• 방사선산업학회지
• /
• 제18권2호
• /
• pp.147-153
• /
• 2024

Radioactive liquid waste generated during operation and overhaul is collected and reused through the radioactive liquid waste treatment system and continuous monitoring system in the nuclear power plant or discharged to the outside if it satisfies the limit within the control and monitoring. However, there are concerns about boric acid management, which controls the power output of nuclear power plants in radioactive liquid waste. Due to the behavior of boric acid, it is difficult to remove it in the existing liquid radwaste system, and the concentration of boric acid water discharged tends to be higher than the natural state of 5 ppm, so additional facilities should be considered. Therefore, this study aims to evaluate the radiological effects of radioactive waste treatment facilities that are under development and use them as a basis for managing worker exposure and evaluating the safety of facilities in the future.

• 약학회지
• /
• 제23권3_4호
• /
• pp.181-186
• /
• 1979

A high performance liquid chromatograpic procedure is described for determining ginseng saponins such as ginsenoside-Rb1, -Rb2, -Rc, -Rd, -Re, -Rf, -Rg1, and-Rg2. Ginseng saponins extracted with 90% methanol and water-saturated butanol were compared with pure standard ginsenosides. The resolution of the saponins was satisfactory and detection limit for each saponin was about 5.mu.g. Separation of the saponins was accomplished using a .mu. Bondapak carbohydrate analysis column, mobile phase of acetonitrile-water-butanol (80:20:15) and differential refractive index (RI) detector. The reproducibility and the recovery were also studied. This method was applied for determining the saponin contents of several parts of leaf, fresh ginseng, white ginseng, and red ginseng.

• 설비공학논문집
• /
• 제13권10호
• /
• pp.1025-1033
• /
• 2001

A scaling analysis is provided which predicts the sliding velocity of a liquid drop down an inclined surface. The analysis is based on the balance of the gravitational work rate that drives the drop sliding and the resistances by capillary and viscous forces. The capillary resistance is accounted for via the contact angle hysteresis, which is quantified by measuring the critical inclination causing the drop to start sliding. The sliding of the drop is governed by the rate of the viscous dissipation of the Stokes flow. The analysis result in its limit form for small contact angles is consistent with previous results. In the experiments to verify the analysis results, the measured sliding velocity of various liquid drops are shown to obey the predictions made in this study.

• Bulletin of the Korean Chemical Society
• /
• 제31권1호
• /
• pp.35-40
• /
• 2010

A comprehensive comparative investigation of small carbohydrates in laser desorption ionization was performed on supporting materials composed of sodiated 2,5-dihydroxybenzoic acid (DHB), carbon nanotubes, an ionic liquid matrix of DHB-pyridine, a binary matrix of DHB-aminopyrazine, zinc oxide nanoparticles, and gold nanoparticles. The abundance of $[M+Na]^+$ ions, where M is glucose or sucrose, was compared for each supporting material. The highest sensitivity for both glucose and sucrose, with a detection limit of 3 pmol, was observed with carbon nanotubes. Both carbon nanotubes and the ionic liquid matrix exhibited the highest reproducibility.

• 한국분무공학회지
• /
• 제9권4호
• /
• pp.46-52
• /
• 2004

An LPG engine (KL6i) for heavy duty vehicle has been developed using liquid phase LPG injection (LPLi) system, which has regarded as one of next generation LPG fuel supply systems. For the KL6i engine, lean burn technology was introduced to minimize the thermal loading and NOx emissions due to an increase of the engine power. In this work, injection timing and piston bowl shape were investigated for the stabilization of lean burn characteristics. Experimental results reveals that fuel stratification induced by these parameters is most effective strategy to extend lean combustion limit in the LPLi system.

• Nuclear Engineering and Technology
• /
• 제34권2호
• /
• pp.117-131
• /
• 2002

Core disruptive accidents have been investigated at Korea Atomic Energy Research Institute(KAERI) as part of the work to demonstrate the inherent and ultimate safety of conceptual design of the Korea Advanced Liquid Metal Reactor(KALIMER), a 150 MWe pool- type sodium cooled prototype fast reactor that uses U-Pu-Zr metallic fuel. In this study, a simple method and associated computer program, SCHAMBETA, was developed using a modified Bethe-Tait method to simulate the kinetics and thermodynamic behavior of a homogeneous spherical core over the period of the super-prompt critical power excursion induced by the ramp reactivity insertion. Calculations of the energy release during excursions in the sodium-voided core of the KALIMER were subsequently performed using the SCHAMBETA code for various reactivity insertion rates up to 100 S/s, which has been widely considered to be the upper limit of ramp rates due to fuel compaction. Benchmark calculations were made to compare with the results of more detailed analysis for core meltdown energetics of the oxide fuelled fast reactor. A set of parametric studies were also performed to investigate the sensitivity of the results on the various thermodynamics and reactor parameters.

• Journal of Electrochemical Science and Technology
• /
• 제10권2호
• /
• pp.177-184
• /
• 2019

An electrochemical detection method for capsaicin has been developed using ionic liquid (IL) doped graphene-titania-Nafion composite-modified electrode. The combination of IL (1-hexyl-3-methylimidazolium with hexafluorophosphate counter ion) in the composite-modified electrode resulted in a significantly increased electrochemical response for capsaicin compared to that obtained at the corresponding electrode without IL. The increased electrochemical signal could be ascribed to the decreased electron transfer resistance through the composite film and also to the effective accumulation of capsaicin on the electrode surface due to ${\pi}-{\pi}$ interaction of the imidazole groups of IL with the aromatic rings of capsaicin. The present IL composite-modified electrode can detect capsaicin with a concentration range from $3.0{\times}10^{-8}M$ to $1.0{\times}10^{-5}M$ with a detection limit of $3.17{\times}10^{-9}M$ (S/N = 3). The present sensor showed good reproducibility (RSD = 3.2%).

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2-2
• /
• pp.226.1-226.1
• /
• 2003

The available period of oral pharmaceutical liquid preparations was decided according to the study of the stability of unopened preparations. But if one reuses the drug after opening the sealed cap, the major components of the drug could change in quality. In addition, there isn｀t any accurate information about the available period of opened oral pharmaceutical liquid preparations. In this study, a long term test, an accelerated test and a microbial limit test are run with C (pseudoephedrine and triprolidine), D (ibuprofen) that are marketed and used frequently. (omitted)

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2-2
• /
• pp.233.1-233.1
• /
• 2003

The available period of oral pharmaceutical liquid preparations was decided according to the study of the stability of unopened preparations. But if one reuses the drug after opening the sealed cap, the major components of the drug could change in quality. In addition, there isn｀t any accurate information about the available period of opened oral pharmaceutical liquid preparations. In this study, a long term test, an accelerated test and a microbial limit test are run with A (acetaminophen), B (L-carbocysteine) that are markdted and used frequently. (omitted)

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제24회 춘계학술대회논문집
• /
• pp.189-193
• /
• 2005

로켓엔진에서 선형 연소 안정한계에 미치는 유한화학반응의 열적 효과와 막냉각 효과를 조사하였다. 안정한계를 평가하기위해 3차원 연소실에서 유한화학반응을 채택한 반응 유동장 계산으로부터 구한 유동변수들을 사용하였다. 주요 유동변수들의 값은 유한화학반응 모델의 채택으로 인해 상당히 달라졌으며 결과적으로 안정한계도 수정되었다. 유한화학반응은 열적 관점에서 안정성 향상에 기여함을 알았다. 또한, 막냉각을 한 경우, 안정성 경향이 향상됨을 알 수 있었다.