• Journal of the Korean Ceramic Society
• /
• v.32 no.10
• /
• pp.1162-1168
• /
• 1995

Systematic studies of the effects of additives and processing variables on the sintered density and the effect of crystalline forms of starting powders on the microstructure of pressureless sintered silicon carbide are described. Oxide additives were effective for the densification of SiC up to 96% of theoretical density at temperature as low as 185$0^{\circ}C$. Use of embedding powder increased the sintered density, up to 98% of theoretical density, by decreasing the weight loss during sintering. Composite type duplex microstructure has been developed due to the $\beta$longrightarrow$\alpha$ phase transformation of SiC by sintering at 185$0^{\circ}C$ and heat treatment at 195$0^{\circ}C$ for 1h.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.3
• /
• pp.176-186
• /
• 1996

The phenomena of drag reduction using small quantities of a liner macromolecules has attracted the attention of many experimental investigations. On the other hand drag reduction in two phase flow can be applied to the transport of crude oil, phase change system such as chemical reactor, pool and boiling flow, and to flow with cavitation which occurs pump impellers. But the research on dragreduction in two phase flow is not sufficient. The purpose of the present work is to evaluate the drag reduction by measuring pressure drop, void fraction, mean liquid velocity and turbulent intensity whether polymer additives a horizontal single and two phase system or not. Flow pattern of air-water two phase flow was classified by electrical conductivity probe signal. Velocities and turbulent intensities of signal were measured simultaneously with a Hot-film anemometer.

• Journal of the Korean Ceramic Society
• /
• v.44 no.7
• /
• pp.354-357
• /
• 2007

The nitriding and post-sintering behavior of silicon powder compact containing sintering additives of 2.3 wt% and 7 wt% were investigated in this study. Regardless of the liquid phase content, elongated large grains of a typical morphology evolved in the post-sintered specimens. Phase analysis revealed a complete phase transformation into ${\beta}-Si_3N_4$ in both porous systems. Oxynitride second phases (mellilite) precipitated in the latter, while those were free in the former containing less amount of liquid phase. The post-sintering condition that yielded a favorable microstructure for a filter application was achieved when the specimens were soaked at $1800^{\circ}C$ for 2 h. It was found that the thermal conductivity of porous $Si_3N_4$ ceramics is dominated by the porosity more than this factor is influenced by the addition of $Al_2O_3$.

• 전기의세계
• /
• v.29 no.8
• /
• pp.532-537
• /
• 1980

Effect of Argon and Sulfur hexafloride in the transformer oil are experimented under non-uniform A.C. electric field. The result has shown that the corona frequency and corona charge quantity in liquid dielectrics were varied with gas condition in the oil and affected by the additives. SF$_{6}$ that has the effects of pressure and electrical negative characteristic is the most effective. The corona is considered to be the breakdown of bubble produced by gas contained in the oil or by dissociated ion of the oil molecules.s.

• Tribology and Lubricants
• /
• v.5 no.2
• /
• pp.87-93
• /
• 1989

The effect of the Concentration of solid lubricant, MoS$_2$ alone and in presence of other additives, ZDDP and DEP on the wear characteristics of liquid lubricants has been studied using the Four Ball Wear tester and Falex E.P. tester. On the basis of the experimental result, it showed that the concentration of MoS$_2$ and compatibility with other additives is very cbncerned with wear performance.

• Journal of Information Display
• /
• v.5 no.2
• /
• pp.27-38
• /
• 2004

We describe dried oriented films with anisotropic structural and optical properties prepared from the aqueous solutions of plank-like molecules, the so-called Lyotropic Chromonic Liquid Crystals (LCLCs). The dried LCLC films may be used as optical elements, such as polarizers, compensators, color filters, or retardation plates in the UV, visible, or infrared parts of spectrums. The optical quality of the films is determined by the uniformity of the molecular alignment, which often distorted by periodic variations of the director field. We describe different ways to improve the alignment properties of the films by using additives. We present compositions capable of polarizing effects in visible and UV parts of spectrum.

• Membrane Journal
• /
• v.5 no.1
• /
• pp.44-57
• /
• 1995

A mathematical model was proposed to describe the behavior of the liquid emulsion membrane(LEM) conraining sodium carbonate as internal stripping reagent. Experimental results of the batch extraction of lactic acid were compared with computed results by using the model. it was found that the model computations could predict fairly well the effects of parameter variations such as the carrier concentration, the stripping reagent concentration, the stirrer speed and the treatment ratio. An attempt has been made to reduce emulsion swelling which is one of the main problem of LEM. As the additives for swelling control, liquid paraffin, n-decanol, cyclohexanone and Span 85 were used. All the additives that were investigated tend to reduce the quantity of swelling to some extent. Cyclohexanone was found not only to reduce the swelling but also to increase largely the acid transport rate.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1991.10a
• /
• pp.37-39
• /
• 1991

This paper is studies the effects of additives on the magnetic properties of Sr-ferrite. The specimens have been composed of SrO and Fe$_2$O$_3$with ratio of 1:5.9. As 1st additives, it is mixed to 0.2wt%, 0.7wt% and 1wt% of CaCo$_3$with 0.3wt% SiO$_2$. As 2nd addition, it is mixed to 0.5wt%, 1wt% of Na$_2$SiO$_3$, 0.5wt%, 1wt% of Cr$_2$O$_3$and 0.5wt%, 1wt% of Al$_2$O$_3$and sintering conditions was carried out at 1210$^{\circ}C$, 1230$^{\circ}C$ and 1250$^{\circ}C$. From experiments on the magnetic properties of specimen, the results were shown follows; (1) In case of additive SiO$_2$and CaO, it is stable magnetoplumbite structure for liquid phase grown, enhances mignetic propertics. (2) In case of basic compositions + 0.5wt% Al$_2$O$_3$, it is confirmed better properties by increasing of the coercivity than 0.5wt% Cr$_2$O$_3$additives. (3) In case of mixed additives of Cr$_2$O$_3$and Al$_2$O$_3$, magnetic propeties decrease with sintering density.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.04a
• /
• pp.220-224
• /
• 2009

The effect of addition of single and binary additives on the performance of dye-sensitized $TiO_2$ solar cells based on 1,2-dimethyl-3-propylimidazolium iodide (DMPII) in ethylene carbonate (EC) and gamma-butyrolactone (GBL) has been evaluated at different cell temperatures in the $30-120^{\circ}C$ range. The electrolyte containing a single additive, 2-(dimethylamino)-pyridine (DMAP) showed best performance, which showed further enhancement for an electrolyte containing binary additives, DMAP and 5-chloro-1-ethyl-2-methylimidazole (CEMI) in equal molar ratio. The performance of the dye sensitized solar cell (DSC) based on electrolyte containing binary additives were found to be better than an acetonitrile based electrolyte. The dependence of different photovoltaic parameters (Voc, Jsc, ff, n) of the DSC upon temperature has been studied over the $30-120^{\circ}C$ range and only a small decrease in conversion efficiency has been observed. Thus the electrolyte containing binary additives (DMAP, CEMI) in EC/GBL solvent and show better performance in the investigated temperature range ($30-120^{\circ}C$).

• Journal of the Korean Ceramic Society
• /
• v.46 no.5
• /
• pp.467-471
• /
• 2009

Effects of boron and carbon on the densification and thermal decomposition of an AlN-SiC-$TiB_2$ system were investigated. $SiO_2$ was mostly removed by the addition of carbon, while $Al_2O_3$ formed $Al_4O_4C$ and promoted the densification of the systems above $1850^{\circ}C$. Rather porous specimens were obtained without the additives after hot pressing at $2100^{\circ}C$, while densification was mostly completed at $2000^{\circ}C$ by using the additives. The sintering temperature decreased further to $1950^{\circ}C$ by applying spark plasma sintering. The additives promoted the shrinkage of AlN by forming a liquid phase which was originated from the carbo- and boro-thermal reduction of $Al_2O_3$ and AlN.