• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.433-436
• /
• 2008

Silicate계 표면보호재는 Sodium silicate 혹은 Lithium 및 Potassium silicate를 주성분으로 하는 수용액이며 탄산화한 부분의 알칼리 부여와 성능저하가 예상되는 부위의 강화 등 콘크리트 성능회복에 주로 이용된다. Silicate계는 콘크리트에의 침투성을 향상시키기 위해 계면활성제나 콘크리트 중의 Calcium hydroxide와의 반응을 개선하기 위한 반응촉진제, 경화제 등이 첨가된다. Sodium silicate계는 습윤 바탕에 적용하며 Lithium silicate계는 건조바탕에 도포하여 양생을 실시하는 것이 일반적이다. 콘크리트 구조물 외관의 손상없이 비교적 간편하게 시공할 수 있으며 미세기공을 완전하게 메우지 않으므로 콘크리트 본래의 호흡성을 손상하지 않는다. 본 연구에서는 콘크리트 침투성 표면보호재로서 가격이나 시공성에서 우수한 Lithium 및 Potassium silicate를 이용하여 부유 오염원 제거를 위한 친수성 표면형성과 상온경화가 가능한 표면보호재를 제조하였으며, 제조된 표면보호재의 탄산화 저항성 및 Cl- 침투저항성, 동결융해 저항성 등의 내구성능에 대해 검토하고자 한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 추계 학술논문 발표대회
• /
• pp.91-94
• /
• 2007

It is essential every concrete structure should continue to perform its intended functions, that is maintain its required strength and durability, during the service life. However, deterioration occurs more progressively from the outside of concrete exposed to severe conditions. Deterioration in the concrete structure is due to carbonation and chloride ion attack. Therefore, concrete structure is needed to surface protection for increase durability using impregnant. Impregnant classify into two large groups in polymeric and silicate materials. Silicate impregnant is included silane and alkali silicate(sodium and lithium silicate). Thus, this study is concerned with carbonation and chloride ion resistance of self cleaning hydrophilic impregnant of concrete structure using lithium and potassium silicate. From the experimental test result, lithium and potassium silicate have a good properties as a carbonation and chloride ion resistance. Lithium and potassium silicate make good use of hydrophilic impregnant.

• 한국건설순환자원학회논문집
• /
• 제1권3호
• /
• pp.233-239
• /
• 2013

콘크리트의 표면보호제은 표면으로부터 함침제를 함침시켜 표층부의 개질을 목적으로 사용하며 주로 Silane계 및 Silicate계 재료가 사용된다. 일반적으로 이용되는 Silicate는 Sodium과 Lithium silicate이며 탄산화한 부분의 알칼리 부여와 성능저하가 예상되는 콘크리트 부재의 구체 강화 등 성능회복을 목적으로 사용한다. 본 연구에서는 Self-Cleaning 실리케이트계 콘크리트 표면보호제로서 TEOS, $TiO_2$, Lithium silicate를 사용하여 노출 및 컬러 콘크리트 등의 고기능성이 요구되는 건축물에 적용이 가능한 Self-Cleaning 실리케이트계 콘크리트 표면보호제를 제조하였다. 또한 제조된 표면보호제의 건축물 적용을 위한 표면접촉각, 방오성능, 표면특성 및 조직관찰 등의 성능을 검토하였다. 실험결과 Self-Cleaning 실리케이트계 콘크리트 표면보호제를 적용한 시험체는 접촉각 $20^{\circ}$ 이하의 친수성을 보였고 기능성 부여가 가능하므로 표면보호제로서 사용이 가능하다.

• 한국분말재료학회지
• /
• 제24권2호
• /
• pp.87-95
• /
• 2017

Lithium silicate, a lithium-ion conducting ceramic, is coated on a layer-structured lithium nickel manganese oxide ($LiNi_{0.7}Mn_{0.3}O_2$). Residual lithium compounds ($Li_2CO_3$ and LiOH) on the surface of the cathode material and $SiO_2$ derived from tetraethylorthosilicate are used as lithium and silicon sources, respectively. Powder X-ray diffraction and scanning electron microscopy with energy-dispersive spectroscopy analyses show that lithium silicate is coated uniformly on the cathode particles. Charge and discharge tests of the samples show that the coating can enhance the rate capability and cycle life performance. The improvements are attributed to the reduced interfacial resistance originating from suppression of solid-electrolyte interface (SEI) formation and dissolution of Ni and Mn due to the coating. An X-ray photoelectron spectroscopy study of the cycled electrodes shows that nickel oxide and manganese oxide particles are formed on the surface of the electrode and that greater decomposition of the electrolyte occurs for the bare sample, which confirms the assumption that SEI formation and Ni and Mn dissolution can be reduced using the coating process.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.645-648
• /
• 2006

Normally, deterioration in the concrete structure is due to carbonation and chloride ion attack. Therefore, concrete structure is needed to surface protection for increase durability using impregnant. Impregnant classify into two large groups in polymeric and silicate materials. Silicate impregnant is included silicate and alkali silicate(sodium and lithium silicate). Thus, this study is concerned with self cleaning hydrophilic property of concrete structure using silicate impregnant. From the experimental test result, TEOS and lithium silicate make good use of hydrophilic impregnant.

• 한국안전학회지
• /
• 제8권2호
• /
• pp.30-38
• /
• 1993

To increase fire proofing characteristics of protective coating based on soluble alkali silicate, silicate coatings were studied on thermal properties, IR spectroscopy, solubility and intumescence. Intumescence and solubility of the samples were dependent on the strength of cationic cross-links between polysilicate particles. The degree of intumescence and solubility decrease K-silicate > Na-silicate > Li-silicate in the order. Especially Si$_2$O$_{5}$ $^{-2}$ crystalline regions were found to exist in Potassium silicate sample. Mixture of two kinds of silicate, for example, Lithium silicate when added to sodium silicate or potassium silicate was find to significantly reduce efflorescence and increase water resistance. This appears to be a result of stronger crosslinking between polysilicate particles by the small lithium cation.

• 한국세라믹학회지
• /
• 제24권3호
• /
• pp.227-234
• /
• 1987

With the content of ZnO varing from 10.5 to 47.4 wt%, the crystallization of lithium zinc silicate glass was investigated by DTA, XRD, and SEM. In this work P2O5 was used as nucleation agent. The crystallization temperature was found to increase with the content of ZnO and the microstructure of formed crystalling phases was studied through the scanning electron microscopy. According to the XRD analysis, the crystal phases formed are summarized as follows. 1) The major phases are lithium orthosilicate, lithium disilicate and quartz at 10.5 wt% ZnO. 2) Lithium zinc silicate polymorphous and cristobalite occur in the composition varying 21.3 to 30.8 wt% ZnO. 3) At composition containing 47.4wt% ZnO some quantity of willemite is formed.

• 대한치과의사협회지
• /
• 제56권3호
• /
• pp.159-166
• /
• 2018

지르코니아 강화 리튬 실리케이트 세라믹 재료는, 현재 널리 사용되고 있는 e.max(리튬디실리케이트 세라믹) 재료에 비하여 더 개선된 강도를 지니고 있다. 단일 크라운의 수복에 사용될 수 있으며, 1.5mm 의 두께를 확보하는 것이 예지성 있는 치료를 위해 매우 중요하다. Celtra Duo의 경우 열처리를 수행하는 것이 강도나 마모 저항성 측면에서 도움이 될 것이다. 접착을 위해서는 불산의 처리가 도움이 되며, 너무 짧은 시간의 불산은 접착 강도의 개선에 도움을 주지 못할 수 있으므로 충분한 시간의 불산 처리가 필요하다. 지르코니아 강화 리튬 실리케이트 세라믹 재료는 실험실 연구가 지속적으로 수행되고 출판되고 있지만, 아직 신뢰할만한 임상연구는 매우 부족한 실정이다. 추가적인 임상연구를 통해 과학적인 근거를 마련하는 것이 매우 중요한 부분이 될 것이다.

• 한국세라믹학회지
• /
• 제45권11호
• /
• pp.719-724
• /
• 2008

Every concrete structure should continue to perform its intended functions such as to maintain the required strength and durability during its lifetime. Deterioration of the concrete structure, however, occurs more progressively from the outside of the concrete exposed to severe conditions. Main deteriorations in concrete structures result from carbonation, chloride ion attack and frost attack. Concrete can therefore be more durable by applying surface protection to increase its durability using impregnants, which are normally classified into two large groups in polymeric and silicate materials. Concrete impregnants are composed of silanes and alkali silicates (sodium, potassium and lithium silicate). Thus, this study is concerned with elevating the carbonation and Cl- penetration resistance of concrete structures by applying alkali silicate hydrophilic impregnants including lithium and potassium silicates. From the experimental test results, lithium and potassium silicates produced a good improvement in carbonation resistance and are expected to be used as hydrophilic impregnants of concrete structures.

• 한국세라믹학회지
• /
• 제25권5호
• /
• pp.431-436
• /
• 1988

The properties of scid-resistance to boiling HCl, thermal expansion coefficient and softening temperature of mother glass and glass-ceramic of LAS systems were investigated at the contents of SiO2 varing from 57 to 67wt%. The nucleation and growth of crystalline phase of LAS compositions were carried out at 50$0^{\circ}C$ and $700^{\circ}C$. The crystalline phase jconsists of lithium alumino silicate, lithum meta silicate, lithium disilicate, $\alpha$-crystobalite and $\alpha$-quartz. Lithium alumino silicate(virgilite) is the major crystalline phase in the glass ceramics. The degree of acid resistant property was increased in proportion with the silica content for both glass and ceramics. Glass-ceramic gives lower acid-resistance and thermal expansion coefficient while softening temperature shows higher for glass-ceramic than for mother glass.