• Journal of ILASS-Korea
• /
• v.12 no.4
• /
• pp.204-210
• /
• 2007

The worldwide energy problem and global warming cause the need of alternative fuels which feature low carbon-dioxide emission and another energy source. Liquefied Petroleum Gas (LPG) is one of the alternative fuels widely used as domestic and transportational fuel. The third generation LPLi fuel supply system has merits in the increase of engine power and low emissions. The injectors used in LPLi system should overcome a leakage problem and satisfy the durability conditions. Therefore, 1000 hour durability test of the injectors was carried out throughout this research. First, the spray pattern and the penetration length of the selected injectors is graphically shown. Next, the leakage amount with respect to the injection cycle is introduced. Finally, the shapes of nozzle holder and nozzle tip after durability test was investigated by analyzing the microscopic image of the injector tip. The variation in the shape of nozzle tip mainly due to the residue of rubber materials is found to be the reason for leakage.

• Journal of the Korean Chemical Society
• /
• v.7 no.2
• /
• pp.128-132
• /
• 1963

A study has been made on the applicability of gas-liquid partition chromatography to the qualitative and quantitative analysis of complex mixture of gaseous hydrocarbons. While phthalate columns are widely used for this $purpose^9$, they separates neither saturated hydrocarbons from the unsaturated nor n-butane from isobutene or butene-1, therefore combined columns such as phthalate and dimethylsulfolane have been used for the perfect separation of gaseous hydrocarbons. It is shown by this study, however, that hydrocarbons having $C_1$ through $C_4$ can be separated with a 2-meters tetraethyleneglycol dimethylether column except ethane from ethylene, and trans-from cis-2-butene especially operated at $15^{\circ}C$$ using helium as the carrier gas. The column effluents were in order of methane, (ethane, ethylene), propane, propylene, isobutane, n-butane, isobutylene, butene-1, (trans-& cis-2-butene, isopentane), (butadiene-1, 3, n-pentane). Two kinds of liquified petroleum gases in market are analysed qualitatively and quantitatively. The results indicate that use of this 2-meters TEGDE column permits the separation and identification of all the commonly encountered aliphatic gaseous hydrocarbons.

• Journal of the Korean Chemical Society
• /
• v.21 no.6
• /
• pp.449-452
• /
• 1977

The effect of carbon number of hydrocarbon used as a carbon source in the production of cellular lipid of Rhodotorula sp. and its fatty acid composition were investigated. Using Rhodotorula sp. on n-tetradecane and n-hexadecane whose carbon numbers are even, fermentation was carried out in a jar fermentor of 2 liter-capacity at $28^{\circ}C$, with pH range of 4.0∼4.6 and at oxygen flowing rate of 0. 4 vvm and agitation velocity of 1000 rpm. Drying the produced cell after completion of fermentation, cellular lipid was extracted from the cell using soxhlet extractor and examined its fatty acid composition by gas-liquid chromatography. Cellular lipid content in the cell produced on n-tetradecane and n-hexadecane were 12.0 % and 25,8 % on the basis of dry cell weight, respectively and their fatty acids were mostly even numbered in carbon number.

• Journal of the Korean Institute of Gas
• /
• v.11 no.4
• /
• pp.29-34
• /
• 2007

In recent years, the need for more fuel-efficient and lower-emission vehicles has driven the technical development of alternative fuels such as LPG(Liquefied Petroleum Gas) which is able to meet the limits of better emission levels without many modifications to current engine design. LPG has a hish vapor pressure and lower viscosity and surface tension than diesel and gasoline fuels. These different fuel characteristics make it difficult to directly apply the conventional gasoline or diesel fuel pump. In this study, experiments are performed to get performance and efficiency of the fuel pump under different condition of the temperature, rotating speeds, and composition of fuel. The characteristics of fuel pump were affected by cavitation occurred from the variation of temperature and composition.

• Journal of ILASS-Korea
• /
• v.16 no.3
• /
• pp.152-158
• /
• 2011

Fast pyrolysis of biomass is one of the most promising technologies for converting biomass to liquid fuels. The pyrolysis oil, also known as the bio crude oil (BCO), have been regarded as an alternative fuel for petroleum fuels to be used in diesel engine. However, the use of BCO in diesel engine requires modifications due to low energy density, high water contents, low acidity, and high viscosity of the BCO. One of the easiest way to adopt BCO to diesel engine without modifications is the use of BCO/diesel emulsions. In this study, a diesel engine operated with diesel, bio diesel (BD), and BCO/diesel emulsion was experimentally investigated. Performance and emission characteristics of a diesel engine fuelled by BCO/diesel emulsion were examined. Results showed that stable engine operation was possible with emulsion and engine output power was comparable to diesel and bio diesel operation. Long term validation of adopting BCO in diesel engine is still needed because the oil is acid, with consequent problems of corrosion especially in the injection system.

• International journal of advanced smart convergence
• /
• v.7 no.1
• /
• pp.1-6
• /
• 2018

In addition to the instability of energy import costs caused by the depletion of petroleum resources, which is a representative energy resource, and the strengthening of various regulations such as the convention on climate change, the plant for bio energy production, which is being watched as the next generation energy, and became subject of various complaints. In order to solve this problem, the bio-plant is underground and the ground is parked, making the convenience and accessibility of citizens more and more accessible. In this situation, the development of bioenergy production technology also increases the risk factor in bioenergy production process. Accordingly this paper explains method about apply the wide angle camera based AOA algorithm to the bio plant to prevent the accidents from spreading due to the lack of facilities and safety devices and the aging of the facilities and suggests a technique that can quickly identify the location and direction when it occurs.

• Clean Technology
• /
• v.26 no.4
• /
• pp.279-285
• /
• 2020

Laboratories and industrial processes typically involve the use of flammable substances. An important property used to estimate fire and explosion risk for a flammable liquid is the flash point. In this study, flash point data at 101.3 kPa were determined using a SETA closed cup flash point tester on the following solvent mixtures: {2,2,4-trimethylpentane + methylcyclohexane}, {2,2,4-trimethylpentane + ethylbenzene}, and {2,2,4-trimethylpentane + p-xylene}. The purpose of this work is to obtain flash point data for binary mixtures of 2,2,4-trimethylpentane with three hydrocarbons (methylcyclohexane, ethylbenzene, and p-xylene), which are representative compounds of the main aromatic hydrocarbon fractions of petroleum. The measured flash points are compared with the predicted values calculated using the GE models' activity coefficient patterns: the Wilson, the Non-Random Two-Liquid (NRTL), and the UNIversal QUAsiChemical (UNIQUAC) models. The non-ideality of the mixture is also considered. The average absolute deviation between the predicted and measured lower flash point s is less than 1.99 K, except when Raoult's law is calculated. In addition, the minimum flash point behavior is not observed in any of the three binary systems. This work's predicted results can be applied to design safe petrochemical processes, such as identifying safe storage conditions for non-ideal solutions containing volatile components.

• Journal of Navigation and Port Research
• /
• v.43 no.6
• /
• pp.469-474
• /
• 2019

One of the world's major resources is crude oil, the most fundamental part of the industry. There is no place that does not use crude oil. Petroleum refining products and chemical production industrial products are produced through nearby petrochemical complexes and ports after importing crude oil. There would be a possible relationship among the petrochemical complexes and nearby regional ports working with liquid cargoes. To confirm these relations, Ulsan Port, Daesan Port, and Yeosu Gwangyang Port were selected for this study. A Vector Auto Regressive model using time series data was applied. A Unit Root Test was performed. The relationship was confirmed through the Granger and Toda Yamamoto Causality Test.

• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.248-257
• /
• 2008

Coal liquefaction technology was established in Germany in 1920s. Coal liquefaction refers to the process in which coal is converted into liquid fuels such as gasoline and diesel oil under certain conditions. Coal liquefaction is usually classified into direct coal liquefaction (DCL) and indirect coal liquefaction (ICL). Various technologies for coal liquefaction, conducted between 1970s and 2000s, resulted in the development and optimization of a communication ready technology for the production of petroleum substitutes as refinery feedstocks. The purpose of this paper is to review the research, development and demonstration of coal liquefaction. In these respects, various DCL and ICL processes under development were illustrated and compared. Also, the status and perspective of coal liquefaction projects in the world were viewed. Considering the scale, and technical difficulties of domestic coal liquefaction, the project has be leaded by the government.

• Journal of Korea Port Economic Association
• /
• v.36 no.4
• /
• pp.1-16
• /
• 2020

Since Korea has excellent port infrastructure and competitive petrochemical complexes, there is plenty of potential for creating an oil hub in Northeast Asia. In particular, Ship-to-Ship (STS), which creates high added values, contributes greatly to the national economy. In this study, the liquid cargo volumes of chemical industrial products, refined petroleum products, and crude oil were analyzed at the national and regional (Busan, Ulsan, and Yeosu/Gwangyang) levels. Additionally, a Granger causality analysis was performed between imports, exports, and transshipments, in pairs. ADF, PP, and KPSS were analyzed for the unit root test. In addition, the VAR model and expanded VAR model suggested by Toda and Yamamoto were used for further analyses. Findings revealed a difference in Granger causality depending on the region or cargo type. These findings suggest that policies and incentive schemes for ports need to be differentiated according to the region and cargo types. In addition, the different patterns in the relationship between transshipments and import-export petrochemical cargoes should be considered.