• Journal of Wetlands Research
• /
• v.19 no.3
• /
• pp.359-365
• /
• 2017

Impermeable surfaces such as transportation land uses including roads and parking lots accumulate high heavy metals and particulate matters concentration especially during dry season which worsens the river water quality and distort the water circulation system during rainfall events. Recently, the government has been promoting policies to install Low Impact Development (LID) facilities such as permeable pavements or grass blocks in parking lots or pavements. However, transition of asphalt-paved surfaces to permeable pavement generated asphalt wastes which are detrimental to the environment and has cost implications due to its removal and disposal. Therefore this study was conducted to provide a method of constructing a cost-effective permeable pavement to reduce waste generation and cost. In this study, comparative analysis of the water circulation capacity and economic efficiency of the traditional construction method and new method proposed in this study through the lab-scale experiment. The proposed method was to make holes in existing asphalt pavements, layout geotextile fabric and permeable base media such as sand before compaction. After compaction, layout grass blocks on the compacted base media then layout sand in between each grass blocks before compaction. Apparently, there was no significant difference between the traditional installation method of permeable pavement and the proposed method in this study considering surface runoff, infiltrated volume, stored volume, and rainfall-runoff delay time. The proposed method in this study generated 86% less wastes compared to the traditional installation method and has 70% cost reduction considering asphalt removal and disposal. The construction method proposed in this study yielded similar performance compared to the traditional installation method and water circulation effect, but was proven to be less complicated and economical.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.961-965
• /
• 2007

현재 오염총량관리제를 시 군 단위의 기초자치 단체별로 시행하고 있는데 실제로 오염물질의 전달은 행정구역단위가 아닌 유역내에서 이루어지진다. 따라서 본 연구에서는 기초자치 단체별이 아닌 유역단위로 오염부하량과 삭감량을 산정함으로써 유역 단위의 오염총량관리제 계획 수립을 위한 토대를 제공하고자 한다. 본 연구에서는 보청천 유역을 대상으로 유역의 오염부하량을 산정하고자 하였다. 이를 위하여 지리정보시스템(GIS)인 WMS(Watershed Management System)와 ArcView를 이용하여 유역의 지형인자들을 추출하고, 각 소하천의 토지이용도와 생활계, 축산계, 양식계, 토지계를 바탕으로 원단위를 적용하여 발생부하량을 산정하였다. 그리고 각 소하천별 발생부하량 산정 결과를 토대로 각 수질관측점을 기준으로 하여 배출부하량을 산정하였으며, 배출부하량의 산정결과를 이용하여 유달부하량을 산정하였다. 이를 위해서 필요한 수질 데이터는 QUAL2E 모형을 이용하여 모의 하였으며, 수리 및 수질 매개변수를 추정하고 모형의 보정 및 검증을 수행하였다. 그 결과 유달부하량은 BOD는 2013.16kg/일, TN은 1091.34kg/일, TP은 235.16kg/일이 도출되었다. 따라서 장래에 수질이 악화될 경우를 고려하여 수질 항목별 오염량이 2배, 3배로 증가한다고 가정하였다. 오염량이 2배 증가하였을 경우, 오염부하량을 산정한 결과 보청천3 지점에서 BOD는 184.68kg/일이 삭감되어야 하고, 오염량이 3배 증가하였을 경우 BOD는 1775.69kg/일이 삭감되어야 한다는 결과를 도출할 수 있었다. 본 연구와 같이 유역단위로 오염부하량을 산정할 경우, 오염원을 줄이는데 효율적일 것으로 생각되며, 향후 오염총량관리제를 위해 유역단위의 오염부하량 산정을 고려하면 좋을 것으로 사료된다.는 지배적인 요인으로 남게 될 것이다. 본 연구에서는 현재 진행중인 승기천 오염하천 정화사업이 종료되는 시점을 기준으로 남동유수지에 대해 승기천과 연계한 유수지의 환경개선 방법을 제안하였다. 준설을 통해 유수지의 근본적인 오염원을 제거하고 남동유수지 유입부에 인공습지와 수처리설비를 설치하여 유수지의 수질을 개선하고 개선된 수질이 3급수로 유지하도록 하였으며, 설치된 인공습지에는 철새도래지를 조성하여 유수지 유입수인 철새가 날아드는 하천인 승기천의 테마와 연계하도록 하였다. 인공습지 주변으로 식생호안을 설치하고 유수지 주변에는 산책로를 설치하여 지역주민들의 친환경 수변공간으로 활용하도록 하였다. 1유수지와 연결된 2유수지는 BTL사업을 통해 주변공단으로부터의 오폐수를 원천적으로 차단하도록 하였으며 2유수지를 매립하여 지하는 강우시 유출수 저류가 가능한 화물차주차장으로 활용하고 지상은 녹지공간으로 조성하여 공단근로자 및 지역주민을 위한 휴식공간으로 활용될 수 있도록 제안하였다. 본 연구는 남동유수지 환경 개선 사업 실행을 위한 정책 연구로 연구결과를 인천시가 적극 수용하기로 결정함에 따라 인천시의 환경 현안 문제인 남동유수지의 수질개선을 통해 시민의 휴식 및 여가선용 공간으로 활용하기 위한 사업의 기초자료로 활용되며 이미 설계검토가 시작되었다. 본 연구결과는 유수지 및 저수지의 환경개선 사업의 선두적인 성공사례로 국내 타 지역의 유사한 사업에 있어 벤치마킹을 할 수 있는 훌륭한 사례가 될 것이다.요 생산이 증가하자 군신의 변별(辨別)과 사치를 이유로 강력하게 규제하여 백자의 확대와 발전에 걸림돌이 되었다. 둘째, 동기(銅器)의 대체품으로 자기를 만들어 충당해야할 강제성 당위성 상실로 인한 자기수요 감소를 초래하였을 것으로 사료된다. 셋째, 경기도 광주에서 백자관요가 운영되었으므로 지방인 상주

• Journal of Korea Spatial Information System Society
• /
• v.8 no.1 s.16
• /
• pp.1-16
• /
• 2006

Recently, human based computing environment for supporting users to concentrate only user task without sensing other changes from users is being progressively researched and developed. But middleware deletes steream data processed for reducing process load of massive information from RFID sensor in this computing. So, this kind of middleware have problems when user demands probability or statistics needed for data warehousing or data mining and when user demands very important stream data repeatedly but already discarded in the middleware every former time. In this paper, we designs Sensor Middleware Architecture on Multi Level Spatial DBMS with Snapshot and manage repeatedly required stream datas to solve reusing problems of historical stream data in current middleware. This system uses disk databse that manages historical stream datas filtered in middleware for requiring services using historical stream information as data mining or data warehousing from user, and uses memory database that mamages highly reuseable data as a snapshot when stream data storaged in disk database has high reuse frequency from user. For the more, this system processes memory database management policy in a cycle to maintain high reusement and rapid service for users. Our paper system solves problems of repeated requirement of stream datas, or a policy decision service using historical stream data of current middleware. Also offers variant and rapid data services maintaining high data reusement of main memory snapshot datas.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2005.10a
• /
• pp.490-495
• /
• 2005

Organic compost has been widely applied to the cropland because it has been thought as Environmentally Sound Agriculture (ESA) in Korea. However, many field researches have been done to investigate water quality impacts of organic compost uses, compared to those from chemical fertilizer applications. It was found that pollutant loads from organic compost applied croplands were higher than those from chemical fertilizer applied areas. However, there might be other unknown factors affecting the results since the experiments were performed at the outside fields. In this study, indoor rainfall experiments using the Norton rainfall simulator systems were done to minimize and exclude errors from unknown sources by controlling soil characteristics, rainfall amount, rainfall intensity, and fertilizer treatments. The amounts of surface runoff and groundwater percolated from 10% and 20% slope plots were measured and water quality samples were collected and analyzed for BOD, COD, and T-P. Flow weighted mean concentration (FWMC) values were computed to assess effects of different fertilizer treatments. It was found that average concentration values of BOD were 5.57 mg/L from chemical fertilizer treated plot and 8.08 mg/L from organic compost treated plots. For 10% slope, FWMC BOD values from organic compost treated plots were higher by 29.9% than those from chemical fertilizer treated plots. For 20% slope, FWMC BOD values from organic plots were higher by 38.8% than those from chemical fertilizer plots. FWMC BOD values for 20% slope plots were higher than those from those for 10% slope plots. The similar trends were found for COD and T-P. In Korea, excessive use of organic compost has caused extremely high levels of organic matter contents at the cropland. Organic compost are usually applied to the cropland to improve soil quality, while chemical fertilizer is applied to help crop growth. Since organic compost is very slow in releasing its nutrients to the soil, farmers usually apply excessive organic compost for immediate effects and maximum crop yields, which has been causing soil and water quality degradations. Therefore, thorough investigations for better nutrient management plans are needed to develop the ESA strategy in Korea.

• Journal of Fashion Business
• /
• v.3 no.4
• /
• pp.83-91
• /
• 1999

The purpose of this study is to provide some useful references to the educational field in terms of providing on analysis of job characteristics of fashion designers working in the women's wear industries. The data were collected from 102 fashion designers working in women's wear industries through the questionnaire and were analyzed by SPSS packages of frequencies and percentiles for comparative study, and the results are as follows: 1. The demographic characteristics of the fashion designers are; unmarried (80.4%), working less than 2 years (20.2%), completion of junior college(68.6%), majority ages between 20-24 yrs(43.1%). An average length of working in one company war less than 6 months. 2. The ratio computer usage of the design room was approx. 52.0% especially in the management of sales (52.9%) and the ratio in fashion design was approx. 17.6% in merchandising planning. 3. 76.4% of respondents was working 10 hours a day, and 50% of them was dissatisfied on the job caused by excessive working hour (31.4%) and job over load (35.3%). In the developing fashion design with the relation of actual job, insufficient knowledges of the concerned technical and production fields (68.6%) were indicated as the most difficult area. In addition, fashion magazines were considered as the most helpful resource(94.1%). 4. It was noted that the target age groups for the brand were clearly divided into two groups, notably the early and middle of twenties and the early and middle forties. Among the produced items, formal wears were accounted for 52.9%. 5. As far as the contents of job are concerned, the fashion designers are mostly engaged in purchasing textile, collecting informations of fashion, quality control, whereas their actual job is apparel design. 6. The training that the fashion designer received beside formal education includes attendance of private institutes(62.7%), OJT(7.8%), seminars(4.9%). Regarding formal education, the respond indicated that they had least opportunity to received computer training. 7. The necessary subjects in the schools for the fashion designers in relation to the current job were fashion information, merchandising planning, pattern making, cutting, fashion marketing, knowledges of clothing material in sequence. Subjects which are necessary for the further development include pattern making(21.6%), fashion marketing(14.7%), and designing with computer(7.8%).

• Journal of Digital Convergence
• /
• v.14 no.2
• /
• pp.183-190
• /
• 2016

This paper proposes algorithm to reduce the computing time in a neural network that reduces transmission of data for tracking mobile objects in surveillance networks in terms of detection and communication load. Object Detection can be defined as follows : Given image sequence, which can forom a digitalized image, the goal of object detection is to determine whether or not there is any object in the image, and if present, returns its location, direction, size, and so on. But object in an given image is considerably difficult because location, size, light conditions, obstacle and so on change the overall appearance of objects, thereby making it difficult to detect them rapidly and exactly. Therefore, this paper proposes fast and exact object detection which overcomes some restrictions by using neural network. Proposed system can be object detection irrelevant to obstacle, background and pose rapidly. And neural network calculation time is decreased by reducing input vector size of neural network. Principle Component Analysis can reduce the dimension of data. In the video input in real time from a CCTV was experimented and in case of color segment, the result shows different success rate depending on camera settings. Experimental results show proposed method attains 30% higher recognition performance than the conventional method.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.6
• /
• pp.60-71
• /
• 2014

Cable-stayed bridge, which is one of the representative long-spanned bridge, needs prompt maintenances when a stay cable is damaged because it may cause structural failure of the entire bridge. Many researches are being conducted to develop abnormal behavior detection algorithms for the purpose of shortening the reaction time after the occurrence of structural damage. To improve the accuracy of the damage detection algorithm, ample observation data from various kinds of damage responses is needed. However, it is difficult to measure an abnormal response by damaging an existing bridge, numerical simulation can be an effective alternative. In most previous studies, which simulate the damage responses of a cable-stayed bridge, the damages has been considered as a load variation without regard to its stiffness variation. The analyses of using these simplification could not calculate exact responses of damaged structure, though it may reserve a sufficient accuracy for the purpose of bridge design. This study suggests Gradual Bilinear Method (GBM) which simulate the damage responses of cable-stayed bridge considering the stiffness and mass variation, and develops an analysis program. The developed program is verified from the responses of a simple model. The responses of a existing cable-stayed bridge model are analyzed with respect to the fracture delay time and damage ratio. The results of this study can be used to develop and verify the highly accurate abnormal behavior detection algorithm for safety management of architecture/large structures.

• The KIPS Transactions:PartB
• /
• v.15B no.6
• /
• pp.575-584
• /
• 2008

According to the network condition, the communication network overload could be occurred when media transmitting. Many researches are being carried out to lessen the network overload, such as the filtering, load distributing, frame dropping and many other methods. Among these methods, one of effective method is frame dropping that reduces specified video frames for bandwidth diminution. B frames are dropped and then I, P frames are dropped according to dependency among the frames in frame dropping. This paper proposes a scheme for protecting copyrights by encryption, when we apply frame dropping to reduce bandwidth of media following MPEG-4 file format. We designed two kinds of frame dropping: first one stores and then sends the dropped files and the other drops frames in real-time when transmitting. We designed three kinds of encryption methods in which DES algorithm is used to encrypt MPEG-4 data: macro block encryption in I-VOP, macro block and motion vector encryption in P-VOP, and macro block and motion vector encryption in I, P-VOP. Based on these three methods, we implemented a digital right management solution for MPEG-4 data streaming. We compared the results of dropping, encryption, decryption and quality of video sequences to select an optimal method, and there is no noticeable difference between the video sequences recovered after frame dropping and the ones recovered without frame dropping. The best performance in encryption and decryption of frames was obtained when we apply the macro block and motion vector encryption in I, P-VOP.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.2
• /
• pp.145-151
• /
• 2008

The research so far has primarily analyzed efficiency improvement but in this research, it analyzes the characteristics of earthquake behavior, with changed pier heights, through ordinary and seismic analysis. For this, the kind of bridge bearing has been changed against PSC I-shaped bridge, which is mostly used in practice, and at all times earthquake analysis has been performed with through height of pier. Especially considering sectional power resulting from earthquake analysis, displacement of PSC I-shaped bridge bearing, diameter of pier pillar by earthquake load, and upper spare gap have been analyzed. In case of high-pear, seismic isolated device is decided as proper for cars' driving and for management of bridge since it decreases movement of upper structure, than elastic bearing, reducing size of elastic connect device, and it's been analyzed it is effective for improvement of fine view and economic efficiency reducing section of lower bridge structure. Finally, when design PSC I-shaped bridge bearing, for the proper structure and high-pier side, applying seismic isolated device through precise inner analysis is proper than applying equal elastic bearing.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1253-1257
• /
• 2010

강원도 홍천군 내면에 위치한 비점오염 관리지역의 강우시 유출 특성을 파악하고, 비교하기위해 연구를 수행하였다. 2009년 6월부터 2009년 11월까지의 연구기간 중 강우량이 비교적 많은 7회의 강우사상에 대하여 단위면적당 유출량, 유량가중평균농도, 단위면적당 오염부하를 비교하며, 분석하였다. 강우사상별 단위면적당 총 유출량은 저감시설의 설치 유 무에 따라 명확한 경향이 나타나지 않았다. 자운천 유역의 SS, TP의 유량 가중평균농도는 각각 4.0~1440.4 mg/L와 0.024~0.267 mg/L의 범위로 나타났으며, 덕두원 유역의 SS, TP의 유량가중평균농도는 각각 6.2~1001.1 mg/L, 0.039~0.226 mg/L의 범위로 나타났다. 지령골 유역의 SS, TP의 유량가중평균농도는 각각 3.4~1050.6 mg/L, 0.08~0.342 mg/L의 범위로 조사되었다. 10차, 11차, 12차, 26차의 SS 항목에서는 비점오염 저감시설이 설치된 자운천과 덕두원 유역에 비해 다소 높은 것으로 나타났으며, TP는 대부분의 강우사상에서 지령골의 유량가중평균농도가 높았다. 자운천의 강우사상에 따른 SS의 단위면적당 오염부하는 0.24~1,397.85 kg/ha의 범위로 나타났으며, 덕두원과 지령골에서 산정된 SS의 단위면적당 오염부하는 각각 0.06~1,236.78 kg/ha와 0.29~894.81 kg/ha로서 8차와 9차 강우사상을 제외한 나머지 강우사상에서는 비점오염 저감시설이 설치되지 않은 지령골에서 더 많은 양이 발생하였다. TP의 경우 자운천과 덕두원 유역의 단위면적당 TP 오염부하는 각각 0.0006~0.33 kg/ha와 0.0005~0.21 kg/ha의 범위로 나타났으며, 지령골 유역의 강우사상에 따른 단위면적당 오염부하는 0.003~0.29 kg/ha의 범위로서 저감시설이 설치된 자운천과 덕두원 유역보다 높게 나타났다. 단위면적당 오염부하에 기초할 때, 비점오염 저감시설이 설치된 소유역에서 SS와 TP 항목에 대한 저감효과가 나타났다. 하지만 짧은 모니터링 기간과 자료의 부족으로 인해 비교 및 분석의 한계가 있다고 판단된다. 본 연구는 지속적인 모니터링으로 더 많은 자료가 확보될 때 비점오염 저감사업의 효과를 극대화시킬 수 있는 방안을 제시 할 수 있을 것으로 사료된다.