• 한국전기전자재료학회논문지
• /
• 제18권1호
• /
• pp.68-74
• /
• 2005

In this work, polymerization conditions of the gel polymer electrolyte (GPE) were studied to obtain better electrochemical performances in a lithium-ion polymer battery. When the polymerization temperature and time of the GPE were 70$^{\circ}C$ and 70 min, respectively, the lithium polymer battery showed excellent a rate capability and cycleability. The TMPETA (trimethylolpropane ethoxylate triacrylate)/TEGDMA (triethylene glycol dimethacrylate)-based cells prepared under optimized polymerization conditions showed excellent rate capability and low-temperature performances: The discharge capacity of cells at 2 Crate showed 92.1 % against 0.2C rate. The cell at -20 $^{\circ}C$ also delivered 82.4 % of the discharge capacity at room temperature.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.72-75
• /
• 2009

In this paper, lithium-ion-polymer battery based standalone photovoltaic energy storage is presented. conventional system was difficult to choose hi-directional DC-DC converter because of unbalanced voltage of batteries. The other side, lithium-ion-polymer battery hardly contains unbalanced voltage between each batteries. And Lithium Polymer Battery is clean battery because is doesn't contain heavy metals such as Nickel, Cadmium. We analyzed validity of algorithms according to load pattern for the system through the simulation and experimental results.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
• /
• pp.88-90
• /
• 2003

The purpose of this study is to research and develop tin oxide-flash composite for lithium Ion polymer battery. Tin oxide is one of the promising material as a electrode active material for lithium Ion polymer battery (LIPB). Tin-based oxides have theoretical volumetric and gravimetric capacities that are four and two times that of carbon, respectively. We investigated cyclic voltammetry and charge/discharge cycling of SnO-flyash/SPE/Li cells. The first discharge capacity of SnO-flyash composite anode was 720 mAh/g. The discharge capacity of SnO-flyash composite anode 412 and 314 mAh/g at cycle 2 and 10 at room temperature, respectively. The SnO-flyash composite anode with PVDF-PMMA-PC-EC-$LiClO_4$ electrolyte showed good capacity with cycling.

• Bulletin of the Korean Chemical Society
• /
• 제33권9호
• /
• pp.3025-3032
• /
• 2012

Carbon microcapsules containing silicon nanoparticles (Si NPs)-carbon nanotubes (CNTs) nanocomposite (Si-CNT@C) have been fabricated by a two step polymerization method. Silicon nanoparticles-carbon nanotubes (Si-CNT) nanohybrids were prepared with a wet-type beadsmill method. A polymer, which is easily removable by a thermal treatment (intermediate polymer) was polymerized on the outer surfaces of Si-CNT nanocomposites. Subsequently, another polymer, which can be carbonized by thermal heating (carbon precursor polymer) was incorporated onto the surfaces of pre-existing polymer layer. In this way, polymer precursor spheres containing Si-CNT nanohybrids were produced using a two step polymerization. The intermediate polymer must disappear during carbonization resulting in the formation of an internal free space. The carbon precursor polymer should transform to carbon shell to encapsulate remaining Si-CNT nanocomposites. Therefore, hollow carbon microcapsules containing Si-CNT nanocomposites could be obtained (Si-CNT@C). The successful fabrication was confirmed by scanning electron microscopy (SEM) and X-ray diffraction (XRD). These final materials were employed for anode performance improvement in lithium ion battery. The cyclic performances of these Si-CNT@C microcapsules were measured with a lithium battery half cell tests.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.252-254
• /
• 2002

In this study, polyurethane acrylate macromer was synthesized and it was used in a gel polymer electrolyte, and then its electrochemical performances were evaluated. LiCoO$_2$/GPE/MCF cells were also prepared and their performances depending on discharge currents and temperatures were evaluated. ionic conductivity of the gel polymer electrolyte with PUA at room temperature and -20$^{\circ}C$ was ca. 4.5 x 10$\^$-3/ S/cm and 1.7${\times}$10$\^$-3/ S/cm, respectively. GPE was stable electrochemically up to 4.5 V vs. Li/Li$\^$+/. LiCoO$_2$/GPE/MCF cell showed a good high-rate and a low-temperature performance.

• Journal of Electrochemical Science and Technology
• /
• 제10권2호
• /
• pp.250-255
• /
• 2019

Poly(ethylene oxide) (PEO)-based solid polymer electrolytes (SPEs) show promise for improving the lithium ion battery safety. However, due to oxidation of the PEO group and corrosion of the Al current collector, PEO-based SPEs have not previously been effective for use in $LiCoO_2$ (LCO) cathode materials at room temperature. In this paper, a semi-interpenetrating polymer network (semi-IPN) PEO-based SPE was applied to examine the performance of a LCO/SPE/Li metal cell at different voltage ranges. The results indicate that the SPE can be applied to LCO-based lithium polymer batteries with high electrochemical performance. By using a carbon-coated aluminum current collector, the Al corrosion was mostly suppressed during cycling, resulting in improvement of the cell cycle stability.

• 한국전자통신학회논문지
• /
• 제18권1호
• /
• pp.195-204
• /
• 2023

드론의 배터리 시스템은 리튬이온 또는 리튬폴리머 배터리를 사용하는데, 드론 사용 후 폐기 과정에서 화재 원인은 폐기되는 배터리에서 발생하는 가연성 가스인 것으로 알려졌다. 폐기공정에 들어간 배터리는 대부분 산소가 발생했지만 미량의 가연성 가스도 발생했고, 처리에 사용된 장비에서도 다량의 염소 이온과 황산염이 검출됐다. 이를 조기에 감지하는 시스템이 구성된다면 폐기 배터리로 인한 사고 위험을 줄일 수 있을 것이다.

• 전기화학회지
• /
• 제2권1호
• /
• pp.1-4
• /
• 1999

리튬이차전지는 충방전의 반복 동안의 액체전해질과 리튬음극과의 반응으로 수지상결정의 성장으로 리튬이 차전지에 있어서 안전성의 문제를 일으킨다. 고분자 전해질은 수지상 결정 형성을 억제하며 전해질에 성능을 향상시키는 연구가 활발히 진행중이다. 본 연구에서는 겔 전해질에 $Al_2O_3$를 첨가하여 전해질의 표면구조와 임피던스 특성을 조사하였다. 리튬이온의 수율은 $10wt\%\;PAN-Al_2O_3$ 전해질에 5mV의 전압을 인가했을 때 0.29였고 전해질의 이온전도도는 상온에서$2.3\times10^{-4} S/cm$였다. 무기 충진제가 고분자 전해질에 첨가되었을 때 이온전도도 및 이온수율은 무기 충진제가 첨가되지 않은 것보다 높게 나타났다.

• 한국고분자학회지:고분자과학과기술
• /
• 제9권2호
• /
• pp.117-124
• /
• 1998

• 폴리머
• /
• 제34권5호
• /
• pp.430-433
• /
• 2010

리튬이온 전지에 사용되는 가스켓 재료는 내전해액성, 전기절연성, 압축 영구 줄음률, 비오염성, 저온성이 요구된다. 가스켓 고무에 적용되는 충전제의 특성을 살펴보기 위하여 EPDM(ethylene propylene diene monomer), NBR(nitrile butadiene), FKM(fluoro elastomers)에 카본블랙 및 실리카계 충전제의 함량을 조정하여 compoud를 만들었다. 이렇게 배합된 compound를 리튬이온 전지의 작동 환경을 고려하여 전해액에 대한 장기평가 및 압축 영구 줄음률, 저온성에 대한 평가를 실시하였다. 본 실험에서는 카본블랙 및 실리카계 충전제를 사용하여 각 충전제에 따른 고무재료의 물리적 화학적 특성에 대하여 검토하였다.