• 한국수소및신에너지학회논문집
• /
• 제26권1호
• /
• pp.54-63
• /
• 2015

The secondary battery using sodium is investigating as one of power storage system and power in electric vehicles. The secondary battery using sodium as a sodium battery and sodium ion battery had merits such as a abundant resources, high energy density and safety. Sodium battery (sodium molten salt battery) is operated at lower temperature ($100^{\circ}C$) compared to NAS and ZEBRA battery ($300{\sim}350^{\circ}C$). Sodium ion battery is investigating as one of the post lithium ion battery. In this paper, it is explained for the principle and recent research trends in sodium molten salt and sodium ion battery.

• Journal of Electrochemical Science and Technology
• /
• 제6권1호
• /
• pp.1-6
• /
• 2015

With increasing interest in flexible electronic devices and wearable appliances, flexible lithium ion batteries are the most attractive candidates for flexible energy sources. During the last decade, many different kinds of flexible batteries have been reported. Although research of flexible lithium ion batteries is in its earlier stages, we have found that developing components that satisfy performance conditions under external deformation stress is a critical key to the success of flexible energy sources. Among the major components of the lithium ion battery, electrodes, which are connected to the current collectors, are gaining the most attention owing to their rigid and brittle character. In this mini review, we discuss candidate materials for current collectors and the previous strategies implemented for flexible electrode fabrication.

• 공업화학
• /
• 제9권7호
• /
• pp.1065-1069
• /
• 1998

리튬이온 이차전지에 사용되는 탄소부극의 성능을 향상시키기 위하여 결정성계 탄소재료와 비결정성계 탄소재료의 혼합비율에 따른 조합형 탄소전극을 제조하였으며, 이들의 전기화학적 특성과 충방전 특성을 조사하여 조합비율에 따른 리튬의 삽입과 탈삽입 반응기구 및 최적의 조합조건을 찾고자 하였다. 탄소전극은 결정성계 탄소재료인 natural graphite와 $700^{\circ}C$에서 1시간 동안 열처리된 비결정성계 탄소재료인 petroleum cokes를 사용하였다. 조합비에 따라 제조된 조합형 탄소전극은 두 가지 형태의 탄소재료가 갖는 전극특성을 지니며 50:50wt%로 조합하였을 때 가장 우수한 전기화학적 특성과 충 방전 특성을 나타냈다.

• 한국응용과학기술학회지
• /
• 제22권2호
• /
• pp.142-150
• /
• 2005

The natural graphite particles A and heat-treated graphite particles B at $1800\;^{\circ}C$ after pitch-coating were used as the anode base materials for lithium ion secondary battery. In order to improve the performance of anode materials, the base anode materials were treated with various acids. With the acid treatments of 62% $HNO_3$ and 95% $H_2SO_4$ aqueous solution, the specific surface area and electrical conductivity of base anode materials were increased, and the initial charge-discharge capacity and cycle performance were improved due to the elimination of structural defects.

• Carbon letters
• /
• 제12권4호
• /
• pp.243-248
• /
• 2011

Two different types of graphite, such as flake graphite (FG) and spherical graphite (SG), were used as anode materials for a lithium-ion secondary battery in order to investigate their electrochemical performance. The FG particles were prepared by pulverizing natural graphite with a planetary mill. The SG particles were treated by immersing them in acid solutions or mixing them with various carbon additives. With a longer milling time, the particle size of the FG decreased. Since smaller particles allow more exposure of the edge planes toward the electrolyte, it could be possible for the FG anodes with longer milling time to deliver high reversible capacity; however, their initial efficiency was found to have decreased. The initial efficiency of SG anodes with acid treatments was about 90%, showing an over 20% higher value than that of FG anodes. With acid treatment, the discharge rate capability and the initial efficiency improved slightly. The electrochemical properties of the SG anodes improved slightly with carbon additives such as acetylene black (AB), Super P, Ketjen black, and carbon nanotubes. Furthermore, the cyclability was much improved due to the effect of the conductive bridge made by carbon additives such as AB and Super P.

• 멤브레인
• /
• 제26권4호
• /
• pp.310-317
• /
• 2016

리튬이온 이차전지는 리튬이온이 이동하면서 전기화학적 충방전사이클을 완성하는 에너지변환장치를 의미한다. 리튬이온 이차전지는 높은 에너지밀도와 낮은 자가방전률, 상대적으로 긴 수명주기 등 다양한 장점을 갖는다. 최근 전기차 수요증가는 고용량 리튬이온 이차전지 개발을 촉진하고 있으나 음극에서의 dendrite 형성으로 인한 전기적 단락 현상과 전지 폭발 문제와 같은 심각한 안전문제를 야기한다. 또한, 리튬이온 이차전지 구동시 상승된 온도에서 폴리올레핀계열(예 : 폴리에틸렌과 폴리프로필렌) 격리막의 열수축 문제가 발생한다. 이와 같이 낮은 열 안정성은 리튬이온 이차전지의 성능과 수명의 감소로 이어진다. 본 연구에서는 폴리올레핀계열 함침격리막 제조를 위한 중요한 소재로서 술폰화 폴리아릴렌에테르술폰 랜덤 공중합체를 사용하였으며, 제조된 격리막을 이용하여 dendrite 형성과 관련된 금속이온 흡착 능력과 리튬이온전도성, 열적 내구성이 평가되었다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 추계학술대회 논문집
• /
• pp.13-15
• /
• 2008

Charging or discharging secondary batteries such as a lithium-ion battery is essential in the stage of production and takes long time over two hours. And the charge/discharge system is operated with high switching frequency over several tens kHz. Therefore, to simulate such a system in the conventional way takes very long time and huge files are produced. Finally, the simulation would be unable with general PC class. In this paper, the lithium-ion battery charge/discharge system is analyzed by using state space averaging method. As a result, the simulation time is reduced dramatically and the charge/- discharge characteristics of the lithium-ion battery can be observed.

• 전기전자학회논문지
• /
• 제24권4호
• /
• pp.1098-1103
• /
• 2020

본 논문은 리튬 이온 이차 전지의 전기적 실험 및 전기화학적 모델링을 통한 배터리 수명 상태(SOH)의 추정 방법을 다룬다. 배터리 전기적 노화 실험을 통하여 실제 배터리 수명 상태를 확인하기 위하여 전류 적산법을 사용한다. 전기적 실험에서 도출한 내부저항 값을 사용하여 SOH를 추정하며, 전기화학 모델링에서 사이클 수의 증가에 따른 SEI Layer의 변화를 통해 SOH를 추정한다. 실제 배터리 수명 상태를 포함한 세 가지 방법의 SOH 추정 방법에 가중치를 적용하여 새로운 SOH를 도출하며, 이는 전류적산법을 사용하여 구한 실제 값과의 오차를 줄여주어 추정 성능을 높인다.

• 한국입자에어로졸학회지
• /
• 제15권4호
• /
• pp.127-137
• /
• 2019

Recently, high electrochemical performance anode materials for lithium ion secondary batteries are of interest. Here, we present silicon-carbon-graphene (Si-C-GR) composites for high performance anode materials of lithium ion secondary battery (LIB). Aerosol process and heat-treatment were employed to prepare the Si-C-GR composites using a colloidal mixture of silicon, glucose, and graphene oxide precursor. The effects of the size of the silicon particles in Si-C-GR composites on the material properties including the morphology and crystal structure were investigated. Silicon particles ranged from 50 nm to 1 ㎛ in average diameter were employed while concentration of silicon, graphene oxide and glucose was fixed in the aerosol precursor. Morphology of as-fabricated Si-C-GR composites was generally the shape of a crumpled paper ball and the Si particles were well wrapped in carbon and graphene. The size range of composites was about from 2.2 to 2.9 ㎛. The composites including silicon particles larger than 200 nm in size exhibited higher performance as LIB anodes such as capacity and coulombic efficiency than silicon particles less than 100 nm, which were about 1500 mAh/g at 100 cycles in capacity and 99% in coulombic efficiency, respectively.

• 한국고분자학회지:고분자과학과기술
• /
• 제9권2호
• /
• pp.117-124
• /
• 1998