• Journal of Korean Society of Forest Science
• /
• v.94 no.1 s.158
• /
• pp.39-44
• /
• 2005

An effective micropropagation system for Liriodendron tulipifera L via somatic embryogenesis was established using immature seeds. Immature seeds from five individual trees were bisected longitudinally and cultured on two basal media (MS and B5) containing different combinations of 2,4-D and TDZ to induce callus and embryogenic tissue under light ($40{\mu}mol\;m^{-2}s^{-1}$, 16 hr/day) or complete darkness at $25{\pm}2^{\circ}C$. There was no distinctive difference on callus and embryogenic tissue induction between the two basal media with PGRs. Optimum culture medium appeared to be MS medium supplemented with 1.0mg/L 2,4-D and 0.01mg/L TDZ plus 3% sucrose. Nonembryogenic callus induction rate was not significantly different among the genotypes. However, However, the embryogenic callus induction frequency differed greatly by the genotypes ranging from 55% to 72% when cultured in the dark. Generally, the cultures maintained in the dark tended to show normal somatic embryo development as well as embryogenic tissue formation and this was confirmed by histological examination. Above results suggest that a proper selection of mother tree and dark culture condition are necessary to optimize somatic embryogenesis system of Liriodendron tulipifera.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.4
• /
• pp.16-20
• /
• 2013

Yellow poplar grown in Korea and imported eucalyptus were compared their kraft pulping characteristics and evaluated the replacing possibility of eucalyptus by yellow poplar. Difference between yellow poplar and eucalyptus were investigated in chemical composition and fiber morphology. Yellow poplar kraft pulp resulted in the higher yield, longer fiber length and thicker fiber, and higher pulp strength than that of eucalyptus. More xylan survived in eucalyptus than yellow poplar during kraft pulping, which led to similar pulp yield even though polysaccharides in Eucalyptus was 4.5% less than in yellow poplar. Longer and thicker yellow poplar pulp fiber resulted in better beating response and pulp strength properties.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.11
• /
• pp.1819-1825
• /
• 2008

Degradation and glucose production from wood chips of white pine (Pinus strobus) and tulip tree (Liriodendron tulipifera) by several white rot fungi were investigated. The highest weight losses from 4 g of wood chips of P. strobus and L. tulipifera by the fungal degradation on yeast extract-malt extract-glucose agar medium were 38% of Irpex lacteus and 93.7% of Trametes versicolor MrP 1 after 90 days, respectively. When 4 g of wood chips of P. strobus and L. tulipifera biodegraded for 30 days were treated with cellulase, glucose was recovered at the highest values of 106 mg/g degraded wood by I. lacteus and 450 mg/g degraded wood by T. versicolor. The weight loss of 10 g of wood chip of L. tulipifera by T. versicolor on the nutrient non-added agar under the nonsterile conditions was 35% during 7 weeks of incubation, and the cumulative amount of glucose produced during this period was 239 mg without cellulase treatment. The activities of ligninolytic enzymes (lignin peroxidase, manganese peroxidase, and laccase) of fungi tested did not show a high correlation with degradation of the wood chips and subsequent glucose formation. These results suggest that the selection of proper wood species and fungal strain and optimization of glucose recovery are all necessary for the fungal pretreatment of woody biomass as a carbon substrate.

• Journal of Plant Biotechnology
• /
• v.30 no.4
• /
• pp.359-363
• /
• 2003

Mass propagation of tulip tree (Liriodendron tulipifera L) via somatic embryogenesis was successfully achieved with immature samaras collected from adult trees. Embryogenic tissues were induced by culturing them samaras on 1/2 LM medium (Litvay's) containing 2,4-D and BA. Somatic embryos developed from the embryogenic tissues and germinated to normal plants (emblings) upon transfer onto the same medium containing either AgNO$_3$ or activated charcoal. So far, several factors appeared to influence both the induction of embryogenic tissues and germination of the embryos into plants. These include the collection time of samaras for the induction of embryogenic tissue, sucrose level in the culture medium, the level of both AgNO$_3$ and activated charcoal, and plating density of somatic embryos on germination medium for maturation and germination of somatic embryos into plantlets.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.2
• /
• pp.149-158
• /
• 2010

Organosolv pretreatments which utilized sulfuric acid, sodium hydroxide and ammonia as catalysts were conducted to screen the effective catalyst for organosolv pretreatment of Liriodendron tulipifera. The enzymatic hydrolysis was achieved effectively with sulfuric acid (74.2%) and sodium hydroxide (63.7%). They were thus considered as effective catalysts for organosolv pretreatment of L. tulipifera. The organosolv pretreatments with sulfuric acid and sodium hydroxide showed a different behavior on the reaction mechanism. The pretreatment with sulfuric acid increased the biomass roughness and pore numbers. On the other hand, the pretreatment with sodium hydroxide enhanced the surface area due to the size reduction and minor defiberization which were caused by hemicellulose degradation at an initial stage and more defiberization by lignin degradation at a later stage. The organosolv pretreatment with sodium hydroxide was performed at several different conditions to evaluate effectiveness of sodium hydroxide as a catalyst for organosolv pretreatment. According to the results of enzymatic digestibility, the changes of chemical composition and the morphological analysis of pretreated biomass, it was suggested that the pretreatment time impacted primarily on enzymatic hydrolysis. Increase in surface area during the pretreatment was a major cause for improvement in enzymatic digestibility when sodium hydroxide was used as a catalyst.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.2
• /
• pp.187-195
• /
• 2011

In this study, dilute acid pretreatment of $Liriodendron$ $tulipifera$ was performed for enzymatic hydrolysis. As the pretreatment temperature was increased, enzymatic hydrolysis and enzyme adsorption yield also increased. The highest enzymatic hydrolysis yield was 57% (g/g) and enzyme adsorption was 44% (g/g). Enzymatic hydrolysis yield was determined with weight loss of pretreated biomass by enzyme, and enzyme adsorption was a percentage of enzyme weight attaching on pretreated biomass compared with input enzyme weight. When $L.$ $tulipifera$ was pretreated with 1% sulfuric acid at $160^{\circ}C$ for 5 min., hemicellulose was significantly removed in pretreatment, but the lignin contents were constant. Other changes in surface morphology were detected on biomass pretreated at $160^{\circ}C$ by a field emission scanning electron microscope (FESEM). A large number of spherical shapes known as lignin droplets were observed over the entire biomass surface after pretreatment. Hemicellulose removal and morphological changes improved enzyme accessibility to cellulose by increasing cellulose exposure to enzyme. It is thus evidence that enzyme adsorption is a significant factor to understand pretreatment effectiveness.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.17 no.1
• /
• pp.75-84
• /
• 2015

This study was conducted to investigate the effects of high temperature and drought on growth performance, photosynthetic parameters and photosynthetic pigment contents of Liriodendron tulipifera L. seedlings. The seedlings were grown in controlled-environment growth chambers with combinations of four temperature ($-3^{\circ}C$, $0^{\circ}C$, $+3^{\circ}C$, $+6^{\circ}C$; based on the monthly average for 30 years in Korea) and two water status (control, drought). Temperature rise increased growth, total dry weight and leaf area in all water status. Also photosynthetic rate, dark respiration, stomatal conductance and transpiration rate increased with increasing temperature. In contrast, growth and photosynthetic parameters of L. tulipifera seedlings were lower in $-3^{\circ}C$ than $0^{\circ}C$. But temperature rise decreased water use efficiency in all water status. Temperature rise increased photosynthetic pigment contents of leaf. Also chlorophyll a/b ratio increased with increasing temperature. In conclusion, the elevated temperature lead to causes growth increase through the increase of energy production by higher photosynthetic rate during a growth period of L. tulipifera seedlings.

• Korean Journal of Agricultural Science
• /
• v.50 no.2
• /
• pp.181-192
• /
• 2023

Appropriate fertilization methods are required according to species to supply necessary nutrients to plants and prevent soil environmental contamination in nurseries. In this study, the effects of nitrogen and phosphorus fertilization on the growth of Liriodendron tulipifera and soil characteristics were investigated. After 16 fertilization treatments (4 levels of nitrogen × 4 levels of phosphorus) were applied to one-year-old L. tulipifera seedlings at the Yongmun Nursery Station of the Korea Forest Service, height, root collar diameter (RCD), biomass, leaf nutrients, and soil characteristics were investigated. The height increased as the amount of nitrogen and phosphorus fertilization increased, and the RCD was the highest in the ×2 treatment. Biomass growth was on average 40.0% higher for the treatment with high nitrogen fertilization compared to the low nitrogen treatment. The seedling quality index was the highest with nitrogen and phosphorus ×2 treatment. Leaf phosphorus and magnesium concentrations decreased when nitrogen fertilization was applied, and leaf potassium concentrations decreased as nitrogen fertilization increased. Soil pH and exchangeable potassium decreased as the amount of phosphorus application increased, and exchangeable magnesium decreased as the amount of nitrogen application increased and increased as the amount of phosphorus application increased. Considering the growth of L. tulipifera seedlings and changes in the soil characteristics at the nursery stage, twice the standard fertilization amount is the appropriate fertilization amount for nursery of the Yongmun Nursery Station. It is expected that this study will contribute to improving nursery soil fertilization management technology for healthy seedling production.

• Journal of Korean Society of Forest Science
• /
• v.100 no.2
• /
• pp.305-313
• /
• 2011

Fertilization is essential to seedling production in nursery culture, but excessive fertilization can contaminate surface and ground water around the nursery. The objective of this study was to find optimal fertilization practice of container seedling production for reducing soil and water contamination around the nursery without compromising seedling quality. This study was conducted to investigate growth performance, photosynthesis, chlorophyll fluorescence, and chlorophyll contents of Liriodendron tulipifera growing under three different fertilization treatments (Constant rate, Three-stage rate, and Exponential rate fertilization). Root collar diameter, height, and biomass of L. tulipifera were the highest at Constant treatment. Like growth performance, seedling quality index (SQI) were higher at Constant than at other treatments, but not significantly different among treatments. L. tulipifera showed good photosynthetic capacity at all treatments. Photochemical efficiency and chlorophyll contents were significantly lower at Exponential than at other treatments. Therefore, Exponential fertilization which is 50% fertilizer of other treatments would maximize seedling growth and minimize nutrient loss.

• Journal of the Korea Furniture Society
• /
• v.24 no.4
• /
• pp.345-349
• /
• 2013

Yellow poplar is well known commercial hardwood species in the world because of its availability, rapid growth, large size, excellent form, early natural pruning, and the good working quality of the wood. Therefore, yellow poplar (Liriodendron tulipifera L.) has been adopted in South Korea for decades ago, and its cultivating the saplings and silvicultural system have been studied. However, yellow poplar is still embroiled in controversy for utilization of use and worth. This species has not only advantages such as lower weight, light color, and higher machinability and bending processing, but also has disadvantages which are bad smell and different colors on heartwood and sapwood. In this study, the objective was that use of yellow poplar board as furniture materials by drying and painting process. Thirty years old yellow poplar was cut and dried for 7 days by high-frequency dryness. Adjustment of color tone to walnut color was conducted with multiple colorants and various number of spread times. Uniform color of yellow poplar on heartwood and sapwood was accomplished by applying 1 time stain (green), 2 times transparent primer, 1 time middle-painting (walnut), and 2 times top-painting (walnut) in sequentially. The painted yellow poplar board was used to manufacture table and dressing table. During the furniture manufacture process, no critical issues were occurred on part of jointing and painting. This painting method may be useful data for future use of yellow poplar as furniture materials.