• Journal of Life Science
• /
• v.26 no.12
• /
• pp.1392-1399
• /
• 2016

Jaspine B is an anhydrophytosphingosine that is isolated from a marine sponge. Because of its structural similarity to sphingosine, it shows anti-cancer effects in human carcinomas. Therefore, this study aims to investigate its anti-proliferative effect on various cancer cells and to correlate its association with the intracellular accumulation of Jaspine B in relevant cancer cells. The anti-proliferative effect of Jaspine B in various cancer cells was determined by a cell viability test, and the intracellular concentration of Jaspine B in relevant cancer cells was determined using mass spectrometry coupled with liquid chromatography. The correlation coefficient and p value between the cytotoxicity and the cell accumulation of Jaspine B were determined using SPSS 16.1. The cytotoxicity of Jaspine B varied depending on the type of cancer cell when compared the $EC_{50}$ values of Jaspine B. Breast and melanoma cancer cells were susceptible to Jaspine B, whereas renal carcinoma cells were resistant. The intracellular concentrations of Jaspine B had a reciprocal correlation with the $EC_{50}$ values in the same cells (r = 0.838). The results suggested that the anti-proliferative effect of Jaspine B was associated with the cellular accumulation of this compound. However, Jaspine B was not a substrate for P-glycoprotein and breast cancer resistance protein, as major efflux pumps caused multidrug resistance. The maintenance of a high intracellular concentration is crucial for the cytotoxic effect of Jaspine B; however, efflux pumps may not be a controlling factor for Jaspine B-related resistance in cancer cells.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.146-147
• /
• 2011

Processing a large area substrate for liquid crystal display (LCD) or solar panel applications in a capacitively coupled plasma (CCP) reactor is becoming increasingly challenging because of the size of the substrate size is no longer negligible compared to the wavelength of the applied radio frequency (RF) power. The situation is even worse when the driving frequency is increased to the Very High Frequency (VHF) range. When the substrate size is still smaller than 1/8 of the wavelength, one can obtain reasonably uniform process results by utilizing with methods such as tailoring the precursor gas distribution by adjustingthrough shower head hole distribution or hole size modification, locally adjusting the distance between the substrate and the electrode, and shaping shower head holes to modulate the hollow cathode effect modifying theand plasma density distribution by shaping shower head holes to adjust the follow cathode effect. At higher frequencies, such as 40 MHz for Gen 8.5 (2.2 m${\times}$2.6 m substrate), these methods are not effective, because the substrate is large enough that first node of the standing wave appears within the substrate. In such a case, the plasma discharge cannot be sustained at the node and results in an extremely non-uniform process. At Applied Materials, we have studied several methods of modifying the standing wave pattern to adjusting improve process non-uniformity for a Gen 8.5 size CCP reactor operating in the VHF range. First, we used magnetic materials (ferrite) to modify wave propagation. We placed ferrite blocks along two opposing edges of the powered electrode. This changes the boundary condition for electro-magnetic waves, and as a result, the standing wave pattern is significantly stretched towards the ferrite lined edges. In conjunction with a phase modulation technique, we have seen improvement in process uniformity. Another method involves feeding 40 MHz from four feed points near the four corners of the electrode. The phase between each feed points are dynamically adjusted to modify the resulting interference pattern, which in turn modulate the plasma distribution in time and affect the process uniformity. We achieved process uniformity of <20% with this method. A third method involves using two frequencies. In this case 40 MHz is used in a supplementary manner to improve the performance of 13 MHz process. Even at 13 MHz, the RF electric field falls off around the corners and edges on a Gen 8.5 substrate. Although, the conventional methods mentioned above improve the uniformity, they have limitations, and they cannot compensate especially as the applied power is increased, which causes the wavelength becomes shorter. 40 MHz is used to overcome such limitations. 13 MHz is applied at the center, and 40 MHz at the four corners. By modulating the interference between the signals from the four feed points, we found that 40 MHz power is preferentially channeled towards the edges and corners. We will discuss an innovative method of controlling 40 MHz to achieve this effect.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.4
• /
• pp.249-255
• /
• 2017

BACKGROUND: Globally, mulberry (Morus sp.) is exploited for feeding leaf to silkworms in order to obtain silk fiber or for animal feedstock production. Also, mulberry fruit is known to a by-product that was produced from mulberry tree after harvesting leaves for silkworm rearing, as a yield and consumption of mulberry fruit was increased, it has been fixing to a newincome crop. Mulberry leaves and fruits are used for the health benefits of human beings. Mulberry contains various bioactive components, such as alkaloids and flavonoids. Mulberry flavonoids are an important part of the diet because of their effects on human nutrition. The flavonoids in mulberry leaf and fruit of 'Suhyang'(Morus alba L.) were determined. METHODS AND RESULTS: Flavonoids for mulberry leaf and fruit of 'Suhyang' were analysed using ultrahigh performance liquid chromatography coupled with diode array detection and quadrupole time-of-flight mass spectrometry (UPLC-DAD-QTOF/MS)technique. An UPLC-DAD-QTOF/MS system was used, and identification of mulberry leaves constituents was carried out on the basis of the complementary information obtained from LC spectra, MS ions, and MS/MS fragments. The mulberry leaf (16 flavonoids) and fruit (9 flavonoids) were isolated and analyzed from Suhyang using UPLC-DAD-QTOF/MS chromatogram. To the best of our knowledge, Quercetin 3-O-(6"-O-malonyl) glucoside and quercetin 3-O-rutinoside (rutin) was detected on the highest content in leaf and fruit, respectively and further research will be devoted to evaluate their biological activity. CONCLUSION: Obtaining information about the concentration of functional materials in mulberry leaves could contribute to the development and promotion of processed, functional products and offer possible industrial use of 'Suhyang', holding promises to enhance the overall profitability of sericulture.

• Journal of Food Hygiene and Safety
• /
• v.27 no.1
• /
• pp.37-41
• /
• 2012

The current standard for testing tetrodotoxin (TTX) in foodstuffs is the mouse bioassay (MBA) in Korea as in many other countries. However, this test suffers from potential ethical concerns over the use of live animals. In addition, the mouse bioassay does not test for a specific toxin thus a sample resulting in mouse incapacitation would need further confirmatory testing to determine the exact source toxin (e.g., TTX, STX, brevotoxin, etc.). Furthermore, though the time of death is proportional to toxicity in this assay, the dynamic range for this proportional relationship is small thus many samples must be diluted and new mice be injected to yield a result that falls within the quantitative dynamic range. Therefore, in recent years, there have been many efforts in this field to develop alternative assays. High performance liquid chromatography (HPLC) coupled with mass spectrometry (MS) has been emerged as one of the most promising options. A LC-MS-MS method involves solid-phase extraction (SPE) and followed by analysis using an electrospray in the positive ionization mode and multiple reactions monitoring (MRM). To adopt LC-MS-MS method as alternative standard for testing TTX, we performed a validation study for the quantification of TTX in puffer fish. This LC-MS-MS method showed good sensitivity as limits of detection (LOD) of $0.03{\sim}0.08{\mu}g/g$ and limits of quantification (LOQ) of $0.10{\sim}0.25{\mu}g/g$. The linearity ($r^2$) of tetrodotoxin were 0.9986~0.9997, the recovery were 80.9~103.0% and the relative standard deviations (RSD) were 4.3~13.0%. The correlation coefficient between the mouse bioassay and LC/MS/MS method was higher than 0.95.

• Journal of Food Hygiene and Safety
• /
• v.32 no.5
• /
• pp.389-395
• /
• 2017

A simultaneous determination of 5 phenolic acids (gallic acid, chlorogenic acid, caffeic acid, pcoumaric acid, trans ferulic acid) and 9 flavonoids (procyanidin b1, aspalathin, rutin, vitexin, hyperoside, isoquercitrin, luteolin, quercetin, chrysoeriol) in rooibos tea has been carried out by ultra-high performance liquid chromatography coupled to tandem mass spectrometry (UPLC-MS/MS). A validated analysis method in this study was applied to rooibos aqueous infusions. Rooibos tea is an antioxidant-rich tea which has anti-cancer, anti-aging, anti-inflammatory, anti-diabetic effect. Extraction yield of phenolics depends on steeping time and temperature of water. Tea infusions were prepared by placing 1 g of tea leaves or 1 tea bag in 100 mL of boiled water, and then at 3, 6 and 30 minutes intervals the infused teas were taken to carry out the analysis of phenolic contents. Another tea infusion was conducted with cold water ($25-30^{\circ}C$) for 30 minuntes. As a result, the total amount of phenolics was highest in rooibos tea steeped with hot water for 30 minutes, followed by 6 minutes, 3 minutes and cold water 30minutes and the result has statistical significance.

• Korean Journal of Food Science and Technology
• /
• v.45 no.4
• /
• pp.409-415
• /
• 2013

Post-harvest fungicide residue was measured in citrus fruits. Samples were collected from local markets in Seoul and analyzed using liquid chromatography coupled with mass spectrometry (LC-MS). LC-MS results were validated for the assay of pesticides by using linearity, accuracy, precision, and limits of detection and quantification. The linearity in the concentration ranged from 0.005 to 2.0 mg/kg ($R^2$ >0.999). Sample recoveries ranged from 80.2 to 98.3% with relative standard deviations below 4.0% for spiking levels from 0.01 to 1.0 mg/kg. The limits of detection ranged between 0.002 and 0.008 mg/kg, and the limits of quantification ranged between 0.006 and 0.027 mg/kg. The highest residue levels for carbendazim, thiabendazole, imazalil, and azoxystrobin in citrus fruits were 0.541, 0.958, 0.721, and 0.052 mg/kg, respectively. The pesticide residues found in citrus fruits were blow maximum residue limits (MRLs) and are not a serious public health problem.

• Analytical Science and Technology
• /
• v.29 no.5
• /
• pp.234-241
• /
• 2016

The approach presented in this article refers to the bioanalytical method validation for the detection and quantitative determination of arsenic species including arsenite (As(III)), arsenate (As(V)), dimethylarsinic acid (DMA) and monomethylarsonic acid (MMA) in dog plasma by high-performance liquid chromatography inductively coupled plasma mass spectrometry (HPLC-ICP/MS). The arsenic species were separated using an agilent As speciation column by a mobile phase of 2 mM sodium phosphate monobasic, 0.2 mM ethylenediaminetetraacetic acid disodium salt dehydrate, 10 mM sodium acetate, 3 mM sodium nitrate and 1 % ethyl alcohol at pH 11 (adjusted with 1M NaOH). The method validation experiment was obtained selectivity, linearity, accuracy, precision, matrix effect, recovery, system suitability, dilution integrity and various stabilities. All calibration curves showed good linearity (R²>0.999) within test ranges. The lower limit of quantitation (LLOQ) was 5 ng/mL for As(III), As(V) and DMA, and 20 ng/mL for MMA. The system suitability and dilution values were within 6.5 % and 7.7 %. Subsequently, the developed and validated HPLC-ICP/MS method was also successfully applied to determine the arsenic speciation in dog plasma samples, and the recoveries for the spiked samples were in the range of 91.5–102.2 %. Therefore, this method could be applied to the evaluation of arsenic exposure, health effect assessment and other bio-monitoring studies in biological samples.

• Journal of Food Hygiene and Safety
• /
• v.33 no.5
• /
• pp.354-360
• /
• 2018

This study presents a method validation for extraction and quantitative analysis of trichothecene mycotoxins in nuts based on quick, easy, cheap, effective, rugged, and safe (QuEChERS) approach for extraction and enhanced matrix removal (EMR)-lipid-disperive-SPE (d-SPE) cleanup method, with detection and quantification by high-performance liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS) in positive- and negative-ion modes. Linearity, precision, and accuracy were validated for LC-MS/MS methods. Results obtained with LC-MS/MS were linear, with correlation coefficient ($R^2$) of 0.998. Limits of detection and quantification for mycotoxins were $0.41-3.57{\mu}g/kg$ and $1.23-10.82{\mu}g/kg$, respectively. Intra- and inter-day precisions (RSD, %) were 0.40-8.44% and 1.93-12.46%, respectively. Results indicated to be rapidly and accurately identifying trichothecene mycotoxins and may be used as a suitable safety management method for nuts and nuts related commodities.

• Korean Journal of Food Science and Technology
• /
• v.32 no.3
• /
• pp.570-577
• /
• 2000

A method was presented for determination of bisphenol F(BPF), bisphenol A(BPA), bisphenol F diglycidyl ether(BFDGE) and bisphenol A diglycidyl ether(BADGE) in 3 aqueous-based food simulants (water, 4% acetic acid, 20% ethanol) by reverse-phase high performance liquid chromatography(RP-HPLC)with fluorescence detection and gas chromatography with mass selective detection(GC/MSD). All the calibration lines in the range of $5{\sim}800\;{\mu}g/L$ had correlation coefficients greater than 0.9998 and detection limits of less than $1.2\;{\mu}g$ bisphenols/L. Precision at $200\;{\mu}g/L$ was under 3.1%. Recoveries of bisphenols simultaneously spiked to aqueous food simulants exceeded 95% for BPF and BPA but about 80% for BFDGE and BADGE. However, recoveris of BFDGE and BPADGE respectively spiked increased upto 95%. Detection limits in recovery test were less than $0.40\;{\mu}g$ bisphenols/L. In migration test bisphenols were determined by RP-HPLC coupled with confirmation by GC/MSD. Can coatings of epoxy phenol, modified epoxy, epoxy ester phenol and thermoset vinyl were exposed to the 3 aqueous food simulants. BPF, BFDGE and BADGE were not detected in all the can coatings but BPA was detected in 4% acetic acid and 20% ethanol in all the can coatings except modified epoxy.

• Genomics & Informatics
• /
• v.16 no.3
• /
• pp.52-58
• /
• 2018

In this report, we present a case study of how pharmacogenomics and pharmacometabolomics can be useful to characterize safety and pharmacokinetic profiles in early phase new drug development clinical trials. During conducting a first-in-human trial for a new molecular entity, we were able to determine the mechanism of dichotomized variability in plasma drug concentrations, which appeared closely related to adverse drug reactions (ADRs) through integrated omics analysis. The pharmacogenomics screening was performed from whole blood samples using the Affymetrix DMET (Drug-Metabolizing Enzymes and Transporters) Plus microarray, and confirmation of genetic variants was performed using real-time polymerase chain reaction. Metabolomics profiling was performed from plasma samples using liquid chromatography coupled with quadrupole time-of-flight mass spectrometry. A GSTM1 null polymorphism was identified in pharmacogenomics test and the drug concentrations was higher in GSTM1 null subjects than GSTM1 functional subjects. The apparent drug clearance was 13-fold lower in GSTM1 null subjects than GSTM1 functional subjects (p < 0.001). By metabolomics analysis, we identified that the study drug was metabolized by cysteinylglycine conjugation in GSTM functional subjects but those not in GSTM1 null subjects. The incidence rate and the severity of ADRs were higher in the GSTM1 null subjects than the GSTM1 functional subjects. Through the integrated omics analysis, we could understand the mechanism of inter-individual variability in drug exposure and in adverse response. In conclusion, integrated multi-omics analysis can be useful for elucidating the various characteristics of new drug candidates in early phase clinical trials.