites (Ido-dong, Yeon-dong, Donghong-dong, and Gosan) in Jeju during two different periods, such as PI (2001-2006) and PII (2007-2013), over a 13-year period. Overall, the long-term trend of $PM_{10}$ was very slightly downward during the whole study period, while the high $PM_{10}$ concentrations in PII were observed more frequently than those in PI. The concentration variations of $PM_{10}$ during the study period was clarified in correlation between $PM_{10}$ and meteorological variables, e.g. the low (high) $PM_{10}$ concentration with large (small) precipitation or high (low) radiation and in part high $PM_{10}$ concentrations (especially, Donghong-dong and Gosan) with strong wind speed and the westerly/northwesterly winds. This was likely to be caused by the transport effect (from the polluted regions of China) rather than the contribution of local emission sources. The $PM_{10}$ concentrations in "Asian dust" and "Haze" weather types were higher, whereas those in "Precipitation", "Fog", and "Thunder and Lighting" weather types were lower. The contribution of long-range transport to the observed $PM_{10}$ levels in the urban center (Ido-dong, Yeon-dong, and Donghong-dong), if estimated by comparison to the data of the background site (Gosan), was found to explain about 80% (on average) of its input.

• Journal of the Korean housing association
• /
• v.21 no.4
• /
• pp.23-31
• /
• 2010

This study aims to examine the educational function space of university dormitories at local universities with corridor centered structure in Honam area regions based on direct and indirect parameters on the whole satisfaction of users in residential environment factors and personal characteristics. First, according to relations among parameters, educational and cultural activities of four major activities within the dormitory had indirect influences on social activities, eating and sleeping activities had no direct influence on other activities. And social activity had direct influence on the general satisfaction as an important parameter and educational and cultural activities had indirect influence on the whole satisfaction through social activities. Detailed results show that, in the first educational activities directly affecting the lighting and air conditioning facilities (0.22), safety (0.326), Territoriality (0.327), the space density (-0.167), directions (-0.166) and yeohyang having personal characteristics and the safety of the second cultural activities (0.183), Territoriality (0.361), Aesthetics (-0.13) and the personal characteristics Sex (-0.179), the direct effect, third, and erosion has a direct impact on activity The flexibility of the space factor (-0.128) and Territoriality (0.38) and the personal characteristics grade (0.172), respectively. Fourth in social activities directly affecting the pathfinding (-0.104), and parameter, education (0.388) and cultural activities (0.445), and some of the factors affecting the indirect lighting and air conditioning facilities, safety, and Territoriality, the space density, directions, grade, they could influence through educational activities to be analyzed. That is, territoriality in educational function space is the important factor that users react very sensitively in educational, eating and sleeping activities and educational function space must secure area and division considering personal and public use as the space accommodating activity which is lacking in unit residential space. Accordingly, the safety of educational function space in university dormitory is considered as the fundamental safety matter on the fire prevention, hygiene and cleanness for users in the satisfaction of educational and cultural activities.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.4
• /
• pp.289-298
• /
• 2014

Purpose: This study was designed to investigate the present conditions of illumination techniques in dental laboratories in order to distinguish colors for esthetic dentistry. Materials and Methods: A total of forty-eight local dental laboratories were selected for sampling a) luminous intensity and b) color temperature. We measured the luminous intensity and the color temperature on a center point of porcelain table with lux meter and color meter respectively. The measurements were performed twice, once on a clear day and on a cloudy day between 12 pm and 2 pm (day light and artificial illumination) and between 7 pm and 10 pm (artificial illumination only). Results: The results obtained were as follows. 1. The average luminous intensity in dental laboratories lighting was 1871 lx, and 67% of dental laboratories had luminous intensity greater than 1600 lx, which was appropriate for operations related to colors, while 33% of dental laboratories had in sufficient lighting for appropriate luminous intensity. 2. The average color temperature in dental laboratories lighting was 6506 K, which was inappropriate for operations related to color. None of the dental laboratories had a color temperature range of 5000 - 5500 K, which is appropriate for operations related to colors. 3. Between daytime and nighttime, also between clear day and cloudy day, the average luminous intensity and color temperature in dental laboratories were not significantly different. Conclusion: Illumination in most dental laboratories selected in this study was inappropriate for operations related to color.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.581-584
• /
• 2009

Recently, the cameras which used for observation are installed in children protection area and local crime prevention area in order to protect life and property and by its work being recognized and are installed more. Normal cameras have cost problem to observe multiple area and detail, because they can observe only one place. PTZ camera can observe multiple area by moving focus by schedule or remote control, but it can't automatically move the focus of it to the place where event occurred, because it can't recognize the place. In this study, we can monitor multiple area effectively, by installing a wireless sensor node equipped with temperature, lighting, gas and human detection sensor to each area, to monitor many place low-price and actively and to move the focus of PTZ camera to preset position, and send recorded video to the user, when the various sensor data received from wireless sensors in observation area are to be determined abnormal by analyzing. In addition, at night we can record a scene using infrared, but to reduce power consumption of lighting system which are installed to improve resolution, it supplies power to the lighting system when event occurred. So we were able to implement low power green monitoring system.