• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.2
• /
• pp.131-137
• /
• 2003

We have performed computer simulation to obtain electro-optic chracteristics of reflective liquid crystal display (LCD) using wide viewing angle LC mode, fringe field switching(FFS). Unlike other reflective LCD modes, in the FFS mode, the LC director in plance so an application to reflective display consisted of polarizer, LC layer and reflector is possible. when an incident light is 550mm, the optimal cell retardation value is 0.1365${\mu}$m and the efficiency of reflectivity is high over 90% with very little wavelength dispersion. Further, we have studied a new reflective display with polarizer, optical compensation film with half plate, LC plus reflector. The display with optimized cell parameters shows high contrast ratio (CR) over 130 with high light efficiency over 90% at normal direction and the CR greater than 5 exists over 60$^{\circ}$ of polar angle in all directions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.04a
• /
• pp.43-44
• /
• 2006

We have studied effect of Patterned Vertical Alignment (PVA) mode on electro-optical characteristics and stability of liquid crystal director upon electrode pattering. In the present studies, LC director field and stability of conventional PVA mode electrode patterns were analyzed and new type of electrode patterns were suggested. At last, comparison between this new type of electrode patterns to conventional electrode pattern types were followed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.485-486
• /
• 2005

Fringe-field switching mode which has a horizontal and vertical electric field exhibits high transmittance and wide viewing angle characteristics. In the FFS mode, a passivation layer between common and pixel electrodes exists, which functions as preventing current leakage of fringe-field. In this paper, we have studied LC behavior, transmittance and operating voltage characteristics with applied voltage as a function of the passivation layer thickness and defined optimal value of the layer to be about $0.5{\mu}m$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.446-447
• /
• 2006

We investigated the electro-optic characteristics of a fringe-field driven twisted nematic (TN) display using a LC with negative dielectric anisotropy depending on electrode structures. The fringe-field driven TN mode known to exhibit wide viewing angle and excellent color characteristics over a wide viewing range and high transmittance. However, when the electrode width and distance between them is large enough, the transmittance is lower than the conventional vertical field-driven TN mode. By narrowing the electrode width and distance, the transmittance reaches the same value of the conventional TN mode.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.4
• /
• pp.10-18
• /
• 2002

This paper reports a methodology for calculating distribution of the director in an In-plane switching liquid crystal cell by a numerical technique. To calculate distribution of the director, we developed a three dimensional finite element method (FEM) and calculated the distribution of electric potential and electric field in the liquid crystal cell. We have considered the free-energy density composed of electric potential and strain energy in the bulk of liquid crystal cell and calculated the switching property of liquid crystal cell by the Ericksen-Leslie equation and the Laplace equation We generated 1,859 nodes and 8,640 elements for IPS mode cell with 24${\mu}{\textrm}{m}$$\times$12${\mu}{\textrm}{m}$$\times$4.5${\mu}{\textrm}{m}$ and performed transient analysis until 16ms. As a result, horizontal electric field occurred at cell region except liquid crystal region above electrodes and the disclination occured on electrodes.

• Korean Journal of Optics and Photonics
• /
• v.19 no.4
• /
• pp.249-254
• /
• 2008

We developed a new x-ray image sensor utilizing a reflection-mode liquid crystal panel as its sensitive element, and tested its functionality by using it to obtain an x-ray image of a printed circuit board. In the liquid crystal x-ray image sensors hitherto reported, the liquid crystal layer is in direct contact with the photoconductive film which is deposited on a glass substrate. In the fabrication of the new x-ray image sensor, a liquid crystal panel is fabricated in the first step by using a pair of glass plates of a few centimeters thicknrss. Then one of the glass substrates is ground until its thickness is reduced to about $60\;{\mu}m$. After polishing the glass plate, dielectric films for high reflectance at 630 nm, a film of amorphous selenium for photoconduction, and a transparent conductive film for electrode are deposited in sequence. The new x-ray image sensor has several merits: primarily, fabrication of a large area sensor is more easily compared with the old fashioned x-ray image sensors. Since the reflection type liquid crystal panel has a very steep response curve, the new x-ray sensor has much more sensitivity to x-rays compared with the conventional x-ray area sensor, and the radiation dosage can be reduced down to less then 20%. By combining the new x-ray sensor with CCD camera technology, real-time x-ray images can be easily captured. We report the structure, fabrication process and characteristics of the new x-ray image sensor.

• Proceedings of the Optical Society of Korea Conference
• /
• 1996.09a
• /
• pp.107-107
• /
• 1996

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.133-136
• /
• 2000

We investigated the improvement of viewing angle using a patterned double twisted (PDT) vertical-alignment (VA) cell mode on a homeotropic alignment layer. Good voltage-transmittance curves for negative dielectric anisotropic nematic liquid crystal (NLC) using the PDT-VA cell without a negative compensation film were obtained. The viewing angle of the PDT-VA cell without a negative compensation film was wider than that of a conventional VA cell.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.822-825
• /
• 2006

We propose a transflective In-Plane Switching mode in which patterned retarder is placed only on the reflective area of the upper substrate side. By selecting optic axes of Half Wavelength Plate and Liquid Crystal as 24 and 90 degree with respect to polarizer, condition of low reflectance for visible wavelength range at black state is found.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.604-607
• /
• 2003

Three ring type LC compounds substituted with isothiocyanato group and fluoro atoms in phenyl ring were synthesized, and blended with KL-series LC mixtures for TV application of TN and IPS-mode. Clearing temperature of new LC mixtures are shown $10{\sim}35{\square}$ higher than commercial mixtures. And response time was also improved $10{\sim}20%$ faster than conventional LC mixtures.