• 폴리머
• /
• 제30권4호
• /
• pp.338-349
• /
• 2006

셀룰로오스, 아밀로오스, 키토산, 키틴, 알긴산, 풀루란 또는 아밀로펙틴을 (8-콜레스테릴옥시카보닐)헵타 노일 클로라이드 (CH8C)와 반응시켜 전치환 또는 거의 전치환 (8-콜레스테릴옥시카보닐) 헵타노화 다당류 유도체들을 합성함과 동시에 이들의 열방성 액정의 거동들을 검토하였다. CH8C 의 경우와 같이, 아밀로펙틴 유도체를 제외한 모든 다당류 유도체들은 좌측방향의 나선구조를 지니며 온도상승에 의해 광학피치들 $({\lambda_m}'s)$이 감소하는 단방성 콜레스테릴 상들을 형성하였다. 아밀로펙틴 유도체도 좌측방향의 나선구조를 지닌 단방성 콜레스테릴 상을 형성하나 다른 다당류 유도체들과 달리 콜레스테릴 상의 전 범위에서 반사색깔들을 나타내지 않았다. 이러한 사실은 콜레스테릴 그룹에 의한 나선의 비틀림력은 아밀로펙틴 중의 분기구조에 민감하게 의존함을 시사한다. 다당류 유도체들에서 관찰되는 액정 상의 열적 안정성과 질서도, 동일한 온도에서의 ${\lambda}_m$ 의 크기 그리고 ${\lambda}_m$의 온도 의존성은 콜레스테릴 그룹들을 유연한 스페이서들을 통하여 유연한 흑은 반강직한 골격들에 도입시켜 얻은 고분자들에 대해 보고된 결과와 전혀 다르다. 이들의 결과를 주사슬과 곁사슬의 화학구조 그리고 주사슬의 유연성의 차이와 관련하에서 검토하였다.

• Elastomers and Composites
• /
• 제37권4호
• /
• pp.244-257
• /
• 2002

주사슬에 나프탈렌고리와 테트라메틸렌 및 헥사메틸렌 유연격자를 가지면서 트라이어드메소겐을 갖는 새로운 열방성 방향족 액정 폴리에스테르(TLCP)를 용액중합법에 의하여 합성하였다. TLCP의 함량을 달리하는 TLCP/PEN in situ 복합재료를 용융방사하여 연신비가 각각 다른 단섬유를 제조하고 그들의 열적, 기계적 특성 및 모폴로지를 조사하였다. 합성된 TLCP는 네마틱 액정중합체였으며 고체상에서 액정상으로의 전이 온도는 249 ℃였다. 블렌드내의 TLCP 도메인들은 매트릭스 고분자인 PEN에 잘 분산 되었으며 어떠한 거대 상 분리 현상도 보여 주지 않았다. TLCP 함량의 증가에 따른 블렌드내 PEN의 cold crystallization 온도가 낮아진 것으로 보아서 TLCP가 PEN에 대한 조핵제 역할을 하였음을 알 수 있었다. 블렌드 섬유내의 TLCP의 도메인 크기는 대략 40 ~ 50 nm정도의 미세한 크기였으며 매트릭스와의 사이에 좋은 계면 접착력을 보였다. 또한 cold 및 hot-drawing 과정을 거친 낮은 draw ratio(DR)에서는 거의 fibril이 형성되지 않았지만, 높은 DR에서는 잘 발달된 fibril들을 보여 주었다. TLCP의 강화효과로 인하여 10 wt% TLCP/ PEN 블렌드 섬유의 초기 모듈러스는 270 %, 인장강도는 235 %의 증가를 보여주었다. 반면에 신장률은 DR의 증가와 함께 감소 하였다.

• 한국의류학회지
• /
• 제18권4호
• /
• pp.524-535
• /
• 1994

The interaction and detergency between oily soil and surfactant solution were studied Samples used were tristearin, tripalmitin and their mixture as a triglyceride, myristic acid as a fatty acid and sodium dodecyl sulfate (SDS) as surfactant. The results were as follows: 1. The mixtures of model oily soils were formed of eutectic point and their melting point were lower than them of individual oily soils. 2. The formation of liquid crystalline (LC) phase was recognized in the triangle phase diagram for SDS~ water~model oily soil system. The areas of LC phase region were in the order of SHS~ water~myristir acid> SDS~ water~mixture of tristearin, tripalmitin and myristic acid (TS/TP/M)>SDS~water~mixture of tristearin and tripalmitin (TS/TP) 3. The LC phase region expanded to wide concentration range of SDS solution and high concentration range of model oily soil with increasing temperature. Particularity, the LC phase region expanded highly at $30~40^{\circ}C$ but when the temperature was elevated above $40^{\circ}C$, expanding tendency decreased. 4. In the system of myristic acid and TS/TP/M contacted with SDS solution, the LC phase was already formed at $28^{\circ}C$ and the region of the LC phase were expanded with increasing temperature. But in the system of TS/TP contacted with SDS solution, the LC phase was not formed in whole experiment temperature. 5. The detergency of myristic acid was very high ann it was recognized that the formation of the LC phase played an important role in the detergency. The detergency of TS/TP was very for low, but when TS/TF was mixed with myristic acid, the detergency of TS/TP increased. It is supposed that the LC phase was formed butween SDS solution and myristic acid promoted to penetration of SDS solution into the inner parts of TS/TP.

• 한국세라믹학회지
• /
• 제50권3호
• /
• pp.238-243
• /
• 2013

We investigated the effect of Pb-metal filler added to a hybrid paste(PbO-$Bi_2O_3-B_2O_3$-ZnO glass frit and Pb-powder), for joining flip-chip sat lower temperatures than normal. The glass transition temperature was detected at $250^{\circ}C$ and the softening point occurred at $330^{\circ}C$. As the temperature increased, the specific density decreased due to the volatility of the Pb-metal and boron component in the glass. When the glass was heat-treated at $350^{\circ}C$ for 5 min, XRD results revealed a crystalline $Pb_4Bi_3B_7O_{19}$ phase that had been initiated by the addition of Pb-filler in the hybrid paste. The addition of the Pb-metal filler caused are action between the Pb-metal and glass that accelerated the formation of the liquid phase. The liquid phase that formed, promoted bonding between the flip-chip substrate sat lower temperature.

• 대한화학회지
• /
• 제40권5호
• /
• pp.365-373
• /
• 1996

Diethylenedisiloxyl 유연격자를 갖는 일련의 새로운 액정화합물을 합성하여 이들의 액정특성 및 말단의 페닐기에 para 치환기들의 스멕틱 그룹 효율성을 조사하였다. 또 말단그룹의 크기 영향을 알아보기 위하여 para 치환된 페닐 대신 $\beta$-naphthyl 그룹을 도입한 화합물도 아울러 합성하였다. 모든 화합물들은 85-95%의 높은 수율로 합성되었으며, 합성된 화합물들은 모두 양방성 액정 특성을 보여주었다. 이중 $X=NO_2$ 화합물은 $S_A$상을 보였고, 나머지 화합물들은 모두 $S_B$상을 보여주었다. 화합물들의 녹음열은 일반적인 액정화합물들과 비교하여 낮은 값을 나타내었으며 등방화열은 비슷한 값을 보였는데, 치환기의 스멕틱그룹 효율성은 $H 순이었다.

• Journal of Pharmaceutical Investigation
• /
• 제34권6호
• /
• pp.443-452
• /
• 2004

Habit is the description of the outer appearance of a crystal. If the environment of a growing crystal affects its external shape without changing its internal structure, a different habit results. Crystal habit and the internal structure of a drug can affect bulk and physicochemical properties, which range from flowability to chemical stability. A polymorph is a solid crystalline phase of a given compound resulting from the possibility of at least two different arrangements of the molecules of that compound in the solid state. Chemical stability and solubility changes due to polymorphism can have an impact on a drug's bioavailability and its development program. During crystallization from a solution, crystals separating may consist of a pure component or be a molecular compound. Solvates are molecular complexes that have incorporated the crystallizing solvent molecule in their lattice. When the solvent incorporated in the solvate is water, it is called a hydrate. To distinguish solvates from polymorphs, which are not molecular compounds, the term pseudopolymorph is used. Identification of possible hydrate compounds is important since their aqueous solubilities can be significantly less than their anhydrous forms. Conversion of an anhydrous compound to a hydrate within the dosage form may reduce the dissolution rate and extent of drug absorption. An amorphous solid may be treated as a supercooled liquid in which the arrangement of molecules is random. Amorphous solids lack the three-dimensional long-range order found in crystalline solids. Since amorphous forms are usually of higher thermodynamic energy than corresponding crystalline forms, solubilities as well as dissolution rates are generally greater. A study on crystal form includes characterization of (l)crystal habit, (2)polymorphism, (3)pseudopolymorphism, (4)amorphous solid.

• Bulletin of the Korean Chemical Society
• /
• 제28권10호
• /
• pp.1651-1655
• /
• 2007

Rod-like polymerizable LC molecules having two different reactive groups, i.e. acryl and diacetylene groups were prepared. 4-Hydroxyphenyldiacetylenes were synthesized by the coupling reaction of 1-bromoalkynes with 4-ethynylphenol and then reacted with 4-(6-acryloyloxyalkyloxy)benzoic acid to give polymerizable LC molecules 4a-d. The mesomorphic properties of compounds 4a-d were investigated by differential scanning calorimetry, polarized optical microscopy and X-ray diffractometry. Compounds 4a-c exhibited smectic and nematic phases, but compound 4d having a longest alkyl tail among the series formed only a smectic phase. Photopolymerizability of acryl and diacetylene groups was investigated by IR spectroscopy. An anisotropic polymer film could be prepared by selective polymerization of acryl groups with 365 nm UV light in the presence of a photoinitiator (2,2-dimethoxy-2-phenylacetophenone). The subsequent reaction of diacetylene groups with 254 nm UV light disrupted the anisotropic structure, suggesting that these LC molecules could be used for imaging on the film.

• 한국주조공학회지
• /
• 제29권4호
• /
• pp.181-186
• /
• 2009

The interrelationship between new parameter ${\sigma}$ and maximum diameter $D_{max}$ is elaborated and discussed in comparison with four other glass forming ability (GFA) parameters, i.e. (1) super-cooled liquid region ${\Delta}T_x (=T_x - T_g)$, (2) reduced glass transition temperature $T_{rg} (=T_g/T_l)$, (3) K parameter $K (=[T_x-T_g]/[T_l -T_x])$, and (4) gamma parameter ${\gamma}(=[T_x]/[T_l+T_g])$ in Ca-based bulk metallic glass (BMG) systems. The ${\sigma}$ parameter, defined as ${\Delta}T^*{\times}P^'$, has a far better correlation with $D_{max}$ than the GFA parameters suggested so far, clearly indicating that the liquid phase stability and atomic size mismatch dominantly affect the GFA of Ca-based BMGs. Thus, it can be understood that the GFA of BMGs can be properly described by considering structural aspects for glass formation as well as thermodynamic and kinetic aspects for glass formation.

• Archives of Pharmacal Research
• /
• 제11권3호
• /
• pp.181-184
• /
• 1988

The effect of clover saponin on the phase transition of liposomal lipid bilayers of dimyristoyl phosphatidylcholine was investigated with differential scanning calorimetry. The thermograms of the liposomal bilayers incorporated with the clover saponin were obtained, and the enthalpy changes and the sizes of cooperative unit of the transition were calculated. The results showed that incorporation of the clover saponin into the liposomal bilayers effectively reduced the transition temperature at which the transition from solid state to liquid-crystalline state occurs, and broadened the thermogram peaks. It also reduced the size of cooperative unit of the transition. These results indicate that the clover saponin might have significant effect on the fluidity of biological membranes.

• 한국결정성장학회지
• /
• 제24권5호
• /
• pp.219-223
• /
• 2014

Pulsed laser ablation in liquid medium was successfully employed to synthesize hydroxyapatite colloidal nanoparticles. The crystalline phase, particle morphology, size distribution and microstructure of the hydroxyapatite nanoparticles were investigated in detail. The obtained hydroxyapatite nanoparticles had spherical shape with sizes ranging from 5 to 20 nm. The laser ablation and the nanoparticle forming process were discussed with explosive ejection mechanism by investigating change of surface morphology on target. The analytical results of XPS, FT-IR and Raman spectroscopy confirms that the stoichiometry and bonding properties of the hydroxyapatite nanoparticles are in good agreement with reported bulk hydroxyapatite materials.