• 건축역사연구
• /
• 제4권1호
• /
• pp.71-78
• /
• 1995

This study aims 1) to estimate the form of living house of pre-urbanization of Inchon, and 2) to ensure originality of to be achieve urban plan and living space plan which is base on local character by 3) arranging changed character of living space through the urbanization sequence by invest of house in natural village at Pupyung. The character of arranging living space of house at Pupyung is placing Sarang-chae(husband's block of house) instead of making another Haenrang-chae (visitor's block of house) and Sarang-chae is attach importance to Man's living space but today, have disappearing the uses of Sarang-bang (husband's living space) because by Man lives An-bang(originally woman's space). The character of plan is arranging room in both side of Maru(wooden living floor) in spite of different structure, and the uses of plan or room is changing to fit to purpose of according to environment of living. Generally, the structure is made by natural stone and cubed column, and used smaller member cause by rare wood material.

• 설비공학논문집
• /
• 제17권11호
• /
• pp.1043-1049
• /
• 2005

The purpose of this study is to improve indoor air quality of the barracks which have been changed from floor-type living barracks to bed-type living barracks since 2003. Therefore, the ventilation rates of newly constructed two type barracks were simulated with the various building materials including VOCs and HCHO components. And indoor air quality of two type living barracks was measured by the field experiments. With these steps, the measures for upgrading indoor air quality depending on building material types and ventilation rate are suggested.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.325-327
• /
• 1995

A new gate drive circuit of classic converter for a switched reluctance motor is presented. Conventional gate drive circuit usually consists of the isolated power supplies and signal transferring devices for isolation, such as photo coupler, pulse transformer, and gate drive chips. The proposed gate drive circuit consists of resistors, capacitors, and zenor diodes without isolated power supplies, that make the drive circuit simple and reduce the material cost. The operational modes are classified and analyzed. The characteristics of the phase current and the gate signal of upper switches is investigated with the variation of duty ratio through the experiments.

• 한국지역사회생활과학회지
• /
• 제18권1호
• /
• pp.39-53
• /
• 2007

The purpose of this study was to determine the characteristics of an experimental protective clothing material with regard to comfort and isolation from the hazardous heavy metals produced in municipal waste incineration. An analysis was conducted on the total concentrations of heavy metals in some parts such as surface, middle layer, and interior for the treated fabric, and the untreated one, and working clothes. We conclude that the processed fabric with charcoal for working clothes showed the least exposure to heavy metals of the three. Working clothes worn by workers during waste incineration were much more contaminated than the untreated and treated materials. The material of working clothes could be chosen according to the function with regard to its original chemical characteristics, which are the proper results of the dyeing process. The processed fabric material has high degrees of moisture regain, thermal insulation, water vapor penetration, and antibacterial function; consequently, it is much more comfortable to wear. The fabric material proposed in this research contributed much more to blocking heavy metal concentrations (such as Cd, Pb, Cu, Cr, Zn, Mn) than did the fabric of working clothes at present. Consequently, we strongly suggest that the material of working clothes be upgraded by adopting the above-mentioned charcoal-processed fabric. Materials of working clothes must be improved to increase comfort and prevent harmful gas, flying dust, and heavy metals from permeating the fabrics.

• 한국실내디자인학회논문집
• /
• 제19권2호
• /
• pp.144-154
• /
• 2010

This study aimed at analyzing physical characteristics of art-walls which is a focal point in contemporary interiors of the apartment houses. The factors for the analysis were types of apartments, positions, widths, compositions of elevation, and materials of art-walls. 89 art-walls were selected for the analysis ranging from $76m^2$ to $187m^2$. The result shows that wood was mostly applied to art-walls in small types of apartment in combination with other materials, and the composition of elevation was asymmetric. If the width of art-walls became smaller, the elevation was dominantly designed with symmetrical grid using tiles. Tiles turned out to be the general material for the single-applied material. However, if more than two materials were applied to art-walls, wood was chosen as the main material. Regardless of the types of apartment, big-sized art-walls were usually designed in the living room, and two different types of materials were applied to the walls. It reveals that art-walls of apartment houses have been planned and designed with focuses on the living room in the housing space. To make a modular panel for the art-walls, 400mm and 800mm sizes were both suggested, 400mm for the smaller composition, and 800mm for the larger composition of the art-walls. A Wall image is becoming more essential to the living space these days, because it can be both decorative and also supportive to residents' various individualities. Therefore, it is expected that further researches on art-walls are continuously performed, and also various designs of art-walls based on the modular system are developed in the near future.

• 한국주거학회논문집
• /
• 제19권3호
• /
• pp.21-29
• /
• 2008

To investigate the actual conditions on the living environment of group-homes for the elderly and their living environment, 4 group-homes were surveyed. As the results, conditions of location for the group-home of the elderly looked positive, on the other hand, safety for criminal prevention, accessability and convenient facilities were not on level satisfied. The average area of each space in the group-home indicated that the bed room was $11.21\;m^2$, the living room $28.13\;m^2$, the kitchen $23.59\;m^2$, and the bath room had an integrated type of bath room and toilet $7.63\;m^2$. The physical environments of each space in the group-home were investigated, In bed room, door, windows and illumination were relatively good but safety was extremely inferior. Living room mostly looked good except the doorsill which needs refurbishment. In kitchen, cooking table, windows, illumination, ventilator were somewhat satisfactory but gas-warning device should have been installed. In addition, in bath room and toilet, location, door, window, illumination and finished material were satisfactory. But the stepped difference between the bath room and other space, safety-bar, emergency bell and floor heating system were seriously deteriorated and must be improved for the safety of the elderly. Conclusively, living environment of group-home for the elderly is mainly satisfactory but it was necessary to take a consideration for their safety.

• 한국주거학회논문집
• /
• 제16권4호
• /
• pp.101-108
• /
• 2005

Because of the airtightness of building, misuse of building materials and abuse of furniture, indoor air pollution problems have been increasingly concerned especially with apartment buildings. To improve the IAQ(Indoor Air Quality) in apartment building, this study was aimed at analyzing the factor of interior building material and furniture and calculating the ventilation rate of living room and bed room according to the surface area of interior building material and furniture in terms of VOCs(Volatile Organic Compounds) and HCHO(Formaldehyde). The results of this study are as follows; 1) In the concerned rooms, the living room has less pollution emission rate L(surface area/volume) than that of the bed room but, the living room needs more ventilation rate than that of the bed room because of built-in furniture in terms of VOCs and HCHO. 2) Built-in interior furniture is very important factor in IAQ problems of apartment building, but until now there is no provision about the built-in furniture, so that the provision must be regulated to control the IAQ. 3) To control the IAQ problem, the effective ventilation plans must be established according to the required ventilation rate by means of natural or mechanical ventilation method.

• 폴리머
• /
• 제32권4호
• /
• pp.366-371
• /
• 2008

The controlled/living cationic polymerization of $\alpha$-methylstyrene (${\alpha}MeSt$) and sequential block copolymerization of isobutylene (IB) with ${\alpha}MeSt$ were achieved using 2-chloro-2,4,4-trimethylpentane (TMPCl)/titanium tetrachloride ($TiCl_4$)/titanium isopropoxide ($Ti(OiPr)_4$)/2,6-ditert-butylpyridine (DtBP) initiating system in $CH_3Cl$/hexane(50/50 v/v) solvent mixture at $-80^{\circ}C$. The polymerization rate decreased with increasing $[Ti(OiPr)_4]/[TiCl_4]$ ratio in the homopolymerization of ${\alpha}MeSt$. The effects of $[Ti(OiPr)_4]/[TiCl_4]$ ratios and $PIB^+$ molecular weight on the polymerization rate and blocking efficiency were also investigated. Well-defined poly(isobutylene-b-$\alpha$-methylstyrene)s were demonstrated by $^1H$-NMR and triple detection SEC; refractive index (RI), multiangle laser light scattering (MALLS) and ultraviolet (UV) detectors. Blocking efficiencies for the poly(isobutylene-b-$\alpha$-methylstyrene)s of almost 100% were obtained when ${\alpha}MeSt$ was induced by PIB's of $M_n\;{\geq}\;41000$ at $[Ti(OiPr)_4]/[TiCl_4]=1$. Differential scanning calorimetry (DSC) of the block copolymers showed two glass transition temperatures, thereby demonstrating microphase separation.

• 대한건축학회논문집:구조계
• /
• 제34권3호
• /
• pp.43-52
• /
• 2018

This study is conducted to evaluate the performance of ceramic panels and painting materials for humidity control which are developed in non-plastic room temperature hardening structure as part of a project to improve a residential environment for the low-income class, rather than the performance of high-priced humidity control materials that are produced with the existing plasticity processing. The testing methods included the measurements of absorption & desoprtion of humidity per material; Mock-up Testing; an evaluation method of comparing the absorption & desoprtion performances of Ecocarat, ceramic panels and painting materials through Living Lab. According to the measurements of absorption & desoprtion per material, ceramic panels, E panel, and ceramic painting material showed 73.3g/m2, 96.6g/m2, and 111.1g/m2, respectively. That is, the performance of humidity control of each material was found to be good in the order of: Ceramic Paint > E panel > Ceramic Panel. According to performance evaluation testing with Mock-up test and Living Lab, Ceramic Paint, Ecocarat, and Ceramic Panels showed better absorption & desoprtion performances in the order.

• KIEAE Journal
• /
• 제5권2호
• /
• pp.27-34
• /
• 2005

The purpose of this study were to examine actual conditions of apartment residents living with their companion animals and to identify their residential stress and needs of planning elements under those conditions. Questionnaire survey was adopted in this study, and 100 cases were used for data analysis. The subjects for this study were limited to the residents breeding pets in their apartments. The results of this study are as follows: Most of the residents share their living spaces with pets together like their family without spatial restrictions. They indicated problems related to breeding pets in their residence such as walking the dog, cleaning home, leaving pets alone, noise and unpleasant smell. However, they didn't seem to be stressed a lot for their living environments. In terms of residential planning elements, floor plans for effective natural ventilation, balcony with sufficient sunlight, sound proof system, easy-maintenance interior material, unlash area, rubbish bin, mechanical ventilation and central vacuum system and safe electric outlet were highly indicated.