• 제어로봇시스템학회논문지
• /
• 제22권12호
• /
• pp.991-994
• /
• 2016

This paper presents a load management method based on OpenADR of smart grid. Previous demand side algorithm is restricted on reducing peak power. But, in this paper we suggest a method of performing the energy-saving control according to the power price utilizing building automatic control system installed on the customer side in the case of hourly differential pricing signal is transmitted to the open automated demand response system. And, we showed the integrated demand management software for 3 buildings.

• 대한기계학회논문집
• /
• 제18권1호
• /
• pp.232-239
• /
• 1994

This paper presents an effective way of improving fuel consumption for a variable displacement engine. The improvement of fuel consumption can be accomplished by means of deactivating inlet and exhaust valves, reducing the number of effective cylinders of a four-cylinder gasoline engine that is mounted on a domestic compact automobile.

• 한국통신학회논문지
• /
• 제33권7A호
• /
• pp.757-767
• /
• 2008

차세대 이동 통신망의 발전으로 상용 망과 이 기종 망이 서로 겹쳐진 다중 망 구조가 형성될 것이다. 이러한 여러 망이 겹쳐진 다중 망 구조에서 전체 무선자원의 사용 효율을 높이고 Eb/Io (bit energy-to-interference plus noise density ratio)를 개선하기 위해 이기종망간 혹은 동종망간 상호 연동 기술이 필요하다. 본 논문에서는 이러한 동종망과 이기종망들이 서로 겹쳐져 있는 다중 셀 환경에서 load를 효율적으로 분산시킴으로써 무선 자원의 효율을 높이고 신호의 간섭양을 줄여 사용자의 QoS 보장 및 성능 개선을 위한 soft load balancing algorithm을 제안 및 분석한다. 본 논문에서는 수학적 분석을 통해 효율적인 load sharing을 위한 최적의 LBR (load balancing ratio) 을 구하고 이를 이용하여 각 network에 traffic 양을 할당하여 서비스한다. 그러므로 soft load balancing 알고리듬은 보다 안정적인 데이터 전송을 가능하게 한다.

• 대한토목학회논문집
• /
• 제36권2호
• /
• pp.307-315
• /
• 2016

국내 외 기후변화 대응 체제의 강화에 따라 전 세계적으로 온실가스 감축을 위한 노력을 기울이고 있다. 건설 분야에서는 건축물을 중심으로 온실가스 저감을 위한 연구가 활발히 이루어지고 있으나, 온실가스 이외에 지구환경에 영향을 미치는 각종 오염물질을 고려한 종합적인 환경부하 저감을 위한 연구는 다소 부족하다. 이에 본 연구에서는 NATM터널을 대상으로 LCA (Life Cycle Assessment, 전과정 평가) 방법론을 이용하여 공종별 환경부하 특성을 분석하였다. 분석 결과, 라이닝콘크리트공, 숏크리트공, 갱문 및 개착터널 등 7대 공종이 NATM터널의 주요 환경부하 공종으로 나타났으며 전체 환경부하량의 89.22%를 차지하는 것으로 나타났다. 또한 대표공종들의 연장(m)당 환경부하량을 산정하여 비교 분석한 결과 개착구간에 해당하는 갱문 및 개착터널 공종의 환경부하량이 가장 큰 것으로 나타났으며, 전체 터널 구간을 대상으로 할 경우 라이닝콘크리트공과 숏크리트공에서 환경부하량이 많이 발생하는 것으로 분석되었다. 본 연구의 결과는 설계초기단계에서 환경부하 대표공종의 물량을 개략적으로 산출하여 전체 환경부하량을 추정하는 모델 개발 시 활용할 수 있을 것으로 판단되며, 향후 친환경 SOC건설을 위한 환경부하 관리방안을 수립하는데 큰 역할을 할 것으로 기대된다.

• 한국위성정보통신학회논문지
• /
• 제10권4호
• /
• pp.113-116
• /
• 2015

건물 외부에 설치된 각종 기상 측정센서에서 전송된 현재의 외부 기상조건과 일자별, 특수일별 건물 에너지 사용량과의 관계를 인공지능기법으로 분석하고 학습을 통한 예측기능을 갖도록 함으로써, 일자별, 특수일별, 계절별 그리고 기상조건에 따른 익일 전력 사용량을 예측하고 이에 따른 부하의 On/Off 우선순위를 결정하는 기능을 갖는 지능형 직접부하제어 시스템 구조를 설계한다.

• 전기학회논문지
• /
• 제65권3호
• /
• pp.404-410
• /
• 2016

This paper proposed a program of an energy storage system(ESS) for peak shaving of high-speed railway substations The peak shaving saves cost of equipment and demand cost of the substation. To reduce the peak load, it is very important to know when the peak load appears. The past data based load profile forecasting method is easy and applicable to customers which have relatively fixed load profiles. And an optimal scheduling method of the ESS is helpful in reducing the electricity tariff and shaving the peak load efficiently. Based on these techniques, MS. NET based peak shaving program is developed. In case study, a specific daily load profile of the local substation was applied and simulated to verify performance of the proposed program.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1605-1608
• /
• 2005

This study was carried out to analyze the effect of machinery house location on the stability of high efficiency gantry crane which can improve the productivity of the container transportation wok by reducing cycle time. The wind load was evaluated according to 'Load Criteria of Building Structures' enacted by the ministry of construction & transportation. The uplift forces of high efficiency gantry crane under this wind load were calculated by analyzing reaction forces at each supporting point. And variation of reaction forces at each supporting point was analyzed according to machinery house location.

• 소성∙가공
• /
• 제18권7호
• /
• pp.513-518
• /
• 2009

Large load is required in forging of large-scale components which becomes a critical restriction in practice. In the present study, two methods of incremental forging were investigated for the purpose of reducing the load required for forging of large and thick plates. The forging was applied primarily to obtain fine grains by imposing large amount of plastic deformation to the plates. One was to use nine strokes with a flat die and the other was to use three strokes with a curved die. The die moves vertically in the former while it moves vertically as well as rolls horizontally in the latter. Deformation of the slab in each case was analyzed by rigid-plastic finite element method and as a result, variations of load and slab holding force, and distributions of effective strain and thickness were predicted.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권9호
• /
• pp.1126-1130
• /
• 1999

This paper persents an algorithm compensating for the change of tension acting on a belt which is used as a force transfer media of the induction motor that drives a washing machine. The induction motor adopted in a washing machine is operated not only for the power-transmission device, but also for the detection of clothes load. The load of clothes is determined by the duration of inertial rotation which is occurred by the induction motor during a specific time. The tension of belt also affects the determination of clothes load as another load and this change of the tension is a significant disturbance for accurate determination. This paper mentions the algorithm compensating for the amount of change in tension and the application of the algotithm proved to be effectively increasing the washing performance and reducing the noise and the vibration.

• 자동차안전학회지
• /
• 제12권3호
• /
• pp.27-33
• /
• 2020

In this paper, the process of predicting efficient durability performance for vibration durability test of automobile parts using vibration test load on automobile fuel tank is presented. First of all, the common standard load that can be applied to the initial development process of the automobile was used for the fuel tank and the vulnerability of the fuel tank to the vibration fatigue load was identified through frequency response analysis. In addition, the vulnerability of the fuel tank was re-enacted through vibration durability test results, and the scale factor was applied to the standard load. In order to predict the vibration durability performance required for detailed design, vibration fatigue analysis was performed on the developed vehicle with the frequency of vibration severity equivalent to the durability test, and the vulnerability and life span of the fuel tank were identified through the process of applying weights to these selected standard loads, thereby reducing the test time of the development vehicle.