• 한국농공학회논문집
• /
• 제50권2호
• /
• pp.19-26
• /
• 2008

This study has been carried out to investigate the dynamic characteristics of RC slabs. For this purpose, the 20-node solid element has been used to discretize the RC slabs into two parts of concrete and rebar. The material non-linearity considering elasto-visco plastic model and the smeared crack model have been adopted in the finite element formulation. The applied load can handle step load, load intensity of harmonic load, area of distributed load and frequency. The frequency of harmonic load has an significant effect on dynamic behaviour in terms of displacement. As the frequency is increased, the effect of load amplitude is more serious. Especially, if the frequency of harmonic load exceeds 30 Hz, it is noted that the displacement by harmonic load is greater than that by step load. In case of harmonic load, the damping effect shows no certain tendency with respect to frequency of load. In details, the damping is effective when the frequency of harmonic load is 2 Hz, but there is no consistent tendency according to damping ratio. The dynamic response when the frequency of harmonic load is 3 Hz shows same result for undamped case as well as for damped case with 5% damping ratio. It is also noted that we can get the largest deflection for damped case with 1% damping ratio. However, there is not any damping effect when the frequency of harmonic load is greater than 4 Hz.

• 산업공학
• /
• 제15권1호
• /
• pp.1-9
• /
• 2002

Tandem AGV system is obtained by partitioning all workstations into multiple zones assigning a single vehicle to each zone. In this paper, we propose an analytical model to design a tandem AGV system with multi-load AGVs. Using simulation, the performance of the proposed model is shown by comparing a conventional multi-load AGV system.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 춘계학술대회 논문집
• /
• pp.260-264
• /
• 2007

Many load modeling concepts have been proposed in the past. Efforts of load modeling may be summarized into three approaches ; the first one is to find an aggregation of various different load components scattered and distributed in an area. The second one is to find parameters to represent load from field tests, if any. And the third one is how to present the load of motor components could be represented. This paper proposes a system identification of combined load modeling to cover the second approach. In this paper, an improved method of system identification is suggested for the combined load model (dynamic and static load model) in which parameters of the equivalent induction motor. polynomial type load and their compositions.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.319-324
• /
• 1999

This study is to investigate the properties on the load-deflection and fracture behaviors of the steel fiber reinforced concrete(SFRC) slab model specimens, Steel fibers of indent, crimp, and end hook shape were considered to reinforce the matrix under various mixing conditions and proportions. Initial cracking load, maximum load, and energy absorption capacity(load carrying capacity) of SFRC panel specimen increased with increase of steel fiber contents. And the plain concrete slab was fractured abruptly after maximum load but SRFC slabs were fractured smoothly by steel fibers in concrete matrix operated as cracking resistance force after maximum load. Indent, crimp and end hook shape steel fibers were effective in reinforcing the matrices but end hook type fiber were superior to indent and crimp type fibers.

• 한국지반환경공학회 논문집
• /
• 제24권1호
• /
• pp.5-14
• /
• 2023

본 연구에서는 설계 대상인 현장타설말뚝기초에 대하여 상사율을 고려한 하중전이 대형토조 모형시험과 3차원 수치해석을 수행함으로써 현장타설말뚝 선단부와 주면부의 하중전이 특성을 분석하고 하중분담율을 산정하였다. 대형토조 모형시험 및 3차원 수치해석 결과에서 나타난 현장타설말뚝의 선형적 거동으로부터, 본 연구의 설계 조건에 대한 주면하중전이곡선은 Baquelin 등의 제안식, 선단하중전이곡선은 Baquelin 등의 제안식, 수평하중전이곡선은 Reese 등의 제안식이 적정한 것으로 확인되었다. 암반근입부에서 축하중은 시험값이 수치해석값보다 약간 크게 측정되었지만 암반 근입부에서 하중분담율은 연직하중이 증가함에 따라 평균적으로 약 27.8%의 분담율을 나타내었다. 연직재하 시에 말뚝두부의 침하량은 해석값이 시험값보다 약간 작게 평가되었으며, 모형시험 및 해석 최대 연직하중에서 말뚝두부의 최대 침하량은 시험치 10.6mm, 해석치 10.0mm 이고, 말뚝선단에서 최대 침하량은 시험치 2.0mm, 해석치 1.9mm로 나타났다. 수평재하 시에 기둥 두부(지표)와 말뚝 두부에서 수평변위는 시험값과 해석값이 비교적 잘 일치하는 것으로 나타났고, 모형토조시험 결과 최대 수평변위 38.0mm에서 측정된 수평하중은 24,713kN, 수치해석에서의 수평하중은 26,073kN으로 평가되었다.

• 한국지반환경공학회 논문집
• /
• 제13권8호
• /
• pp.57-64
• /
• 2012

본 연구에서는 모형실험을 실시하여 수평하중 작용 시 무리말뚝의 거동을 평가하였다. 암반을 모사한 콘크리트 블럭에 모형말뚝을 말뚝직경(D)의 1배로 근입시키고, 상부에 모래를 1m 깊이로 포설한 $2{\times}3$ 배열의 무리말뚝에 대하여 모형실험을 실시하였다. 그리고 말뚝길이는 11D, 15D와 20D의 세 종류이다. 각 조건에 대한 모형실험의 결과를 수평하중-변위 곡선으로 나타냈으며, 지반 속에서 발생한 말뚝의 변위를 측정하였다. 모형실험 결과, 말뚝 길이/직경의 비(L/D)가 작아질수록 항복하중은 커지고, 항복하중에서의 수평변위는 증가하는 경향을 나타냈다. 도로교설계기준의 수평변위 기준인 15mm에서의 하중을 비교한 결과, L/D가 11, 15, 20에서의 항복하중은 각각 11.7, 6.2, 3.4kN으로 나타났다. 모든 실험 조건에 대하여 지반 속에서 발생한 말뚝의 수평변위는 거의 직선적으로 나타났고, 모형 말뚝이 콘크리트 블록에 소켓된 지점에서 파괴가 발생하였다.

• 설비공학논문집
• /
• 제27권6호
• /
• pp.283-292
• /
• 2015

A model of apartment heating load in a district heating system could be useful in the management and utilization of energy resources, since it could predict energy usage and so could assist in the efficient use of energy resources. The heating load in a district heating system varies in a highly nonlinear manner and is subject to many different factors, such as heating area, number of people living in that complex, and ambient temperature. Thus there are few published papers with accurate models of heating load, especially in domestic literature. This work is concerned with the modeling of apartment heating load in a district heating system in winter, using the reduced least square support vector machine (LS-SVM), and with the purpose of using the model to predict heating energy usage in domestic city area. We collected 23,856 pieces of data on heating energy usage over a 12-week period in winter, from 12 heat exchangers in five apartments. Half of the collected data were used to construct the heating load model, and the other half were used to test the model's accuracy. The model was able to predict the heating energy usage pattern rather accurately. It could also estimate the usage of heating energy within of mean absolute percentage error. This implies that the model prediction accuracy needs to be improved further, but it still could be considered as an acceptable model if we consider the nonlinearity and uncertainty of apartment heating energy usage in a district heating system.

• 한국건설관리학회논문집
• /
• 제19권3호
• /
• pp.70-78
• /
• 2018

기후변화에 대한 우려가 커지면서 건설산업에서도 환경부하를 줄이기 위해 지속적으로 노력하고 있으며, 환경부하를 산정하기 위한 효과적인 방법론으로써 LCA (life cycle assessment)가 제시되고 있다. 그러나, LCA는 환경부하량 산정을 위해 작업에 투입되는 자원량에 대한 정보가 필요하기 때문에 이러한 정보의 확보가 어려운 초기 설계단계의 환경적 검토에는 활용되지 못하고 있다. 이 연구에서는 도로의 배수시설물을 대상으로 표준단면에 기반한 작업물량산출체계를 개발하고 환경부하량을 산출할 수 있는 모델에 활용하였다. 이 모델은 초기 설계단계의 가용정보만으로 LCA에 필요한 자원량을 산정함으로써 환경부하량을 산출할 수 있다. 모델의 유효성을 검증하기 위해 5개의 검증사례를 적용하였으며 원단위추정모델 및 회귀모델과 비교하였다. 그 결과 평균 9.94%의 절대오차율평균을 나타내 다른 모델보다 상대적으로 정확하며 초기 설계단계에서 사용할 수 있는 유효한 모델이라는 점이 확인되었다.

• Coupled systems mechanics
• /
• 제9권4호
• /
• pp.343-358
• /
• 2020

The present research deals with the time-harmonic deformation in transversely isotropic magneto thermoelastic solid with two temperature (2T), rotation due to inclined load and laser pulse. Generalized theory of thermoelasticity has been formulated for this mathematical model. The entire thermo-elastic medium is rotating with uniform angular velocity and subjected to thermally insulated and isothermal boundaries. The inclined load is supposed to be a linear combination of a normal load and a tangential load. The Fourier transform techniques have been used to find the solution to the problem. The displacement components, stress components, and conductive temperature distribution with the horizontal distance are computed in the transformed domain and further calculated in the physical domain using numerical inversion techniques. The effect of angle of inclination of normal and tangential load for Green Lindsay Model and time-harmonic source for Lord Shulman model is depicted graphically on the resulting quantities.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.859-864
• /
• 2001

An effective live load model for analyzing probable maximum live load effects such as moment and shear in transverse direction was developed. The main procedure of this live load model is composed of four parts, i.e., firstly, determination of the appropriate influence lines in longitudinal direction, secondly, application of the characteristics of vehicles and traffic patterns in longitudinal direction, thirdly, determination of the appropriate influence lines in transverse direction, and fourthly, application of the characteristics of vehicles and traffic patterns in transverse direction. Through this procedure, the probabilistic distributions of maximum probable load effects are deduced in the form of probability density function (PDF) and/or cumulative density function(CDF). This live load model is able to consider local or global deterioration of bridges in the structural analysis.