• 한국전산구조공학회논문집
• /
• 제15권1호
• /
• pp.147-154
• /
• 2002

수직방향 가속도를 받는 원통형 액체 저장탱크는 내부유체의 슬로싱(sloshing)에 의한 동하중에 의하여 구조 및 제어성능 안정성에 심각한 영향을 받을 수 있다. 더욱이 유체의 슬로싱 진동수가 제어계 혹은 탱크구조물의 고유진동수 근처에 있게되면 발사체에 큰 동하중과 모멘트를 유발하게 된다. 이와 같은 유체의 동적 효과를 억제하기 위하여 일반적으로 링형 탄성체 배플(baffle)을 채용하고 있다. 본 논문에서는 배플의 개수와 내경을 변수로 설정하여 배플의 동적억제효과를 평가 및 분석하기 위한 수치해석을 수행한다. 배플내경에 따른 파라메트릭 해석과, 탱크높이 및 유체높이를 각각 균등 분할하여 설치된 배들에 대한 동억제 효과를 분석한다. 유체와 구조물 사이의 정확하고 효과적인 연계해석을 위하여 ALE(arbitrary Lagrangin-Eulerian) 수치해석 기법을 적용한다.

• 대한전자공학회논문지TE
• /
• 제42권4호
• /
• pp.27-32
• /
• 2005

액체 밸브는 실린더 부분과 액체부분으로 분리 또는 일체형 구조로 되어 있으며, 불소수지 Packing에 STS(stainless) 축을 삽입하여 실린더 머리에 연결된 구조로 되어있어 액체를 주입과 차단시 상하왕복 작동으로 인해 불소수지 패킹과 STS 축 사이에 마찰로 인해 액체의 누설로 인해 작업 환경 저하와 각 부품교체로 인한 작업능률의 저하로 생산성이 목표치에 이르지 못하고 있다. 이에 따라 액체밸브 설계에서부터 재질, 구조변경 등의 필요성이 있으며, 설계, 재질선택, 구조변경 등을 연구하였다. 본 논문은 기존의 문제점을 근본적으로 해소하고자, 피스톤과 연동되는 진동의 개발로 피스톤이 쉽게 마모되는 것을 방지하여 장 수명을 충족시키고 누설방지를 제공하는데 목적이 있다. 액체 토출후 노즐 팁에 액체가 잔류하는 것을 방지할 수 있도록 피스톤이 후퇴 시 이를 흡입시킬 수 있는 기능을 부가하여 방울 맺힘을 방지함을 목적으로 하고 있다.

• 한국응용과학기술학회지
• /
• 제32권1호
• /
• pp.116-126
• /
• 2015

본 연구에서는 이산화탄소 고정화에 있어 이산화탄소 전환을 위해 MEA를 이용한 습식화학흡수법의 셔틀메카니즘을 도입하였다. 또한 알칼리 무기물질을 다량 함유한 산업부산물을 습식탄산화법을 이용해 처리하고자 하였다. 즉, 산업부산물의 화학적 처리를 통해 칼슘이온을 용출하였다. 산성물질을 이용한 용출상징수를 ICP로 분석한 결과, 칼슘이온이 최대 17,900 ppm(1.79%)을 확보하였다. 또한 MEA를 이용한 습식 흡수공정을 통해 상온, 상압조건의 이산화탄소 분위기에서 94%의 전환률을 얻었다. 슬러지의 액상탄산화를 통해 슬러지 mg 당 0.175 mg의 이산화탄소를 고정하였으며, 최종생성물의 XRD 분석결과 일반적인 탄산칼슘의 결정구조인 calcite 형상을 확인하였다.

• 한국응용과학기술학회지
• /
• 제30권2호
• /
• pp.215-224
• /
• 2013

Recently, many cosmetic researchers have been focused on the development of high functional cosmetics including anti-wrinkle and whitening. In these studies, they couldn't afford to pay a deep attention to stable encapsulations for unstable materials and efficient drug deliveries for them. Particularly, in order to show a degree of instant effects as cosmetics, they can't also ignore moisturizing effect enough to satisfy customers just after applying and its maintenance by improving the function of skin barrier as well as above two effects. Therefore, skin analogue systems have attracted considerable attention in the view of structural and compositional similarity to intercellular membrane in stratum corneum. And, some models for skin analogue composition were developed to improve the function of skin barrier, stably encapsulate unstable materials such as retinol, vitamin B, C, E, etc., and control their skin penetration in order to show good effects as cosmetics. In this study, we suggest the new skin analogue model having the compositional similarity as well as conventional structural ones. Our skin analogue membrane(SAM) is mainly composed of ceramide/ cholesterol/phosphatidylcholin/fatty acids and its structural defects are compensated by including cholesterol amphiphile and controlling the ratio of ceramide/cholesterol. It was possible to confirm the formation of skin analogue membrane having highly-densed multilamella structure and compare them according to the change of each ratio with a polarized microscope, X-ray diffraction. More detaily, we observed their structures with a electron microscope(TEM). Finally, we dispersed them in excess of continuous water phase, observed the formation of maltese-cross liquid crystalline and measured the efficiency of drug deliveries and moisturizing effects.

• Reproductive and Developmental Biology
• /
• 제39권1호
• /
• pp.7-11
• /
• 2015

Preservation of liquid semen is an important factor for breeding management in swine industry. Oxidative stress of spermatozoa during liquid preservation has a detrimental effect on sperm quality and decreases fertility. Objective of this study was to determine the effect of antioxidant, Quercetin, on capability of porcine liquid semen preservation. Freshly collected porcine semen from boars (n=3), having proven fertility was counted, diluted to $3{\times}10^7/mL$ and divided into 5 different semen extenders. Aliquots of diluted semen with different extenders were subjected to measure the pH, motility, viability and sperm DNA structure status on elapse time after preservation for 10 days. For the first 3 days, semen preserved in all 5 different extenders maintained their initial pH and either gradually decreased or increased thereafter, indicating lipid peroxidation has started. Sperm motility (r=0.52, p=0.01) and viability (r=0.55, p=0.03) had positive correlation with semen pH. Sperm motility was maintained well (p<0.05) in especially 2 extenders containing Tris and antioxidant compared to other extenders, suggesting both Tris and antioxidant worked as pH regulator and had beneficial effects on sperm characteristic during preservation. Sperm DNA structure status accessed by sperm chromatin structure assay on elapsed time after preservation, tended to be higher in semen preserved without antioxidant. Taken together, addition of antioxidant to extender prevents the sperm from oxidative stress during storage in mechanism by which antioxidant slows the lipid peroxidation, and thus reduced the reactive oxygen species in preserved porcine semen resulted in maintaining semen pH, sperm motility and viability for 7~10 days.

• 한국유체기계학회 논문집
• /
• 제18권6호
• /
• pp.57-62
• /
• 2015

The test of comparing liquid flow calibration system (approved by KOLAS) for accuracy and structure change test was performed in the test bed in order to evaluate the typical characteristics of the electromagnetic flow meters and parshall flume that are generally used in the water discharging facilities. The results of the accuracy comparing test with liquid flow calibration system showed the error of less than 2%. Pharshall plume got error up to -8.3% (low flow) from the flow rate test, but less than 4% from the accumulated flow test because of offset error at high flow rate and low flow rate. Evaluation of structual change test was tested with only parshall flume using structure and it consisted of installation angle (parshall flume and level sensor) and position change. Installation angle, water level sensor angle and position changing test for parshall flume had errors of 3.1%~-9.2%, 0.4%~-5.6% and 0.2%~1.3% respectively. Especially, the error showed the largest increase when the water level sensor measured the point of decreased flow by the structure change. Therefore, error factors (change of straight pipe length, installation of obstacle or effect of foreign substances on water level sensor) that can often occur in the field should be derived and the research for optimized installation method should be carried out continuously.

• 폴리머
• /
• 제24권3호
• /
• pp.342-349
• /
• 2000

아이소탁틱 폴리프로필렌과 대두유 시스템으로부터 열유도 상분리 및 연신공정에 의하여 중공사막을 제조하였다. 막의 구조와 성능에 관계되는 각종 조업변수들의 영향을 조사하였고 이들을 최적화하였다. 폴리프로필렌/대두유의 용융점도가 microfibril 형성에 영향을 미침을 확인하였고 기핵제를 첨가함에 따라 핵생성 밀도가 증가하여 연신에 의한 구정 간의 기공형성이 향상되었다. 막을 열처리함으로써 연신 시 유도되었던 stress를 이완시켜 막의 수축현상을 방지하여 다공도를 유지할 수 있었다. 기핵제를 첨가한 경우 고-액 상분리에 의하여 구조가 형성되며 응고조의 온도 변화에 따라 핵 생성 밀도가 변화하게 되고 이에 따라 연신에 의한 기공 형성이 영향을 받게 되었다. 기핵제를 첨가하지 않은 경우 핵 생성이 활발하지 않아서 주로 액-액 상분리 거동이 구조 형성에 영향을 미치게 되며 응고조 온도 변화에 따른 효과가 기핵제를 넣은 경우와는 반대의 경향을 나타내었다.

• Journal of Mechanical Science and Technology
• /
• 제17권3호
• /
• pp.400-408
• /
• 2003

A study on the progressive inelastic deformation behavior of the 316 L stainless steel cylindrical structure with plate-to-shell junction under moving temperature front was carried out by structural test and analysis. The structural test intends to simulate the thermal ratcheting behavior occurring at the reactor baffle of the liquid metal reactor as free surface of hot sodium pool moves up and down under plant transients. The thermal ratchet load that heats the specimen up to 550$^{\circ}C$ was applied repeatedly and residual deformation was measured. The thermal ratcheting test was carried out with two types of cylindrical structures, one with plate to-shell junction and the other without the junction to investigate the effects of the geometric discontinuities on the global ratcheting deformation. The temperature distributions of the test specimens were measured and were used for the ratcheting analysis. The ratchet deformations were analyzed with the constitutive equation of the non-linear combined hardening model. The analysis results were in good agreement with those of the structural tests.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.1007-1010
• /
• 2006

This study investigates the spatial structure of the total cloud liquid water content Q fields over the Northwest Pacific Ocean during winter monsoon. The distributions of Q have been estimated from the brightness temperatures of the ocean - atmosphere system $T_B(f)$, where f is frequency, measured by AQUA AMSR-E in January -March 2003. Marine strati (St) and stratocumuli (Sc) are typical for winter monsoon season. They were analysed using mainly high-frequency channel at f = 36.5 GHz, vertical polarisation. $T_B$ data were accompanied by the data on near surface wind speed, air temperature and humidity from the nearest meteorological stations. Tow one-dimensional spectra were computed for downwind and crosswind sections of Q fields. The AMSR-E antenna field of view (14-8 km) and the cloud field sizes (100-1000 km) restricted the spatial scales. The results of case study Jan 31 2003 are presented. Scale-invariant spectrum is typical. In the cases of extended St levels a spectral slope equals about -1.7, conforming to classical -5/3 of turbulence theory. For Sc cases the absolute magnitude of spectral slope is rather higher, as a rule. The value is about -2. In the case when cloud streets are presented, a strait line form of spectrum is less reliable with a slope being rather lower (about -1.4).

• 한국가구학회지
• /
• 제26권4호
• /
• pp.383-391
• /
• 2015

In recent years the industry has utilized some of the 3D printers in the manufacturing process a trend which spread also a personal desktop 3D printer priced. The 3D printer can create the 3D object by using an ink or a laser instead of the powders, and various liquid plastic material. Properties of 3D printers are liquid, solid, powder and raw materials are also classified as varied. New ideas and processes in the form of designer furniture, becoming increasingly evolved through the development of materials and technologies. Science, art and technology combine to create a new aesthetic for the complex and free binding structure is a combination of design and materials are available in craft and the structure appears not showing. 3D scanning was not simply continue to develop as the production process by a variety of tools and content transformation. Create new mathematical tables and chairs designed by the theory fit the digital age shows a coupling structure with decoration into small pieces. It has created a new craft technique in the digital age.