• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.11
• /
• pp.1027-1033
• /
• 2010

A two-phase (gas-liquid) flow is a common phenomenon in fluidic systems, e.g., fluidic systems in the electro-magnetic or nuclear power generation industry and in the steel industry. The measurement of a two-phase flow is important for guaranteeing the safety of the system and for achieving the desired performance. The measurement of the void fraction, which is one of the parameters of the two-phase flow that determines the pressure drop and heat transfer coefficient, is very important. The time resolution achieved by employing the impedance method that can be used to calculate the void fraction from the impedance of the fluid is high because the electric characteristics are taken into account. Therefore, this method can be employed to accurately measure the void fraction without distortion of flow in real time by placing electrodes on the walls of the tubes. Coney analytically studied a ring-type impedance meter, which can be employed in a circular tube. The aim of this study is to experimentally verify the robustness of a three-ring impedance meter to variations in the electric conductivity of the fluid; this robustness was suggested by Coney but was not experimentally verified.

• Journal of Plant Biotechnology
• /
• v.31 no.1
• /
• pp.55-60
• /
• 2004

This experiment was carried out to develop rapid mass propagation via shoot organogenesis system from adventitious roots of Rehmannia glutinosa. The induction of adventitious roots from leaf explants was most favorable to MS solid medium supplemented with 2mg/L IBA. However, the growth of adventitious roots was highest when they were cultured on 1/3 strength MS liquid medium supplemented with 2mg/L IBA. When the adventitious roots were grown in 10L bioreactor, 10g roots as initial inoculum was increased to 225g after 6 weeks of culture. The harvested roots were cultured onto solid medium to induce plant regeneration. The optimal adventitious shoot formation was observed on MS medium supplemented with 2mg/L BA. Rooting of individual shoots was induced after transfer to half strength MS medium without growth regulators. Plantlets after acclimatization were successfully transplanted in the field and no phenotypic variation was observed among them.

• Korean Journal of Animal Reproduction
• /
• v.23 no.3
• /
• pp.221-227
• /
• 1999

Successful cryopreservation of bovine immature oocytes can increase availably of oocytes for the in vitro fertilization or nuclear transfer. However, it was not reported successful development to the blastocyst stage following in vitro fertilization of cryopreserved bovine immature oocytes. The objective of this study was to determine the incidence of survival, meiotic maturation, fertilization and in vitro development of cryopreserved bovine immature by ultra rapid cooling methods. The oocytes were adversely affected by brief exposure to EFS40 solution in electron microscope grids and plunged directly into liquid nitrogen. After such ultra-rapid cooled immature oocytes were warmed, 78% of oocytes were matured to the metaphase II stage, 50% of oocytes were fertilized after insemination, and 5% of oocytes were developed to the blastocyst stage. Different sodium concentration of sodium ion in the freezing medium did not affect survival, maturation, fertilization and in vitro development of cryopreserved oocytes. These results suggested that immature bovine oocytes can be cryopreserved by ultra-rapid cooling methods.

• Proceedings of KOSOMES biannual meeting
• /
• 2009.06a
• /
• pp.105-111
• /
• 2009

Marine pollution prevention manager system has been operated for the purpose of preventing marine pollution from ships and marine facilities in Korea. As a new "marine environment management act" replacing an old "marine pollution prevention act" had entered into force from January 20, 2008, the works and business of the education and training courses for marine pollution prevention manager are scheduled to transfer from KIMFT(Korea Institute of Maritime and Fisheries Technology) and FHRDI(Fisheries Human Resource Development Institute) to KOEM(Korea Marine Environment Management Corporation) on January 1, 2011. The present state of the education and training for marine pollution prevention managers on board ships was surveyed and analyzed In order to prospect trainee demands for the education and training and to provide KOEM with basic data for establishing a new system for the education and training. The existing education and training courses of KIMFT for marine pollution prevention manager on board ships are classified into a regular course of 21 classes for 3 days, a reeducation course of 18 classes for 2 days and a NLS course of 17 classes for 2days. The annual numbers of trainees in 2008 were 516 persons for regular course, 1085 persons for reeducation course and 135 persons for NLS course in KIMFT. The trainee demands for the education and training were attempted to be predicted on a basis on annual increase rate of ships. The predicted demands for the education and training are changeable depending on the major factors such shipping market, naval architecture industry, etc.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.723-729
• /
• 2016

This study compared fin-tube and parallel-flow heat pipes for their sensible heat exchange rate, heat recovery amount, and air-side pressure drop. Tests were done with different refrigerant charging rates of 40-60% vol. and air flow rates of 300-1,400. The sensible heat exchange rate was highest for both types of heat pipes at a working fluid charge of 40% vol. and low flow rate. For the parallel-flow heat pipe, the 60% vol. charge is too high and results in a low sensible heat exchange rate. The reason is that the thicker liquid film of the tube wall deteriorates the heat transfer effect. Hence, the optimal charging rate is 40 to 50% vol. The evaporator heat pipe has a larger air-side pressure drop than the condenser section heat pipe. The reason is considered to be condensation water arising from the evaporator surface. Compared to the fin-tube heat pipe, the parallel-flow heat pipe showed better performance with a working fluid charging rate of 48%, volume of 41%, and an air-side pressure drop about 37%.

• Journal of Environmental Health Sciences
• /
• v.38 no.1
• /
• pp.8-17
• /
• 2012

Objectives: Perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) are man-made, persistent global pollutants widely diffused throughout the environment. They have been even found in the cord blood and breast milk of humans. Furthermore evidence of developmental toxicity in animals exists. To assess the distribution of maternal and fetal exposure to PFOS and PFOA, we analyzed paired maternal blood, cord blood and breast milk samples. Methods: Maternal blood, cord blood and breast milk were collected from 150 volunteers from the general population (aged 20-40, mean $30.5{\pm}2.9$) of the city of Busan in 2009-2010. The samples were extracted using the weak anion exchange and solid-phase extraction methods and quantified by high-performance liquid chromatograph (HPLC, Agilent 1200 Series) coupled with an Triple Quad LC-MS/MS system (Agilent 6410). Results: Median PFOA and PFOS concentrations in maternal blood were 2.18 and 3.32 ng/ml, in cord blood were 0.83 and 0.58 ng/ml, and in breast milk were 0.13 and 0.11 ng/ml, respectively. PFOS and PFOA concentrations were significantly correlated among matrices (Spearson's ${\rho}=0.226$, p = 0.05 for maternal blood; ${\rho}=0.736$, p < 0.01 for cord blood; ${\rho}=0.493$ p < 0.01 for breast milk). The ratio of cord blood/maternal blood was 0.39 for PFOA and 0.19 for PFOS. The ratio of breast milk/maternal blood was 0.07 for PFOA and 0.06 for PFOS. Conclusions: Our findings suggest that PFOA and PFOS exposure through the placenta was more prominent than through breast milk among Korean neonates born in Busan. The transfer efficiency of maternal blood to breast milk was similar between PFOA and PFOS, but that of maternal blood to cord blood was higher in PFOA than PFOS.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.3 s.309
• /
• pp.25-33
• /
• 2006

This paper proposed device-independent color matching algorithm based on the 3D RGB lookup table (LUT) between mobile camera and mobile LCD (Liquid Crystal Display) to improve the color-fidelity. Proposed algorithm is composed of thee steps, which is device characterization, gamut mapping, 3D RGB-LUT design. First, the characterization of mobile LCD is executed using the sigmoidal function, different from conventional method such as GOG (Gain Offset Gamma) and S-curve modeling, based on the observation of electro-optical transfer function of mobile LCD. Next, mobile camera characterization is conducted by fitting the digital value of GretagColor chart captured under the daylight environment (D65) and tristimulus values (CIELAB) using the polynomial regression. However, the CIELAB values estimated by polynomial regression exceed the maximum boundary of the CIELAB color space. Therefore, these values are corrected by linear compression of the lightness and chroma. Finally, gamut mapping is used to overcome the gamut difference between mobile camera and moible LCD. To implement the real-time processing, 3D RGB-LUT is designed based on the 3D RGB-LUT and its performance is evaluated and compared with conventional method.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.2 no.2
• /
• pp.39-46
• /
• 1982

A model of substrate removal by rotating discs has been developed for a better understanding of the process, and the performance of the system has been evaluated under steady and unsteady state. The model was constructed based upon mass transfer of the substrate from the bulk solution to the biofilm and a simultaneous removal of the substrate by the biomass. The model is composed of a few sets of differential equations representing mass balance within the elements of a liquid film and a biofilm, and in the bulk solution. Substrate removal efficiency of the process is largely dependent on a diffusion coefficient of the substrate within the biofilm and a maximum rate of substrate removal of the biomass. The efficiency is affected to a greater extent when the substrate concentration is low and the maximum substrate removal rate is high. The efficiency increases proportionally with increasing film depth when the biofilm is shallow, however, the rate of increase gradually decreases with an increase of the film depth. As the film reaches a limiting depth, the efficiency remains constant. Unlike the steady state, the effluent quality is affected by the tank volume under dynamic state. Increasing tank volume decreases peak concentration of the effluent under peak loading. Additional tank volume provides a buffer capacitya.gainst a peak loading and the holding tank behaves like an equalization tank.

• Journal of Animal Environmental Science
• /
• v.15 no.3
• /
• pp.281-288
• /
• 2009

The objective of this study is to predict the expansion possibility of treatment capacity in public livestock manure treatment plant (PLMTP) integrated individual farmhouses. According to the treatment efficiency and cost reducing effect, expansion possibility was examined using three cases; (i) decrease of influent concentration from 20,000 mg/L BOD to 1,000 mg/L BOD, (ii) maintenance of low concentration influent with minimum revising existing facilities (BIOSUF) and (iii) maintenance of low concentration influent without revising existing facilities (liquid corrosion method, LCM). In BIOSUF, the treatment capacity increased from 130 ton/day to 300 ton/day. Also, LCM resulted in expansion of treatment capacity from 210 ton/day to 250 ton/day while that of designed concentration influent decreased from 210 ton/day to 190 ton/day. The treatment costs were 14,674 won/ton and 9,929 won/ton for BIOSUF and LCM, respectively. After some revisions, it will be changed to 7,221 won/ton and 8,277 won/ton. Therefore, it must be considered that the livestock manure treats to low concentration and flows into PLMTP for the efficient operation and reducing treatment cost.

• Composites Research
• /
• v.30 no.1
• /
• pp.46-51
• /
• 2017

Structural battery has been researched extensively to combine the functions of the battery and structure without gravimetric or volumetric increments compared to their individual components. The main idea is to employ carbon fabric as the reinforcement and electrode, glass fabric as the separator, and solid-state electrolyte which can transfer load. However, state-of-the-art solid-state electrolytes do not have sufficient load carrying functionality and exhibiting appropriate ion conductivity simultaneously. Therefore, in this research, a system which has both battery and load carrying capabilities using glass fabric separator and liquid electrolyte was devised and tested to investigate the potential and feasibility of this structural battery system and observe electric properties. It was observed that elongating separator decreased electrical behavior stability. A possible cause of this phenomenon was the elongated glass fabric separator inadequately preventing the penetration of small particles of the cathode material into the anode. This problem was verified additionally by using a commercial separator. The characteristic of the glass fabric and the interface between the electrode and glass fabric needed to be further studied for the realization of such a load carrying structural battery system.