• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4B
• /
• pp.604-612
• /
• 2000

In order to satisfy the desired QoS level associated with each existing connection, ATM networks require traffic policing during a connection. Users who respect the contract should receive the function of transparent traffic policing without any interruption. However, contract violations should be detected and mediated immediately. So we propose a CAM type policing controller to allow user cell streams to minimize additional delay. The proposed policing scheme controls policing actions including traffic shaping by suitably spacing cells on each virtual circuit. This policing action is based on parallel processing of multiple cell stream which arrive in ATM multiplexed virtual circuits. We have developed an analytical model of the proposed policing scheme to examine the amount of cell loss and delay, which depends on traffic load, the size of policing buffers and minimum spacing cell time.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.7
• /
• pp.328-336
• /
• 2005

Power quality has become concern both utilities and their customers with wide spread use of electronic and power electronic equipment. The poor quality of electric power causes malfunctions, instabilities and shorter lifetime of the load. In power system operation, power system disturbances such as faults, overvoltage, capacitor switching transients, harmonic distortion and impulses affects power quality. For diagnosing power quality problem, the causes of the disturbances should be understood before appropriate actions can be taken. In this paper we present a new approach to detect, localize, and investigate the feasibility of classifying various types of power quality disturbances. This paper deals with the use of a multi-resolution analysis by a discrete wavelet transform to detect power system disturbances such as interruption, sag, swell, transients, etc. We also proposed do-noising and threshold technique to detect power system disturbances in a noisy environment. To find the better mother wavelet for detecting disturbances, we compared the performance of the disturbance detection with the several mother wavelets such as Daubechies, Symlets, Coiflets and Biorthogonals wavelets. In our analysis, we adopt db4 wavelet as mother wavelet because it shows better results for detecting several disturbances than other mother wavelets. To show the effectiveness of the proposed method, a various case studies are simulated for the example system which is constructed by using PSCAD/EMTDC. From the simulation results. proposed method detects time Points of the start and end time of the disturbances.

• The KIPS Transactions:PartA
• /
• v.14A no.7
• /
• pp.421-434
• /
• 2007

Among many other CG generated natural scenes, the representation of ocean surfaces is one of the most complicated and time-consuming problem because of its large extent and complex surface movement. We present a hybrid method to represent and animate unbound deep-water ocean surfaces by utilizing graphics processor as both simulation and rendering core. Our technique is mainly based on spectral approaches that generate a high-detailed height field using Fourier transform on a 2D regular grid. Additionally, we incorporate Gerstner model and generate low-detailed height field on a 2D projected grid in order to represent large waves and main structure of ocean surface. There is no interruption between CPU and GPU, and no need to transfer simulation results from the system memory to graphics hardware because the entire simulation and rending processes are done on graphics processor. As a result we can synthesize and render realistic water surfaces in real-time. Proposed techniques are readily adoptable to real-time applications such as computer games that have heavy work load on CPU but still demand plausible natural scenes.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.5
• /
• pp.707-713
• /
• 2013

Coupling bolts have replaced conventional fitted bolts in applications where the operator's safety during assembly/disassembly is of concern or where the cost of process interruption is significant. Coupling bolts have been installed on rotating flange couplings in a wide range of marine and power applications worldwide. Their use has been approved by all leading international and national classification societies and regulatory bodies. A coupling bolt is a hydraulically tensioned fitted bolt that creates a stable and rigid link between coupling flanges and simplifies assembly and disassembly. We measure the bolt dimensions for reverse engineering and study the standard of assembly-load using a mechanical formula in order to localize a coupling bolt for a shaft in a power plant. We experimentally obtain the friction coefficient and confirm the condition of bolt sets through structure analysis. We show the variation of contact pressure for the shape parameter in order to consider the result when redesigning a bolt.

• Journal of Korean Clinical Nursing Research
• /
• v.19 no.2
• /
• pp.181-194
• /
• 2013

Purpose: Examining current status of nursing intershift handover practice would provide opportunity to identify areas in need of improvement. The aim of this study was to describe nursing intershift handover practice in Korean hospitals. Methods: A cross-sectional survey using questionnaire was used to collect data. A total of 788 nurses working in general hospitals had participated. Results: More than half of the nurses participated responded that they used kardex for verbal handover (51.8%). The average time took for handover was 40.2 minutes (SD=14.7). Only 5.8% of nurses were satisfied with intershift handover practice. 72.9% of respondents did not have manuals for handover and 86% of nurses considered intershift handover manuals were necessary. Most nurses considered intershift handover pratice as an important component for patient safety (99.2%). The causes of handover error were interruption during handover, high work load, and stress/fatigue of nurses. Conclusion: The findings of this study indicated a need to develop handover practice guidelines which outline pertinent details. Intershift handover practice guidelines could provide consistency and structure to the information that is handed over.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.185-191
• /
• 2018

This study examined the type and extent of interruption between induced emotion and succeeding arithmetic operation. The experiment was carried out to determine the influence of the induced emotions (anger, joy, and sorrow) and stimulus types (picture and sentence) on the cognitive process load that may block the interactions among the constituents of working memory. The study subjects were 32 undergraduates who were similar with respect to age and education parameters and were especially instructed to attend to induced emotion by imitation of facial expression and to make a correct decision during the remainder calculation task. In the results, the stimulus types did not exhibit any difference but there was a significant difference among the induced emotion types. The difference was observed in slower response time at positive emotion(joy condition) as compared with other emotions(anger and sorrow). More specifically, error and delayed correct response rate for emotion types were analysed to determine which phase the slower response was associated with. Delayed responses of the joy condition by sentence-inducing stimulus were identified with the error rate difference, and those by picture-inducing stimulus with the delayed correct response rate. These findings not only suggest that induced positive emotion increased response time compared to negative emotions, but also imply that picture-inducing stimulus easily affords arithmetic fluctuation whereas sentence-inducing stimulus results in arithmetic failure.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.4
• /
• pp.94-103
• /
• 2016

For elevated railway station on which track is connected with superstructure of station, structural vibration level and structure-borne-noise level has exceeded the reference level due to structural characteristics which transmits vibration directly. Therefore, existing elevated railway station is in need of economical and effective vibration reduction method which enable train service without interruption. In this study, structural vibration non-transmissible system which is applied to vibroisolating material for column member is developed to reduce vibration. That system is cut covering material of the column section using water-jet method and is installed with vibroisolating material on cut section. To verify vibration reduction effect and structural performance for structural vibration non-transmissible system, impact hammer test and cyclic lateral load test are performed for 1/4 scale test specimens. It is observed that natural period which means vibration response characteristics is shifted, and damping ratio is increased about 15~30% which means that system is effective to reduce structural vibration through vibration test. Also load-displacement relation and stiffness change rate of the columns are examined, and it is shown that ductility and energy dissipation capacity is increased. From test results, it is found that vibration non-transmissible system which is applied to column member enable to maintains structural function.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.8
• /
• pp.1802-1809
• /
• 2009

Abstract The typical distribution systems have the power flow from distribution substations (sources) to customers (load) only as one direction. However, in the case where distributed generations (DG) such as PV system and wind power systems are connected to distribution systems, the DG output variations to distribution systems, so called reverse power flow, may cause the bi-directional power flow. So, the reverse power flow has severe impacts on typical power system, for example power quality problems, protection coordination problems, and so on. Especially, protection devices (sectionalizer) in primary feeder of distribution system interconnected with distributed generations may cause problems of malfunction, and then many customers could have problems like an interruption. So, this paper presents the bi-directional operation algorithm of protection devices to overcome the problems like mal-function. And, also this paper shows the effectiveness of proposed method by using both PSCAD/EMTDC software and test facility of protection devices to simulate the field distribution systems.