• Korean Journal of Microbiology
• /
• v.36 no.3
• /
• pp.196-202
• /
• 2000

A gene for cellulolytic xylanase of Bacillus circulnns ATCC21365 was cloned on pUC 19 in Eschwichia coli. The recombinant plasniid pXLI80 contained an 1.8 id, inselt composed of0.5 kb and 1.3 kb PslI fragments derived from B, circulans. The 0.5 kh fragment in the upstream region of 1.3 kb one was confirmed lo be indispensable for not only expression but also hyperexpression of the cloned gene. The transformant overproduced the xylanase 135 times greater than that produced by the orlginal B circulnns. The optimum pH and temperature of the cloned enzyme we]-e pH 5.2 and $60^{\circ}C$, respectively. Heal pretl-eatment at TEX>$55^{\circ}C$C for 1 Indid not cause inhibition of the activity of this enzyme. The elm.ynie could hydl-olyre CMC and lichenan as well as xylan to produce xylose(or GI), xylohiose(or G2) and xylolnose(or G3) as inah products. Hence We defined the cloned enzyme as a cellulolytic xylanase. The SDS-PAG electrophoretic mobility and zyiiogram of this enzyme derived from whole cell extracts or c~~lture supematants or E. coli(pXL180) indicated a molecular weight of 45,000 and nonprocessing of the enzyme in the peilplasln of E. coli.

• Korean Journal of Food Science and Technology
• /
• v.48 no.1
• /
• pp.77-85
• /
• 2016

In this study, 4-week-old rats were fed bread supplemented with Terminalia chebula (TC), Plantago asiatica (PA), Linder obtusiloba (LO), and Capsosiphon fulvescens (CF) ethanol extracts, to determine the decrease in blood glucose levels, as well as the anti-inflammatory and lipid-enhancing effects. Previous studies have demonstrated the antioxidative effects of these ethanol extracts. After sacrifice, the liver tissue, whole blood, and serum samples were collected for biochemical analysis. The results showed a significant decrease in blood glucose level, lipid peroxidation, malondialdehyde (MDA) level, HbA1c level, total cholesterol, and low-density lipoprotein (LDL)-cholesterol (p<0.05) and an increase in high-density lipoprotein (HDL)-cholesterol level in rats fed bread supplemented with LO and CF ethanol extracts (p<0.05). Therefore, the results of this study demonstrate that bread supplemented with LO and CF ethanol extracts can potentially affect the blood glucose level and lead to lipid enhancement.

• Korean Journal of Materials Research
• /
• v.7 no.3
• /
• pp.188-195
• /
• 1997

Copper ions were adsorbed on amorphous Si films by spincoating of Cu solutions and were employed as surface nucleation sites for low-temperature crystallization. The crystallization temperature can bc lo~vered down to $500^{\circ}C$ and rhe crystallization time can be shortened by Cu adsorption. The Cu-adsorbed amorphous films were crystallized by fractal growth with the shape of tree branches. The fractal size ranged from $30 to 300{\mu}m$, depending on the Cu solution concentration. The fractals consisted of f e a t h e r like elliptical grains with the size of $0.3~0.4{\mu}m$. which was comparable to that of the intrinsic films crystallized at $600^{\circ}C$. Both the nucleation activation energy and grotvth activation energy decreased as the Cu concentration in the solution increased. The results suggest thcit the adsorbed Cu increases preferred nucleation sites at the surface and enhmces crystallization by reducing thc activation energies of nucleation and growth.

• Journal of the Korean Vacuum Society
• /
• v.19 no.4
• /
• pp.307-313
• /
• 2010

One-dimensional cubic phase silicon carbide nanowires (${\beta}$-SiC NWs) were efficiently synthesized by thermal chemical vapor deposition (TCVD) with mixtures containing Si powders and nickel chloride hexahydrate $(NiCl_2{\cdot}6H_2O)$ in an alumina boat with a carbon source of methane $(CH_4)$ gas. SEM images are shown that the growth temperature (T) of $1,300^{\circ}C$ is not enough to synthesize the SiC NWs owing to insufficient thermal energy for melting down a Si powder and decomposing the methane gas. However, the SiC NWs could be synthesized at T>$1,300^{\circ}C$ and the most efficient temperature for growth of SiC NWs is T=$1,400^{\circ}C$. The synthesized SiC NWs have the diameter with an average range between 50~150 nm. Raman spectra clearly revealed that the synthesized SiC NWs are forming of a cubic phase (${\beta}$-SiC). Two distinct peaks at 795 and $970 cm^{-1}$ in Raman spectra of the synthesized SiC NWs at T=$1,400^{\circ}C$ represent the TO and LO mode of the bulk ${\beta}$-SiC, respectively. XRD spectra are also supported to the Raman spectra resulting in the strongest (111) peaks at $2{\Theta}=35.7^{\circ}$, which is the (111) plane peak position of 3C-SiC. Moreover, the gas flow rate of 300 sccm for methane is the optimal condition for synthesis of a large amount of ${\beta}$-SiC NW without producing the amorphous carbon structure shown at a high methane flow rate of 800 sccm. TEM images are shown two kinds of the synthesized ${\beta}$-SiC NWs structures. One is shown the defect-free ${\beta}$-SiC NWs with a (111) interplane distance of 0.25 nm, and the other is the stacking-faulted ${\beta}$-SiC NWs. Also, TEM images exhibited that two distinct SiC NWs are uniformly covered with $SiO_2$ layer with a thickness of less 2 nm.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.6
• /
• pp.419-423
• /
• 2003

Bacterial blight caused by Xantomonas oryzae pv. oryzae is one of the most serious diseases of rice especially in southern area of Korea. Three races, $\textrm{K}_1$, $\textrm{K}_2$ and $\textrm{K}_3$, are the most dominant species. lo improve rice breeding efficiency using marker assisted selection, some RFLP markers were surveyed for polymorphism between resistant and susceptible to $\textrm{K}_1$ and $\textrm{K}_3$. And, 127 doubled-haploid (DH) lines derived from Milyang121/HRl1650-1-4-2 and 131 DH lines derived from Milyang123/HR10624-AC5 were evaluated to bacterial blight ($\textrm{K}_1$ and $\textrm{K}_3$). Milyang121 and HR10624-AC5 have Xa-1, resistant to $\textrm{K}_1$ race, and Milyang123 has Xa-3, resistant to $\textrm{K}_1$ and $\textrm{K}_3$ race. Three markers, RZ590, RZ536 and RG303, showing polymorphism between parents and resistance gene, Xa-1 and Xa-3, were analysed in the two combinations of DH lines. The segregation pattern of resistant DH population of Milyang123/HR10624-AC5 to susceptible showed 3:1 and 1:1 in $\textrm{K}_1$ and $\textrm{K}_3$ race. In three RFLP markers, RZ590 was linked to Xa-1 on chromosome 4, and RZ536 and RG303 were linked to Xa-3 on chromosome 11. The map distance between Xa-1 and RZ590 was 3.1cM on chromosome 4, and Xa-3 and RZ536/RG303 were 7.6/16.0cM on chromosome 11, respectively. The results of RFLP mapping will be useful for the selection and pyramiding of bacterial blight resistant genes.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.9
• /
• pp.843-852
• /
• 2009

In this paper, we present design, fabrication, and measured results for a frequency upconverter for a wireless communication system of UAV(Unmanned Aerial Vehicle). The specifications of such wireless communication system requires the special features of maximum range of communication as well as deployment in UAV and repairing. The frequency upconverter operating at $5.25{\sim}5.45\;GHz$ in C-band was designed and fabricated considering such special features. The AGC function was included because the required output power should be constant for optimal system operation. The fabricated upconverter showed a constant output power of $+2{\pm}0.5\;dBm$ for the $-15{\sim}-10\;dBm$ input. Spuriouses were below -60 dBc and the adjacent leakage power was below -40 dBc. In addition, LO sources in the upconverter was implemented using the frequency synthesizer with step 1 MHz. This is for the application to the situation where multiple UAVs employed and the possible change of the permitted frequency band. The synthesizer showed a phase noise of -100 dBc/Hz at the 100 kHz frequency offset.

• Korean journal of applied entomology
• /
• v.37 no.2
• /
• pp.193-198
• /
• 1998

Experiments were conducted to investigate the population fluctuation, developmental periods, fecundity, hatching rate and demage of Citrus red mite (Panonychus citri M.) on Yuzu trees (citrus junos T.) from 1996 to 1997. Citrus red mite occurred from May to November and made two peaks. The first peak was in July to August and the secondary peak was in October. Density of the second peak was higher (9.5 miteslleaf) than that of the first peak. In the constitution rate of each developmental stage of citrus red mite on Yuzu leaves, egg stage occupied 85%. At the four constant temperature (15, 20, 25, 30 + 1$^{\circ}$C, RH 60 + lo%, 14L- IOD) conditions, the developmental period from egg to adult was 41 .l, 15.5, 11.0 and 9.4 days ; Mean longevity of adult was 23.3, 8.3, 6.3, and 6.1 days; Mean number of egg laid per female per day was 1.6, 3.2, 4.5, 4.0 eggs; Mean hatching rate was 66.6, 85.7, 90.7 and 94.7% at above temperature, respectively. When sprayed acaricide at different density of Citrus red mite, the growth of young Yuzu tree were better at low density. Defoliation rate during winter was 13.5, 20.6, 53.1, 72.6% at 4 control density 1 , 3, 6 mites per leaf and uncontrolled (10 ( ). When every time spray acaricide under 3 mites per leaf, defoliation rate during winter suppressed above 50% compare to uncontrol 72.6%.

• The Korean Journal of Pesticide Science
• /
• v.9 no.4
• /
• pp.303-310
• /
• 2005

This study was performed to examine analytical method of a quinolone compound, oxolinic acid in paddy soil by HPLC coupled with UV detector. Two types of soil texture in different regions were used for this experiment. Oxolinic acid was extracted by a 4 M-KOH : MeOH(1 : 3, v/v) mixtures and acidified followed by liquid-liquid partitioning in dichloromethane. Dichlormethane layer was dehydrated, evaporated and analyzed by HPLC (262 nm). Retention time was 10.2 min. The standard calibration curve of oxolinic acid showed linearity ($r^2>0.999^{**}$, y=378.99x+135.08) in the range of $1{\sim}40$ ng. The mean recoveries, evaluated from fortified soil samples at two concentration levels of 0.2 mg/kg and 1.0 mg/kg, were $90.9{\pm}4.52%$(C.V. 4.97%) and $95.0{\pm}0.23%$(C.V. 0.24%) for soil 1 and $92.2{\pm}1.15%$(C.V. 1.25%) and $93.1{\pm}0.31%$ (C.V. 0.33%) for soil 2, respectively The detection limits of two types of soils were same as 0.05 ppm. Overall, the present analytical method of oxolinic acid by HPLC coupled with UV detector seems to be used reasonably.

• Ocean Science Journal
• /
• v.40 no.1
• /
• pp.11-16
• /
• 2005

Correction factors based on the catch ratios of egg and larval densities in the southern waters of Korea were estimated for anchovy Engraulis japonica. This was undertaken in order to adjust ichthyoplankton data from different sampling methods, gear types and time. Samples were collected during ichthyop1ankton surveys in Korean waters from 1983 to 1994. The ratios for egg densities obtained in vertical tows with a NORPAC net (ring $\Phi$, 45 cm) compared to those obtained in oblique tows with a KOB net (ring $\Phi$, 80 cm) were 0.86 (CV = 0.65), 1.22 (CV = 0.36), and 0.93 (CV = 0.42) for early, middle, and later developmental stages, respectively. The ratios for larval densities for vertical and oblique tows varied depending on size. For yolk-sac and small larvae (< 4 mm), the ratios were 3.08 (CV = 0.45) and 1.98 (CV = 1.34), while those of 4-6 mm, 6-8 mm, and 8-10 mm larvae were 0.44 (CV = 1.31), 0.45 (CV = 1.70), and 0.56 (CV = 2.50), respectively. Ratios of day/night densities for larvae of 4-10 mm lengths were lower (0.01-0.06) in offshore catches than values obtained in coastal areas (0.440.46) and similar values (0.16-0.04) for vertical and oblique tows. Our results indicated that vertical towing is more efficient for sampling early life stages (from eggs to larvae less than 4 mm long), while oblique towing is more efficient for larvae longer than 4 mm due to depth preferences for each developmental stage (e.g., changes in egg buoyancy and vertical migration oflarvae).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6C
• /
• pp.751-762
• /
• 2004

In this paper, we propose the method to derive new GRM(Generalized Reed-Muller) coefficients for each 2$^n$ polarities using Triangle cell. As the existing methods to generate GRM coefficients, there are Green's method to operate transform matrix with a given RM coefficient and Besslich's method to get other polarities using basic transfer matrices repeatedly. In this paper, Triangle cell is defined so as to obtain GRM coefficients efficiently. After arranging 2$^n$ given RM coefficients of a first row of Triangle cell, sequence modulo sum is peformed in parallel to low column by a fixed numerical formula. To prove the efficiency of proposed arithmetic method, it is compared with Besslich’s method. As the compared result, to calculate GRM coefficients of all polarities to n input variables, Besslich’s method needs 2$^n$$^{-1}$ ${\times}$(2$^n$-1) two-input Ex-ORs and the proposed method needs 2${\times}$(the number of Ex-ORs for n-1 variables)+3$^n$$^{-1}$ for the same system complexity - (lo $g_2$$^n$) $T_{X}$./.