• 전기전자학회논문지
• /
• 제24권4호
• /
• pp.1098-1103
• /
• 2020

본 논문은 리튬 이온 이차 전지의 전기적 실험 및 전기화학적 모델링을 통한 배터리 수명 상태(SOH)의 추정 방법을 다룬다. 배터리 전기적 노화 실험을 통하여 실제 배터리 수명 상태를 확인하기 위하여 전류 적산법을 사용한다. 전기적 실험에서 도출한 내부저항 값을 사용하여 SOH를 추정하며, 전기화학 모델링에서 사이클 수의 증가에 따른 SEI Layer의 변화를 통해 SOH를 추정한다. 실제 배터리 수명 상태를 포함한 세 가지 방법의 SOH 추정 방법에 가중치를 적용하여 새로운 SOH를 도출하며, 이는 전류적산법을 사용하여 구한 실제 값과의 오차를 줄여주어 추정 성능을 높인다.

• Bulletin of the Korean Chemical Society
• /
• 제32권10호
• /
• pp.3682-3686
• /
• 2011

The electrochemical properties of lithium-sulfur batteries with binary electrolytes based on DME and DOL, TEGDME and DOL mixed solvent containing $LiClO_4$, LiTFSI, and LiTF salts were investigated. The ionic conductivity of 1M LiTFSI and $LiClO_4$ electrolytes based on TEGDME and DOL increased as the volume ratio of DOL solvent increased, because DOL effectively reduces the viscosity of the above electrolytes medium under the same salts concentration. The first discharge capacity of lithium-sulfur batteries in the DME and DOL-based electrolyte followed this order: LiTFSI (1,000 mAh/g) > LiTF (850 mAh/g) > $LiClO_4$ (750 mAh/g). In case of the electrolyte based on TEGDME and DOL, the first discharge capacity of batteries followed this order: $LiClO_4$ (1,030 mAh/g) > LiTF (770 mAh/g) > LiTFSI (750 mAh/g). The cyclic efficiency of lithium-sulfur batteries at 1M $LiClO_4$ electrolytes is higher than that of batteries at other lithium salts-based electrolytes. Lithium-sulfur battery showed discharge capacity of 550 mAh/g until 20 cycles at all electrolytes based on DME and DOL solvent. By contrast, the discharge capacity of batteries was about 450 mAh/g at 1M LiTFSI and LiTF electrolytes based on TEGDME and DOL solvent after 20 cycles.

• 전자통신동향분석
• /
• 제38권6호
• /
• pp.128-136
• /
• 2023

Lithium accounts for only 0.0017% of the earth crust, and it is produced in geographically limited regions such as South America, the United States, and China. Since the first half of 2017, the price of lithium has been continuously increasing, and with the rapid adoption of electric vehicles, lithium resources are expected to be depleted in the near future. In addition, economic blocs worldwide face intensifying scenarios such as competition for technological supremacy and protectionism of domestic industries. Consequently, Korea is deepening its dependence on China for core materials and is vulnerable to the influence of the United States Inflation Reduction Act. We analyze post-lithium secondary battery technologies that rely on more earth-abundant elements to replace lithium, whose production is limited to specific regions. Specifically, we focus on the technological status and issues of sodium-ion, zinc-air, and redox-flow batteries. In addition, research trends in post-lithium secondary batteries are examined. Post-lithium secondary batteries seem promising for large-capacity energy storage systems while reducing the costs of raw materials compared with existing lithium-based technologies.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 전력전자학술대회
• /
• pp.459-460
• /
• 2019

The performance dynamics of battery is very sensitive to operating conditions (i.e temperature, load current, and state of charge). A model developed based on certain conditions may perform well under the similar conditions but can not accurately predict the performance for changing conditions. Thus, a generalized model is needed which can accurately emulate the battery dynamic behavior under all conditions. In addition, the components of the model should relate to the physicochemical processes that occur inside the battery. Electrochemical impedance curve shows better visible reflection of the processes inside battery as compared to voltage curve. The model trained for parameterization using neural network has better generalization than simple curve fitting. Thus, this study proposes recurrent neural network based parameterization of the Lithium ion battery model followed by impedance based identification.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2002년도 춘계총회 및 학술발표회
• /
• pp.16-17
• /
• 2002

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 추계학술대회 논문집
• /
• pp.70-71
• /
• 2014

In this paper, an advanced charging strategy for improving the charging performance of the Li-ion polymer battery is proposed, which is based on the battery characteristic. Simulation results show that the proposed charging current pattern can improve the charging speed of battery in comparison with the standard CC-CV (constant current - constant voltage) charging strategy and the pulse-charging strategy.

• 한국자동차공학회논문집
• /
• 제22권3호
• /
• pp.60-67
• /
• 2014

The battery cells in lithium-ion battery pack assembled with high-capacity and high-power pouch cells, are commonly cooled with thin aluminum cooling plates in contact with the cells. For HEV/EV lithium-ion battery systems assembled with high-capacity, high-power pouch cells, the cells are commonly cooled with thin aluminum cooling plates in contact with the cells. Thin aluminum cooling plates are cooled by cold plate with coolant flow paths. In this study, the effect of the battery cooling system design including aluminum cooling plate thickness and various position of cold plate on the cooling performance are investigated by using finite element methods (FEM). Optimal cooling plate and cold plate design are proposed for improving the uniformity in temperature distributions as well as lowering average temperature for the cells with large capacities based on the simulation results.

• 전기화학회지
• /
• 제22권1호
• /
• pp.43-52
• /
• 2019

리튬이차전지(Lithium Secondary Batteries)를 에너지원으로 채용하는 분야가 다양해짐에 따라, 기존 요구 특성뿐만 아니라 각 분야에 특화된 성능 평가 결과까지 요구하고 있다. 이에 대응하기 위해 각 전지 제조사는 연구 인력을 충원하고 고가의 장비를 지속적으로 도입해서 다수의 전지를 오랜 기간 평가해야 하는 어려움을 겪고 있다. 이를 해소하기 위해, 전지 모델링(Modeling)을 기반으로 한 모사(Simulation) 기법을 도입하여, 실험 횟수를 최소화하고 실험 시간도 단축하려는 시도를 지속하고 있다. 현재까지 다양한 리튬이차전지 모델링 기법이 보고되고 있으며, 목적에 따라 최적 기법이 선택 및 활용되어 왔다. 본 리뷰 논문에서는 뉴만(Newman) 모델을 기반으로 한 전기화학적 모델링(Electrochemical Modeling) 기법을 상세히 설명한다. 특히, 전극 반응속도를 나타내는 버틀러-볼머식(Butler-Volmer Equation), 각 상(Phase)에서 전자와 이온의 균형 방정식 (Material and Charge Balance Equations), 그리고 전지의 온도 변화를 설명할 수 있는 에너지 균형 방정식 (Energy Balance Equation)의 물리적 의미를 쉽게 설명하고, COMSOL Multiphysics를 이용한 간단한 해석 과정과 결과를 제시한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.340-341
• /
• 2005

Lithium titanium oxide as anode material for energy storage prepared by novel synthesis method. $Li_4Ti_5O_{12}$ based spinel-framework structures are of great interest material for lithium-ion batteries. We describe here $Li_4Ti_5O_{12}$ a zero-strain insertion material was prepared by novel sol-gel method and by high energy ball milling (HEBM) of precursor to from nanocrystalline phases. According to the X-ray diffraction and scanning electron microscopy analysis, uniformly distributed $Li_4Ti_5O_{12}$ particles with grain sizes of 100nm were synthesized. Lithium cells, consisting of $Li_4Ti_5O_{12}$ anode and lithium cathode showed the 173 mAh/g in the range of 1.0 $\sim$ 3.0 V. Furthermore, the crystalline structure of $Li_4Ti_5O_{12}$ didn't transfer during the lithium intercalation and deintercalation process.

• Journal of Electrochemical Science and Technology
• /
• 제4권1호
• /
• pp.27-33
• /
• 2013

The consequences of electrode density and thickness for electrochemical performance of lithium-ion cells are investigated using 2032-type coin half cells. While the cathode composition is maintained by 90:5:5 (wt.%) with $LiCoO_2$ active material, Super-P electric conductor and polyvinylidene fluoride polymeric binder, its density and thickness are independently controlled to 20, 35, 50 um and 1.5, 2.0, 2.5, 3.0, 3.5 g $cm^{-3}$, respectively, which are based on commercial lithium-ion battery cathode system. As the cathode thickness is increased in all densities, the rate capability and cycle life of lithium-ion cells become significantly worse. On the other hand, even though the cathode density shows similar behavior, its effect is not as high as the thickness in our experimental range. This trend is also investigated by cross-sectional morphology, porosity and electric conductivity of cathodes with different densities and thicknesses. This work suggests that the electrode density and thickness should be chosen properly and mentioned in detail in any kinds of research works.