• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.6
• /
• pp.649-656
• /
• 2011

A model for the numerical simulation of lithium-ion batteries (LIBs) is developed for use in battery cell design, with a view to improving the performances of such batteries. The model uses Newman-type electrochemical and transfer $theories^{(1,2)}$ to describe the behavior of the lithium-ion cell, together with the Levenberg-Marquardt optimization scheme to estimate the performance or design parameters in nonlinear problems. The mathematical model can provide an insight into the mechanism of LIB behavior during the charging/discharging process, and can therefore help to predict cell performance. Furthermore, by means of least-squares fitting to experimental discharge curves measured at room temperature, we were able to obtain the values of transport and kinetic parameters that are usually difficult to measure. By comparing the calculated data with the life-test discharge curves (SB LiMotive cell), we found that the capacity fade is strongly dependent on the decrease in the reaction area of active materials in the anode and cathode, as well as on the electrolyte diffusivity.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.2
• /
• pp.52-56
• /
• 2002

Tin oxide was coated on graphite particle by sol-gel method and an electrode with this material having microcrystalline structure for lithium ion battery was obtained by heat treatment in the range $400-600^{\circ}C$. The content of tin oxide was controlled within the range of $2.25wt\%\~11.1wt\%$. The discharge capacity increased with the content of tin oxide and also initial irreversible capacity increased. The discharge capacity of tin oxide electrode showed more than 350 mAh/g at the initial cycle and 300 mAh/g after the 30th cycle in propylene carbonate(PC) based electrolyte whereas graphite electrode without surface modification showed 140 mAh/g. When the charge and discharge rate was changed from C/5 to C/2, The discharge capacity of tin oxide and graphite electrode showed $92\%\;and\;77\%$ of initial capacity, respectively. It has been considered that such an enhancement of electrode characteristics was caused because lithium $oxide(Li_2O)$ passive film formed from the reaction between tin oxide and lithium ion prevented the exfoliation of graphite electrode and also reduced tin enhanced the electrical conduction between graphite particles to improve the current distribution of electrode.

• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.131-136
• /
• 2008

Silica- or titania-filled poly (vinylidene fluoride-co-hexafluoropropylene)-based polymer electrolytes were prepared by phase inversion technique using N-methyl-2-pyrrolidone and dimethyl acetamide as solvent and water as non-solvent. The polymer electrolytes were adopted to the lithium metal polymer battery using high-capacity cathode $Li[Ni_{0.15}Co_{0.10}Li_{0.20}Mn_{0.55}]O_2$ and lithium metal anode. After the repeated charge-discharge test for the cell, it was proved that the cell adopting the polymer electrolyte based on the phase-inversion membrane containing 40~50 wt% silica showed the highest discharge capacity (180 mAh/g) until 80th cycle and then abrupt capacity fade was just followed. The capacity fade might be due to the deposition of lithium dendrite on the polymer electrolyte, in which the capacity retention was no longer sustainable.

• Journal of the Korean Electrochemical Society
• /
• v.18 no.4
• /
• pp.161-171
• /
• 2015

High-yield zinc germanium oxide ($Zn_2GeO_4$) and zinc tin oxide ($Zn_2SnO_4$) nanowires were synthesized using a hydrothermal method. We investigated the electrochemical properties of these $Zn_2GeO_4$ and $Zn_2SnO_4$ nanowires as anode materials of lithium ion battery and sodium ion battery. The $Zn_2GeO_4$ and $Zn_2SnO_4$ nanowires showed excellent cycling performance of the lithium ion battery, with a maximum capacity of 1021 mAh/g and 692 mAh/g after 50 cycles, respectively, with a high Coulomb efficiency of 98 %. For the first time, we examined the cycling performance of $Zn_2GeO_4$ and $Zn_2SnO_4$ nanowires for sodium ion batteries. The maximum capacity is 168 mAh/g and 200 mAh/g after 50 cycles, respectively, with a high Coulomb efficiency of 97%. These nanowires are expected as promising electrode materials for the development of high-performance lithium ion batteries as well as sodium ion batteries.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.608-612
• /
• 2012

We investigated the cycling behavior of $Li_4Ti_5O_{12}$ electrode in a cross-linked gel polymer electrolyte based on non-flammable ionic liquid consisting of 1-butyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl) imide and vinylene carbonate. The $Li_4Ti_5O_{12}$ electrodes in ionic liquid-based gel polymer electrolytes exhibited reversible cycling behavior with good capacity retention. Cycling data and electrochemical impedance spectroscopy analyses revealed that the optimum content of the cross-linking agent necessary to ensure both acceptable initial discharge capacity and good capacity retention was about 8 wt %.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.498-501
• /
• 2001

Blanking is one of the most frequently used processes in sheet metal forming. In this paper, attention is paid to the blanking simulation of aluminium foil with $20{\mu}m$ thickness which is used an anode in lithium-ion polymer battery. In order to study the shearing mechanism for the metallic foil, finite element analysis with Crockroft and Latham fracture criterion was performed. The objective of the present work is to evolve a methodology to obtain the optimum punch-die clearance for a given aluminium foil by the simulation of the blanking process using a general purpose FEM code.

• Journal of the Korean Ceramic Society
• /
• v.38 no.3
• /
• pp.293-299
• /
• 2001

이중층 탄소재료가 콜타르핏치와 메조페이스 핏치, 인조흑연, 천연흑연과 코크스를 사용하여 제조되었다. 콜타르 핏치는 톨루엔이나 경유와 같은 유기용매에 용해되어 코팅재로 사용되었다. 메조페이스 핏치, 인조흑연, 천연흑연 및 코크에 대한 콜타르 핏치의 코팅은 X선 회절분석과 CHN 분석을 통해 확인하였다. 코팅된 탄소재료를 질소분위기의 800-100$0^{\circ}C$에서 열처리한 후 리튬이온 전지의 음극으로 사용하기 위하여 2$600^{\circ}C$에서 열처리하였다. 이중층 탄소재료의 성능평가는 동전형태의 반쪽전지를 통해 수행되었는데, 평가는 음극으로서의 충전과 방전을 통해 수행되었다. 이런 충.방전 능력은 탄소재료의 열처리 온도의 변화나 전구체의 종류에 따라 달리 나타났지만 코팅방법의 차이에 의해서는 큰 차이가 없었다. 열처리를 80$0^{\circ}C$에서 한 경우가 100$0^{\circ}C$에서 한 경우보다 높은 충.방전 능력을 나타내었고, 2$600^{\circ}C$에서 흑연화된 것보다 탄화된 재료들이 높은 충.방전 능력을 나타내었다. 결론적으로, 음극재료의 성능은 결정화도, 조성 및 탄소재료의 미세구조에 따라 달라짐을 알 수 있었다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.146-146
• /
• 2017

산화비스무트는 리튬이온과의 반응에서 현재 상용화된 그래파이트보다 높은 이론용량을 가지고 있으나, 리튬이온과의 반응에서 비교적 큰 부피팽창 특성을 가져 리튬이차전지의 음극재로서 상용화가 어려운 단점이 있다. 본 연구에서는, 이러한 문제점을 개선하기 위하여 양극산화법을 통해 충 방전시 부피팽창 변화가 매우 적은 타이타니아 나노튜브를 제조한 후, 그 위에 스프레이 방법으로 산화비스무트를 코팅하여 두 물질의 복함체를 만듦으로써 용량과 구조적 안정성을 향상시키는 방법을 소개한다. 음극재의 구조적 특성은 고분해능 주사전자현미경 (HR-SEM), 고분해능 엑스선 회절분석기(XRD)를 통해 조사하였으며, 전기화학 임피던스 분광법 (EIS), 순환전류법 (CV), 충 방전 싸이클 분석을 통해 리튬이차전지의 작동원리와 보다 향상된 성능을 규명하였다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.71.2-71.2
• /
• 2012

There are rising demands for developing more efficient energy materials to stem the depletion of fossil fuels, which have prompted significant research efforts on proton exchange fuel cells (PEFCs) and lithium ion batteries (LIBs). To date, both PEFCs and LIBs are being widely developed to power small electronics, however, their utilization to medium-large sized electric power resources such as vehicle and stationary energy storage systems still appears distant. These technologies increasingly rely upon polymer electrolyte membranes (PEMs) that transport ions from the anode to the cathode to balance the flow of electrons in an external circuit, and therefore play a central role in determining the efficiency of the devices; as ion transport is a kinetic bottleneck compared to electrical conductivity, enormous efforts have been devoted to improving the transport properties of PEMs. In present study, we carried out an in-depth analysis of the morphology effects on transport properties of PEMs. How parameters such as self-assembled nanostructures, domain sizes, and domain orientations affect conductivities of PEMs will be presented.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1597-1599
• /
• 1997

Disordered carbon materials for anode of lithium rechargeable batteries were showed much larger reversible capacity than graphite. In this paper, we studied the electrochemical characteristics of PPP-based carbon, one of the disordered carbon, as adding with different amount of graphite. PPP-based carbon with 30wt% of graphite showed large reversible capacity, ${\sim}286mAh/g$, irreversible capacity ${\sim}299mAh/g$, and small hysteresis between discharge and charge in carbon/Li cell.