• 문화기술의 융합
• /
• 제4권1호
• /
• pp.225-230
• /
• 2018

지역 브랜드는 지역의 인지도와 지역 농산물의 마케팅에 매우 효과적인 방법으로 많은 지방자치단체들이 지역 브랜딩이 관심을 갖고 추진하고 있다. 지역 브랜드는 지역의 매력을 가장 정확하고 뚜렷하게 나타내 줄 수 있는 대표성, 선명성이 있어야 하며, 지역의 특성과 이미지를 가장 잘 연상, 전달할 수 있는 지역성과 차별성을 갖추어야 한다. 지역브랜드는 그 유형에 따라 지역정체성 브랜드와 지역산물 브랜드로 구분이 가능하며, 자연자원형, 문화자원형, 상품자원형, 서비스자원형으로도 유형이 구분되기도 한다. 충청남도의 경우 많은 지역산물에 포커스를 맞춘 지역브랜드를 육성하고 있다. 그러나 충청남도의 지역산물 브랜드의 경우 아직 그 인지도와 신뢰도가 낮아서 지역의 대표성, 이미지를 충분히 커뮤니케이션 하기에 한계가 있으므로 이를 극복하는 것이 앞으로의 지역브랜드 성공을 위한 과제로 대두된다.

• 한국자동차공학회논문집
• /
• 제7권6호
• /
• pp.270-278
• /
• 1999

This paper describes the collapse characteristics of the rectangular tube under eccentric compressive load. Overall buckling stress and bifurcation criterion (slenderness ration)are investigated. modified secant formula(MSF) is proposed to decide overall buckling stress. The bifurcation criterion which can distinguish between the local and overall buckling mode shapes is suggest by equating the local and overall buckling stresses. Additionally the effect of initial imperfection on bifurcation criterion is investigated.

• 전자공학회논문지B
• /
• 제29B권7호
• /
• pp.62-69
• /
• 1992

The conventional BMA is performed with the fixed block size. For better performance at low bitrate, the block size is required to be large in relatively stationary area, while small in moving area. Thus, in this paper, a video coding technique using variable block size model is proposed. It decides the block size based on the degree of local motion defined by the local mean and variance of blocks. Computer simulation shows that the proposed method gives comparable performance to the conventional one with less bits required for motion vector coding.

• Korea-Australia Rheology Journal
• /
• 제15권1호
• /
• pp.19-25
• /
• 2003

Since the microstructure of functional thin films depends on the dispersion characteristics of dense slurry, it is important to control the agglomerative nature of slurries under processing. The present authors have been discussing the model prediction of agglomerative nature and local rate of agglomeration in dense suspensions. The experiments have been peformed under shear flow using the nearly spherical and oblate type graphite particles. In this study, the experiment has been conducted using water and glycerol as dispersion media. Stress control type rheometer was used to measure the slurry rheology. Local agglomeration of graphite particles has been predicted by using Usui's model. The experimental results show that both the shape and slurry processing method affect on the local dispersion condition. The agglomeration formed by oblate type graphite particles seems to be more difficult to break up than that of spherical particles.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.49-54
• /
• 2004

Several cell models, so-called local approach, have been proposed as engineering approaches to numerically simulate ductile fracture characteristics. In this paper, two- and three-dimensional finite element analyses incorporating both modified GTN and Rousselier models were carried out. Smooth and notched bars and CT25 specimens were assessed for StE460 and DIN22NiMoCr37 materials which were quoted from previous researches. Micro-mechanical parameters used in the assessment were established by fitting the numerical results with the experiments, and J-R curves derived from the simulations were found to be in good agreement with the corresponding experimental results.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.69-72
• /
• 2008

The local water contents and water transfer characteristics in the PEMFC system were investigated by numerical simulations and experiments. The performance of a lab-scale PEMFC is measured for fully humidified gases conditions and non-humidified ones. In order to observe the local water contents and water transfer characteristics inside PEMFC, the numerical simulation using CFD module on STAR-CD(es-pemfc) were conducted. The results show that the water content was increased as increasing current density, whereas it was decreased in high current density region. Then there was close correlation between high water content and internal temperature inside of MEA, and high current density was observed when internal temperature was dramatically increased.

• 한국산업융합학회 논문집
• /
• 제5권3호
• /
• pp.193-200
• /
• 2002

An experimental study was performed to study heat transfer characteristics for turbulent flow in an axisymmetric annuli. The air flow temperature and the local Nusselt number in turbulent flow were measured or calculated for Re=30,000, 40,000, 50,000, 60,000, 70,000 and 80,000. The local Nusselts number were compared to that obtained from Dittus-Boelter equation with turbulent flow. The results show that the flow enhances the heat transfer in the initial and exit portion of the test tube.

• 설비공학논문집
• /
• 제13권4호
• /
• pp.262-270
• /
• 2001

This paper deals with a prediction method for the condensation of ternary refrigerant mixture inside a horizontal smooth tube. Based on some reliable assumptions, the governing equations for the local heat and mass transfer characteristics are derived, and the prediction for the condensation of ternary zeotropic refrigerant mixtures composed of HFC32/HFC125/HFC134a, including R407C, is carried out. The local values of vapor quality, thermodynamic states at bulk vapor, vapor-liquid interface and bulk liquid, mass flux etc. are obtained for a constant wall temperature and a constant wall heat flux conditions, and the effects of the composition of HFC32/HFC125/HFC134a on heat transfer characteristics are examined. The prediction result is also compared with experimental data for condensation of ternary refrigerant mixtures. The predicted wall temperature distribution has a similar trend with experimental data but the predicted local heat transfer coefficients are 20-30% higher than the experimental data.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1401-1404
• /
• 2008

Temperature Compensation Method of Local Dimming LED Backlight System is proposed. The luminance levels of the LED backlight are not stable over temperature and time due to the inherent characteristics of the LED. The characteristics of LED backlight are investigated and a temperature compensation method is presented. The image distortion caused by temperature variation of LED block can be effectively compensated by the proposed temperature compensation method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.103-106
• /
• 2001

A new control method for a redundant manipulator is developed using a local optimal torque and null space joint velocity. By solving the dynamic control equations of the system, the local optimal torque is obtained. If only the local optimal torque is used for controlling the robot there is a possibility that the system is unstable. To eliminate the characteristics of instability during the movements, the control law with a null space concept is used. The new method is applied to the 3-DOF planar manipulator. The simulation results show the effectiveness of the proposed algorithm.