• 제목/요약/키워드: Load Composition Rate

검색결과 52건 처리시간 0.023초

Nutrient Requirements of Exercising Swamp Buffalo, Bubalus bubalis. II. Details of Work Energy of Cows and Its Relation to Heart Rate

  • Mahardika, I.G.;Sastradipradja, D.;Sutardi, T.;Sumadi, I.K.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제13권7호
    • /
    • pp.1003-1009
    • /
    • 2000
  • Four young swamp buffalo cows of similar age ranging in body weight (W) between 280 to 380 kg and trained for doing physical exercise were used in two consecutive experiments, each using a latin square design, to determine energy expenditure for draught. The experiments consisted of field trials using 4 levels of work load, i.e. no work as control and loads amounting 450 to 500 Newton (N) continuous traction for respectively 1, 2 and 3 h daily for 14 consecutive days for experiment 1, and no work, traction loads equaling 5, 10 and 15% of W for 3 h daily for 14 days for experiment 2. Heart rate during rest and exercise was monitored using PE-3000 HR monitor. Cows were fed only king grass (Penisetum purpuroides) ad libitum and were subjected to balance trials. Body composition was estimated in vivo by the body density method and daily energy expenditure (EE) was calculated from ME minus RE. RE was calculated from the changes in body-protein and -fat measured before and immediately after the 14 d experimental period assuming an energy equivalent of 39.32 MJ/kg fat and 20.07 MJ/kg protein. $E_{exercise}$ ($EE_{work}\;-\;EE_{resting}$), which was the energy spent for doing the traction during 1, 2 and 3 h was 7.13, 15.45 and 19.90 MJ, respectively. $EE_{work}$ for the 1 h treatment group was 39.75 MJ/d equivalent to 1.30 times $EE_{resting}$. The values for the 2 and 3 h treatment groups were 1.75 and 1.86 times resting energy requirement, respectively. Absolute efficiency of work in all exercise trials of experiment 2 was around 27.28%. The increases of daily $E_{exercise}$ values were correlated to elevation of heart rate (HR) according to the equation $E_{exercise}=(0.270HR^{0.363}\;-\;1)$ MJ, while draught force related to heart rate according to the equation DF (N)=6.66 HR - 361.62. Blood glucose and triglyceride levels were gradually elevated with time during the course of exercise. Mean values of blood glucose were 91.7, 115.0 and 116.2 mg/dl for cows after 1, 2 and 3 h pulling loads at 15% W respectively as compared to 88.2 mg/dl prior to work. In the same order and treatment, mean blood triglyceride concentrations were 13.5, 13.3 and 14.8 mg/dl, and 11.5 mg/dl for control. For blood lactate, the values were 1.68, 1.63 and 1.66 mM, and 0.80 mM for control. Glucose was used as the major source of energy during the initial phase of exercise, but for prolonged work, fat will replace carbohydrate as the main substrate. Accumulation of lactate persisted for some time at the end of the exercise trials.

The CO2 Reduction Potential Calculation through the Urban Park Construction

  • Lee, Eun Yeob;Kang, Myung Soo;Kim, Jong Kon
    • KIEAE Journal
    • /
    • 제14권2호
    • /
    • pp.87-98
    • /
    • 2014
  • This study is to identify quantitatively the function of carbon dioxide emissions reduction due to temperature and energy reduction according to direct carbon dioxide storage, shade provision, and evaportanspiration of urban park. According to the result of study, landscape tree indicated high carbon dioxide storage effect compare to bush, in which broadleaf tree indicated higher storage function than coniferous tree. It is believed to be the storage of carbon dioxide can be increased by increasing the composition rate of forest plants in the urban park. According to the direct estimation result of carbon dioxide storage in terms of example area, storage of carbon dioxide is estimated to be "seoul a zone" $476,818.8kg{\cdot}CO_2/m^2yr$, "anyang b zone" $186,435.7{\cdot}CO_2/m^2yr$, "daejeon c zone" $262,826{\cdot}CO_2/m^2yr$, "kwangju d zone" $231,657.8{\cdot}CO_2/m^2yr$. The carbon dioxide storage per unit area estimated to be "seoul a zone" $3.4{\cdot}CO_2/m^2yr$, "anyang b zone" $5.0{\cdot}CO_2/m^2yr$, "daejeon c zone" $2.6{\cdot}CO_2/m^2yr$, "kwangju d zone" $5.6{\cdot}CO_2/m^2yr$. The result of indirect carbon dioxide reduction effect estimated to be "seoul a zone" $291,603.4{\cdot}CO_2/m^2yr$, "anyang b zone" $165,462.4{\cdot}CO_2/m^2yr$, "daejeon c zone" $141,719.2{\cdot}CO_2/m^2yr$, "kwangju d zone" $154,803.4{\cdot}CO_2/m^2yr$. Carbon dioxide reduction potential amount through the urban park was increased to 1.6 times to 1.8 times when calculated to the indirect effect.

시화호에서 해수유입 전.후의 수환경 요인과 식물플랑크톤 동태 (Dynamics of Water Environmental Factors and Phytoplankton Before and After Inflow of Seawater in Shingwa Reservoir)

  • 신재기;김동섭;조경제
    • 한국환경과학회지
    • /
    • 제9권2호
    • /
    • pp.115-123
    • /
    • 2000
  • The dynamics of water quality and phytoplankton population had examined by monthly sampling from the upper to the lower part of watergate in an artificial Shihwa Reservoir in which situated near newly cities and incustrial complex on the west coast of Korea from January 1997 to December 1998. Among environmental factors, yearly average concentration of chl-a, TN and TP seemed to eutrophic or hypertrophic conditions that ranged 146.4~245.8 $\mu\textrm{g}$/$\ell$, 1.6~2.7 mg N/$\ell$, 258~448 $\mu\textrm{g}$ P/$\ell$, 26.9~80.7 $\mu\textrm{g}$/$\ell$, 1.0~2.4 mgN/$\ell$ and 74~239 $\mu\textrm{g}$P/$\ell$ respectively. Water quality was extremely deteriorated to consistently accumulation into inner reservoir by load of pollutants from autochthonous and allochthonous until early July 1997 after embankment. Water pollution of Shihwa Reservoir was remarkble on the biological condition with largely persistent bloom of phytoplankton and increase rate of standing crops was 2.4/yr. The development trend of phytoplankton in water ecosystem were closely related to increse and decrease of physico-chemical factors and those scale seemed to control by nutrient contents. Inflow of seawater into reservoir to object of repair of water quality. As to see dominant species, composition of those composed to mostly freshwater algae before inflow of seawater such as Selenastrum capricornutum of green algae, cyclotella atomus, C. meneghiniana of diatom and Microcystis spp. of blue-green algae and the other hand brackish algae were dominated after inflow of seawater such as Chaetoceros dicipiens, Skeletonema costatum of diatom, Dinophysis acuminata, Gymnodinium mikimotoi, G. sanguineum, Gyrodinium spirale, Prorocentrum minmum of dinoflagellate and Eutreptiella gymnastica of euglenoid. Moreover, small flagellates including Chroomonas spp. of cryptomonad were abundant throughout the year. The cause of water deterioration during fill of the freshwater were complexly supported with extra and intra parameters. The variation pattern of phytoplankton were related to water temperature and salinity by inflow of seawater based to plentiful nutrients. The dynamics of phytoplankton were assessed to ecosystem that clearly condition of dominant by unique or a few angel species seasonally.

  • PDF

알루미나-유리 복합체용 글래스의 조성에서 $CeO_2$의 함량변화가 강도에 미치는 영향 (EFFECT OF $CEO_2$ ADDITION IN GLASS COMPOSITION ON THE STRENGTH OF ALUMINA-GLASS COMPOSITES)

  • 이화진;송광엽;강정길
    • 대한치과보철학회지
    • /
    • 제38권5호
    • /
    • pp.595-605
    • /
    • 2000
  • Dental ceramics have good aesthetics, biocompatibility, low thermal conductivity, abrasion resistance, and color stability. However poor resistance to fracture and shrinkage during firing process have been limiting factors in their use, particularly in multiunit ceramic restorations. A new method for making all-ceramic crowns that have high strength and low processing shrinkage has been developed and is referred to as the Vita In-Ceram method. This study was performed to investigate the effect of $CeO_2$ addition in borosilicate glasses on the strength of alumina-glass composites. Porous alumina compacts were prepared by slip casting and sintered at $1,100^{\circ}C$ for 2 hours. Dense composites were made by infiltration of molten glass into partially sintered alumina at $1,140^{\circ}C$ for 4 hours. Specimens were polished sequentially from #800 to #2000 diamond disk. and the final surface finishing on the tensile side was received an additional polishing sequence through $1{\mu}m$ diamond paste. Biaxial flexure test was conducted by using ball-on-three-ball method at a crosshead speed of 0.5mm/min. To examine the microstructural aspect of crack propagation in the alumina-glass composites, Vickers-produced indentation crack was made on the tensile surface at a load of 98.0 N and dwell time of 15 sec, and the radial crack patterns were examined by an optical microscope and a scanning electron microscope. The results obtained were summarized as follows; 1. The porosity rates of partially sintered alumina decreased with the rising of firing temperature. 2. The maximum biaxial flexure strength of 423.5MPa in alumina-glass composites was obtained with an addition of 3 mol% $CeO_2$ in glass composition and strength values showed the aspect of decrease with the increase of $CeO_2$ content. 3 The biaxial flexure strength values of alumina-glass composites were decreased with rising the firing temperature. 4. Observation of the fracture surfaces of alumina-glass composites indicated that the enhancement of strength in alumina-glass composites was due to the frictional or geometrical inter-locking of rough fracture surfaces and ligamentary bridging by intact islands of materials left behind the fracture front.

  • PDF

강원도 산지계류 내 유목의 기원과 현존량 (Origin and Storage of Large Woody Debris in a Third-order Mountain Stream Network, Gangwon-do, Korea)

  • 김석우;전근우;서정일;임영협;남수연;장수진;김용석;이재욱
    • 한국환경생태학회지
    • /
    • 제34권3호
    • /
    • pp.249-258
    • /
    • 2020
  • 이 연구는 강원도 산림유역 내 수계(총 11개 계류)를 대상으로 유목의 전수조사를 실시하고, 유목의 발생기원 추적과 함께 하천차수별 현존량과 분포형태를 분석하여 효과적인 산림유역관리기술의 마련을 위한 기초자료를 제공하고자 실시하였다. 총 1,207개 유목의 개체목 형태를 3가지 유형으로 구분하여 분석한 결과, (1) 수간만 있는 것 1,142개(95%) 및 수간과 근주가 함께 있는 것 65개(5%), (2) 자연목 1,015개(84%) 및 벌채목 192개(16%), (3) 침엽수 1,050개(87%) 및 활엽수 157개(13%)로 나타났다. 유목의 현존량(㎥/ha)은 1차수 105.4, 2차수 71.3 및 3차수 35.6으로 하류로 갈수록 점차 감소하였다. 반면 유목의 총량에 대한 유목군의 비율은 1차수 11%, 2차수 43% 및 3차수 49%로 하류로 갈수록 증가하였다. 이 연구에서 조사된 유목의 현존량을 해외의 선행연구와 비교하면, 비록 각 국가·지역별로 기후·지형·산림토양·임분의 구조와 생장량·산림의 교란정도와 관리상태가 다르지만, 유목의 현존량은 임령과 정의 상관관계를 갖는 것으로 나타났다. 이 연구의 결과는 유목을 산림생태계의 산물이자 산지수변림 교란의 지표로서 인식할 필요가 있음을 시사한다. 이를 토대로 앞으로는 산림유역의 생태계뿐만 아니라 하류의 수계환경까지 고려하여 숲가꾸기 산물의 처리나 수변지역의 임분밀도관리 등을 포함한 산림관리기술이 정립되어야 할 것으로 판단된다.

대형공간 구조형식별 이미지 분석에 관한 연구 (An Analytic Study on the Image of the long-span Structural Types)

  • 양재혁
    • 디자인학연구
    • /
    • 제15권4호
    • /
    • pp.263-274
    • /
    • 2002
  • 본 연구는 대형공간 건축의 구조형식별 이미지를 분석하기 위해서 근대이후 대형공간 건축의 대표적인 20가지 구조형식들을 대상으로 구조재료, 마감재료, 주응력, 부재형상, 구성방식, 구조형상 등의 물리적 요소들을 중심으로 이들의 지각 및 감정분석 그리고 평가분석을 하였다. 그 결과, 대형공간 구조의 이미지는 $\ulcorner$친-소$\lrcorner$, $\ulcorner$동-정$\lrcorner$,$\ulcorner$강-약$\lrcorner$ 등의 감정 이미지와 $\ulcorner$우-열$\lrcorner$의 평가 이미지, 그리고 $\ulcorner$규칙-불규칙$\lrcorner$ 이라는 지각 이미지로 대표되고 있다. $\ulcorner$친-소$\lrcorner$ 이미지는 재료의 재질에서 크게 비롯되고 있으며, 부분적으로는 형상에서도 비롯되고 있다. $\ulcorner$강-약$\lrcorner$ 이미지는 대부분 부재형상에서 비롯되고 있다. 전단력, 압축력, 인장축력+압축축력, 인장력 등의 주응력들을 전달하는 부재들은 판, 봉, 골, 색, 막 등이며, 이들 순서대로 부재는 가늘어지고 얇아진다. 이러한 응력과 부재형상은 전체 구조의 시각적인 이미지에도 직접 투영되고 있다. $\ulcorner$동-정$\lrcorner$ 이미지는 구조체 형태의 형상에서 비롯되고 있는데, 구조가 동적으로 인지되는 경우는 개방적이고 예리하게 지각되는 구조이다. $\ulcorner$우-열$\lrcorner$이미지는 구성방법이 짜임새가 있는지, 정밀한지 등의 여부에 따라 결정되고 있다. 우수하게 평가되는 구조는 단순히 하중을 지지하는 것을 넘어서서 전체 건물디자인을 구축하는 디자인 요소로 적극 활용되고 있으며, 2가지 이상의 구조체계로 구성되어 다양한 형태 표현을 창출하고 있는 구조로 나타났다.

  • PDF

합성 Bio-Gas 연소시 발생되는 질소산화물과 일산화탄소 배출에 관한 연구 (A Study on the Emission Factor of NOx and CO by Burning of Synthetic Biogas)

  • 안재호;김태완;이상은
    • 한국환경농학회지
    • /
    • 제26권1호
    • /
    • pp.1-6
    • /
    • 2007
  • 본 연구에서는 바이오가스의 연소엔진을 이용한 에너지 전환시에 발생되는 $NO_x$와 CO의 배출특성을 분석하고 나아가 배출계수를 산정하고자 하였다. 바이오가스의 주성분인 메탄을 70%로 한 합성가스를 이용하여 실험한 결과 연소엔진의 표준상태에서 $NO_x$와 CO가 각각 4 ppm과 100 ppm의 배출농도를 나타내었고, 이는 1.29g/MMBtu와 30.86 g/MMBtu의 배출계수 값을 산정할 수 있었다. 바이오가스의 주성분인 메탄을 60%로 한 약간의 과잉공기의 상태에서는 $NO_x$와 CO가 각각 2 ppm과 200 ppm의 배출농도를 나타내었고, 이는 정격 조건에 비해 투입열량이 적어져 연소온도의 저하로 인하여 열적 반응에 의해 생성되는 $NO_x$는 줄고, CO는 증가함을 알 수 있었다. 미국 EPA의 배출계수를 비교하기 위하여 투입된 연료의 열량을 기준으로 비교해 볼 때 본 연구의 결과가 $NO_x$의 경우 근사한 값을 보여 주었고, 이는 국내 바이오 가스 연소시의 오염배출계수로 잘 적용 가능함을 보여 주었다. 본 연구에서 사용한 가스엔진이 오염배출 측면에서 대기 환경보전법상의 배출 허용기준 내에서 가동됨을 알 수 있었고, 가동조건에 따라 연소온도를 증가시킴으로서 CO의 발생을 저감시킬 수 있으리라 사료된다.

단계성토에 따른 연약지반의 전단강도 및 압밀거동 특성 (Characteristics of Shear Strength and Consolidation Behavior of Soft Ground according to Stage Fill)

  • 방성택
    • 한국지반환경공학회 논문집
    • /
    • 제21권7호
    • /
    • pp.17-26
    • /
    • 2020
  • 해성점토로 구성된 서남해안 지역의 연약지반은 퇴적물의 성분, 입자크기의 분포, 입자형상, 흡착이온 및 간극수의 특성, 조류, 온도 등에 의해 많은 영향을 받는다. 또한, 응력이력, 간극수의 변화, 용탈과정, 가스형성 등의 지반공학적 특성은 매우 복잡한 양상을 나타내고 있다. 본 연구에서는 서남해안 연약지반을 대상으로 압밀에 따른 강도증가 특성을 규명하기 위하여 현장시험 및 실내시험을 통하여 연약지반의 물리적·역학적 특성을 평가하고 성토하중에 의한 지반의 침하, 간극수압, 수평변위 등 연약지반의 압밀거동을 파악하기 위하여 간극수압계, 침하계, 경사계, 층별침하계 등의 계측기를 설치하고, 지반의 전단강도증가를 확인하기 위해 단계별로 피에조콘 관입시험을 실시하였다. 이와 같은 실험을 통하여 단계별 성토에 따른 지반의 전단강도증가를 확인하고 압밀침하량을 측정하여 기존에 제시된 경험적 방법 및 이론에 의한 강도증가와 압밀측정치를 비교하여 강도증가율 및 압밀거동을 분석하였다.

처방전달체계에 대한 사용자 만족도에 영향을 미치는 요인 (Factors Affecting Users' Satisfaction with Order Communicating System)

  • 김창엽;하범만;강길원;김병익;김용익;이진석
    • Journal of Preventive Medicine and Public Health
    • /
    • 제33권4호
    • /
    • pp.436-448
    • /
    • 2000
  • Objectives : To identify the factors affecting users' satisfaction with the Order Communicating System(OCS) and to highlight the factors important for the successful establishment of OCS. Methods : A Users Satisfaction survey was sent to 4,513 people, consisting of 1,503 doctors, 2,379 nurses, 255 pharmacists and 370 administrative workers in 16 hospitals which had introduced OCS. The response rate was 63.9%. Measurement of users' satisfaction was peformed with the instrument which was used in Doll's study. Some aspects of Doll's instrument were adjusted according to the aims of this study. The classifying sections of this survey included age, job and status classification, computer experience, OCS education, duration of daily OCS use, type of order entering, number of personnel in the Hospital Information System's department, cost of OCS, problem frequency, proportion of work managed by hand, OCS type, and Hospital establishment type. Results : There was a positive correlation between satisfaction level and managerial status throughout all job classifications. Irrespective of the importance of OCS education as a factor relating to users' satisfaction, the additional work load caused by OCS lowered users' satisfaction. Different factors affected users' satisfaction according to job and status classification. The composition of factors affecting the pharmacist and administrative worker satisfaction levels was simpler than that of the doctor and nurse levels. There were no statistically significant differences between the actual computer experience duration of daily OCS use and users' satisfaction with OCS. Conclusions : There was an understandable relationship between users' attitude to OCS and factors affecting users' satisfaction. The results of this study could be used as a basis for the successful expansion of the operation of OCS. But more detailed studies on users' satisfaction and further improvements of methodologies are required for the successful establishment of OCS.

  • PDF

페로실리콘 산업부산물 활용 시멘트 콘크리트의 내구성능 평가 (Durability Evaluation of Cement Concrete Using Ferrosilicon Industrial Byproduct)

  • 김창영;안기용
    • 한국건설순환자원학회논문집
    • /
    • 제11권1호
    • /
    • pp.89-96
    • /
    • 2023
  • 산업부산물인 페로실리콘을 사용한 시멘트 콘크리트의 내구성능을 평가하기 위하여 페로실리콘의 치환율을 3단계로 변화시켜 제조한 시멘트 경화체의 염화물침투저항성, 알칼리실리카 반응성에 대하여 평가하였다. 페로실리콘을 사용한 시멘트 콘크리트의 내구성능은 화학조성이 유사한 실리카흄과 비교하여 평가하였으며, 에너지 분산형 X선 분광법, 공극측정 및 X선 회절분석 등 기기분석을 통하여 페로실리콘 콘크리트의 미세 구조적 특성을 고찰하였다. 그 결과, 페로실리콘을 10 % 치환한 경우 OPC콘크리트보다 높은 강도발현 특성을 보인 반면 치환율이 20 %, 30 % 증가할수록 압축강도는 낮게 발현되었다. 그러나 염화물 침투저항성에 대한 결과는 치환율이 증가할수록 우수한 결과를 나타내었으며, 실리카흄을 사용한 경우에 비하여 페로실리콘을 사용한 콘크리트의 내구성은 약간 떨어지지만 OPC에 비해서는 우수한 결과를 나타내었다. 이는 페로실리콘의 실리카(SiO2) 함량이 높아 더 많은 C-S-H 겔을 생성하여 더 밀실한 공극 구조를 만들었기 때문이라 생각된다. 길이변화시험을 통한 규산염 바인더에 대한 알칼리실리카반응의 위험성은 대부분 0.2 % 미만으로 나타났으며, 페로실리콘 및 실리카흄을 사용한 모르타르 모두 치환율이 증가할수록 알칼리실리카 반응에 대한 저항성은 우수한 것으로 나타났다. 따라서 고가의 실리카흄을 사용하는 대신 산업 폐기물을 재사용하면 제조 중 환경 부하를 줄이고 비용을 절약할 수 있을 것으로 판단된다.