• 제목/요약/키워드: Load Sharing Algorithm

검색결과 67건 처리시간 0.022초

연속주조기에서 스트랜드 구동롤의 인발력 분배 제어 (Load Sharing Control of Driven Roll in Continuous Caster)

  • 천창근;김철우
    • 전력전자학회논문지
    • /
    • 제8권4호
    • /
    • pp.321-327
    • /
    • 2003
  • 연속주조 프로세스는 고온의 액체 용강을 고체 금속으로 만드는 프로세스로서, 스트랜드 구동롤의 역할은 운전자가 설정한 주조 속도 제어 패턴에 따라 정확하게 주편을 인발하는 것이다. 기존의 스트랜드 구동롤의 제어는 주조 속도만을 제어하였으나 전동기 드라이버 세팅의 부정확성 및 변동, 연속적인 주조에 의한 구동롤의 마모 및 변형에 의한 롤 직경의 변경, 주조 중 주편 벌징량의 변동 등의 요인에 의해 주조 중 주편을 인발하는 데 소요되는 전체 인발력이 각 구동롤에 적절하게 분배되지 않아 주편 코너부에 수평 크랙을 발생시켜 주조 속도를 증가하는데 있어서 결정적인 장애요인이었다. 본 논문에서는 스트랜드 구동롤에 인가되는 인발력 분포와 주편 품질과의 상관 관계를 도출하고 주조 중에 연속적으로 인발력을 분배할 수 있는 알고리즘을 제안하였다. 제안한 인발력 분배 알고리즘은 각 구동롤 전동기의 절대적인 토크를 제어하는 것이 아니라, 상위제어기에서 결정한 인발력 분배 비율에 따라 각 구동롤 전동기의 토크분 전류를 상호 비교하여 속도 설정치를 조정함으로써 이루어진다. 그리고 인발력 분배 알고리즘의 동작 확인을 위해 광양제척소 1연주공장 4연주기에 적용하여 양호한 결과를 확인하였다.

연속주조기에서 Driven Roll Motor의 Load Sharing 제어 (Load Sharing Control of Driven Roll in Continuous Caster)

  • 천창근;신건;김철우
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2002년도 전력전자학술대회 논문집
    • /
    • pp.715-718
    • /
    • 2002
  • As the modern technology of continuous casting plant is focused on improvement of slab quality, the control system of strand driven roll which has positive effect is investigated in this paper. An irregular distribution of withdrawal force gives rise to horizontal crack in high and middle grade carbon steel. Based on the basic understanding on design concept of high technology company, monitoring the withdrawal force distribution of strand driven roll and analysis of the control system was Performed at continuous casters of POSCO. The control algorithm of withdrawal force distribution for A.C motor vector control, which was derived from above study and had been applied for POSCO Kwangyang 1-4 continuous casting plant, is presented.

  • PDF

분산시스템에서 상태 정보 추론을 이용한 그룹 부하 균등 알고리즘 (Croup Load Balancing Algorithm Using State Information Inference in Distributed System)

  • 정진섭;이재완
    • 한국정보통신학회논문지
    • /
    • 제6권8호
    • /
    • pp.1259-1268
    • /
    • 2002
  • 분산 시스템에서 전체 시스템의 부하 균형을 이루어 시스템의 성능을 향상시키는 것이 주요 목표 중 하나이다. 시스템간의 부하를 균등하게 함으로써 처리기의 가동률을 높이고 작업 반환 시간도 줄일 수 있다. 본 논문은 지식 기반 메카니즘을 이용하여 각 노드에서 과거 및 현재의 정보를 기반으로 추론한 미래 부하상태 정보를 서로 공유하여 최적의 부하 균등화를 이루는 의사 결정 규칙과 정보 교환 규칙을 설계하였다. 성능 평가 결과 각 노드의 가동률이 균등해지고 처리 속도의 향상을 보였으며, 시스템의 신뢰성과 가용성이 향상되었다. 본 논문에서 제안한 기법은 분산 운영 체제의 부하 조절 알고리즘 설계에 활용될 수 있다.

Performance Analysis of Dynamic Spectrum Allocation in Heterogeneous Wireless Networks

  • Ha, Jeoung-Lak;Kim, Jin-Up;Kim, Sang-Ha
    • ETRI Journal
    • /
    • 제32권2호
    • /
    • pp.292-301
    • /
    • 2010
  • Increasing convergence among heterogeneous radio networks is expected to be a key feature of future ubiquitous services. The convergence of radio networks in combination with dynamic spectrum allocation (DSA) could be a beneficial means to solve the growing demand for radio spectrum. DSA might enhance the spectrum utilization of involved radio networks to comply with user requirements for high-quality multimedia services. This paper proposes a simple spectrum allocation algorithm and presents an analytical model of dynamic spectrum resource allocation between two networks using a 4-D Markov chain. We argue that there may exist a break-even point for choosing whether or not to adopt DSA in a system. We point out certain circumstances where DSA is not a viable alternative. We also discuss the performance of DSA against the degree of resource sharing using the proposed analytical model and simulations. The presented analytical model is not restricted to DSA, and can be applied to a general resource sharing study.

A Simplified Control Algorithm for Three-Phase, Four-Wire Unified Power Quality Conditioner

  • Singh, Bhim;Venkateswarlu, P.
    • Journal of Power Electronics
    • /
    • 제10권1호
    • /
    • pp.91-96
    • /
    • 2010
  • In this paper, a simplified control algorithm for a three-phase, four-wire unified power quality conditioner (UPQC) is presented to compensate for supply voltage distortions/unbalance, supply current harmonics, the supply neutral current, the reactive power and the load unbalance as well as to maintain zero voltage regulation (ZVR) at the point of common coupling (PCC). The UPQC is realized by the integration of series and shunt active filters (AFs) sharing a common dc bus capacitor. The shunt AF is realized using a three-phase, four leg voltage source inverter (VSI) and the series AF is realized using a three-phase, three leg VSI. A dynamic model of the UPQC is developed in the MATLAB/SIMULINK environment and the simulation results demonstrating the power quality improvement in the system are presented for different supply and load conditions.

An Efficient Load Balancing Mechanism in Distributed Virtual Environments

  • Jang, Su-Min;Yoo, Jae-Soo
    • ETRI Journal
    • /
    • 제30권4호
    • /
    • pp.618-620
    • /
    • 2008
  • A distributed virtual environment (DVE) allows multiple geographically distributed objects to interact concurrently in a shared virtual space. Most DVE applications use a non-replicated server architecture, which dynamically partitions a virtual space. An important issue in this system is effective scalability as the number of users increases. However, it is hard to provide suitable load balancing because of the unpredictable movements of users and hot-spot locations. Therefore, we propose a mechanism for sharing roles and separating service regions. The proposed mechanism reduces unnecessary partitions of short duration and supports efficient load balancing.

  • PDF

Modeling and Control Method for High-power Electromagnetic Transmitter Power Supplies

  • Yu, Fei;Zhang, Yi-Ming
    • Journal of Power Electronics
    • /
    • 제13권4호
    • /
    • pp.679-691
    • /
    • 2013
  • High-power electromagnetic transmitter power supplies are an important part of deep geophysical exploration equipment. This is especially true in complex environments, where the ability to produce a highly accurate and stable output and safety through redundancy have become the key issues in the design of high-power electromagnetic transmitter power supplies. To solve these issues, a high-frequency switching power cascade based emission power supply is designed. By combining the circuit averaged model and the equivalent controlled source method, a modular mathematical model is established with the on-state loss and transformer induction loss being taken into account. A triple-loop control including an inner current loop, an outer voltage loop and a load current forward feedback, and a digitalized voltage/current sharing control method are proposed for the realization of the rapid, stable and highly accurate output of the system. By using a new algorithm referred to as GAPSO, which integrates a genetic algorithm and a particle swarm algorithm, the parameters of the controller are tuned. A multi-module cascade helps to achieve system redundancy. A simulation analysis of the open-loop system proves the accuracy of the established system and provides a better reflection of the characteristics of the power supply. A parameter tuning simulation proves the effectiveness of the GAPSO algorithm. A closed-loop simulation of the system and field geological exploration experiments demonstrate the effectiveness of the control method. This ensures both the system's excellent stability and the output's accuracy. It also ensures the accuracy of the established mathematical model as well as its ability to meet the requirements of practical field deep exploration.

독립제어구조를 갖는 N+1 모듈형 UPS 시스템의 병렬운전 (Wireless Parallel Operation Control of N+1 Redundant UPS System)

  • 조준석;한재원;최규하
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2002년도 전력전자학술대회 논문집
    • /
    • pp.734-738
    • /
    • 2002
  • In this paper, a novel wireless parallel operation algorithm of N+1 redundant UPS system with no control interconnections is presented. The load sharing of multiple UPS modules are controlled by Q-V droop and $P-\delta$ droop algorithm. This algorithm compensates for inverter parameter variation and line impedance imbalances with wireless auto-tuning method. And to increase the reliability of transient characteristic under parallel operation, a virtual injected Impedance is proposed to decrease a circulation current between inverter modules. Simulation results are provided to prove the novel wireless algorithm.

  • PDF

ELiSyR: Efficient, Lightweight and Sybil-Resilient File Search in P2P Networks

  • Kim, Hyeong-S.;Jung, Eun-Jin;Yeom, Heon-Y.
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제4권6호
    • /
    • pp.1311-1326
    • /
    • 2010
  • Peer-to-peer (P2P) networks consume the most bandwidth in the current Internet and file sharing accounts for the majority of the P2P traffic. Thus it is important for a P2P file sharing application to be efficient in bandwidth consumption. Bandwidth consumption as much as downloaded file sizes is inevitable, but those in file search and bad downloads, e.g. wrong, corrupted, or malicious file downloads, are overheads. In this paper, we target to reduce these overheads even in the presence of high volume of malicious users and their bad files. Sybil attacks are the example of such hostile environment. Sybil attacker creates a large number of identities (Sybil nodes) and unfairly influences the system. When a large portion of the system is subverted, either in terms of the number of users or the number of files shared in the system, the overheads due to the bad downloads rapidly increase. We propose ELiSyR, a file search protocol that can tolerate such a hostile environment. ELiSyR uses social networks for P2P file search and finds benign files in 71% of searches even when more than half of the users are malicious. Furthermore, ELiSyR provides similar success with less bandwidth than other general efforts against Sybil attacks. We compare our algorithm to SybilGuard, SybilLimit and EigenTrust in terms of bandwidth consumption and the likelihood of bad downloads. Our algorithm shows lower bandwidth consumption, similar chances of bad downloads and fairer distribution of computation loads than these general efforts. In return, our algorithm takes more rounds of search than them. However the time required for search is usually much less than the time required for downloads, so the delay in search is justifiable compared to the cost of bad downloads and subsequent re-search and downloads.

종속을 고려한 Network동적 신뢰도 분석 시스템 (Reliability Analysis system For Network with Dependent Components)

  • 윤원영;하영주
    • 산업공학
    • /
    • 제10권2호
    • /
    • pp.41-50
    • /
    • 1997
  • This paper considers the reliability computation of the network with dependent components and a software system is developed for supporting the reliability analysis and improvement of the system reliability. At first, We propose the common cause failure and load sharing models as the typical models considering the dynamic behaviors of networks with dependent components. Secondly, the algorithm is proposed to obtain the network reliability and reliability importance of component. The software, Delphi, is used to develop the our reliability analysis system.

  • PDF