• Applied Chemistry for Engineering
• /
• v.26 no.5
• /
• pp.593-597
• /
• 2015

Tricyclopentadiene (TCPD) as a next generation high density fuel was synthesized by Diels-Alder oligomerization reaction of DCPD. TCPD was prepared by ionic liquid (IL) catalysts with combination of cationic and anionic precursors. Two kinds of anionic precursors such as copper(I) chloride (CuCl) and iron(III) chloride ($FeCl_3$) and cationic precursors such as triethylamine hydrochloride (TEAC) and 1-butyl-3-methylimidazolium chloride (BMIC) were used. The preparation of TCPD using IL catalyst was superior to that using Diels-Alder reaction in terms of DCPD conversion and TCPD yield. In addition, TCPD yield was correlated with Lewis acidity by changing the ratio of anionic and cationic precursors. The TCPD yield was higher when using CuCl as anionic precursor than that of using $FeCl_3$. Control of Lewis acidity by changing the molar ratio of anionic and cationic precursors could further improve TCPD yield as well.

• Journal of the Korean Vacuum Society
• /
• v.22 no.6
• /
• pp.306-312
• /
• 2013

Single-crystalline InSb nanowire was synthesized on $SiO_2$ wafer via vapor-liquid-solid (VLS) mechanism using chemical vapor deposition method. According to the source container system (open or close) which contain InSb powder and $SiO_2$ wafer, the single-crystalline InSb nanowires have different growth mechanisms. Structural characterization of the InSb nanowires was examined by scanning electron microscope (SEM). Composition of the nanowires was investigated using x-ray diffraction (XRD) and energy dispersive x-ray spectroscopy (EDS). This study demonstrates that length and diameter of the InSb nanowires are long and thick using open-boat system by VLS and additional vapor-solid (VS) mechanisms, because open-boat system can carry a large amount of vapor-phase InSb precursor than close-boat system.

• Journal of Life Science
• /
• v.26 no.11
• /
• pp.1259-1268
• /
• 2016

In this study, we investigated antimicrobial peptide from the acidified muscle extract of Mytilus coruscus, which mostly inhabits China, Japan, and Korea, to develop a natural product-derived antibiotics substitution in terms of its abuse and restriction. Antimicrobial peptide was purified by $C_{18}$ reversed-phase high-performance liquid chromatography and was detected as having a molecular mass of 6,701 Da by MALDI-TOF/MS. The N-terminal amino acid sequence of the purified peak was obtained from edman degradation, and 20 identified residues shown 100% identity with the N-terminus region of sperm-specific protein and protamine-like PL-II/PL-IV precursor of Mytilus californianus. We also identified 60 open-reading frame (ORF) encoding amino acids with 183 bp of purified peptide based on the obtained amino acid residues. The amino acid sequence of ORF showed 100% and the nucleotide sequence revealed 97.2% identity with the protamine-like PL-II/PL-IV precursor of Mytilus californianus. Synthesized antimicrobial peptide showed antimicrobial activity against gram-positive bacteria, including Bacillus cereus (minimal effective concentration [MEC], $20.8{\mu}g/ml$), Bacillus subtilis (MEC, $0.2{\mu}g/ml$), Streptococcus mutans (MEC, $0.2{\mu}g/ml$), gram-negative bacteria including Pseudomonas aeruginosa (MEC, $5.7{\mu}g/ml$), Escherichia coli (MEC, $2.6{\mu}g/ml$) and fungi, Candida albicans (MEC, $56.3{\mu}g/ml$). In addition, synthesized peptide showed stable activities under heat and salt conditions against gram-positive and gram-negative bacteria, but was inhibited by salt against only C. albicans. With these results, isolated peptide from M. coruscus could be an alternative agent to antibiotics for defending against pathogenic microorganisms, and helpful information to understand the innate immune system of marine invertebrates.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.362-362
• /
• 2014

Atomic layer deposition (ALD) can be regarded as a special variation of the chemical vapor deposition method for reducing film thickness. ALD is based on sequential self-limiting reactions from the gas phase to produce thin films and over-layers in the nanometer scale with perfect conformality and process controllability. These characteristics make ALD an important film deposition technique for nanoelectronics. Tantalum pentoxide ($Ta_2O_5$) has a number of applications in optics and electronics due to its superior properties, such as thermal and chemical stability, high refractive index (>2.0), low absorption in near-UV to IR regions, and high-k. In particular, the dielectric constant of amorphous $Ta_2O_5$ is typically close to 25. Accordingly, $Ta_2O_5$ has been extensively studied in various electronics such as metal oxide semiconductor field-effect transistors (FET), organic FET, dynamic random access memories (RAM), resistance RAM, etc. In this experiment, the variations of chemical and interfacial state during the growth of $Ta_2O_5$ films on the Si substrate by ALD was investigated using in-situ synchrotron radiation photoemission spectroscopy. A newly synthesized liquid precursor $Ta(N^tBu)(dmamp)_2$ Me was used as the metal precursor, with Ar as a purging gas and $H_2O$ as the oxidant source. The core-level spectra of Si 2p, Ta 4f, and O 1s revealed that Ta suboxide and Si dioxide were formed at the initial stages of $Ta_2O_5$ growth. However, the Ta suboxide states almost disappeared as the ALD cycles progressed. Consequently, the $Ta^{5+}$ state, which corresponds with the stoichiometric $Ta_2O_5$, only appeared after 4.0 cycles. Additionally, tantalum silicide was not detected at the interfacial states between $Ta_2O_5$ and Si. The measured valence band offset value between $Ta_2O_5$ and the Si substrate was 3.08 eV after 2.5 cycles.

• Journal of the Korean Chemical Society
• /
• v.33 no.3
• /
• pp.326-331
• /
• 1989

Superconducting fiber of high Tc $YBa_2Cu_3O_{7-{\sigma}}$ was successfully prepared by the sol-gel method. The stoichiometric mixture of Y, Ba and Cu nitrates was dissolved in water, to which citric acid solution was added. Then ammonium hydroxide was added to the mixture in order to increase the pH to a value between 5.8 and 6.2. The mixture was heated carefully to form a homogeneous colloid sol at 358 K. The solution was viscous enough to draw a long gel fiber, which was then heated at 1223K for 8 hrs. under oxygen partial pressure of $Po_2$ = 1 atm., cooled slowly and annealed at 723K for 13 hrs.. The reacted superconducting sample maintained a fiber form with some shrinkage of its volume. The superconducting transition temperatures (Tc, onset and Tc, offset) of $YBa_2Cu_3O_{7-{\sigma}}$ have been determined to be approximately 95K and 82K, respectively. The superconducting phase was also confirmed by Meissner effect at liquid nitrogen boiling temperature.

• Korean Journal of Microbiology
• /
• v.26 no.4
• /
• pp.283-290
• /
• 1988

A spontaneous revertant of mutation rbsB103 that is ribose taxis-positive was characterized. This revertant was found to be export-competent in the export of ribose-binding protein shown by the disappearance of accumulated mutant precursor protein and the export of mature ribose-binding protein to the periplasm. The reversional change was shown to be in the region of risB gene that codes for the amino terminal portion of ribose-binding protein. Analysis by high-performance liquid chromatography of peptide patterns of ribose-binding proteins confirmed the relationship between the wild-type and the revertant proteins as shown for the mutant previously (Iida et al., 1985). When the processing rate of presursor proteins from the wild type and the revertant strain in vivo was compared by pulse-chase experiment, it was found that processing is less efficient than normal in the revertant. Purified mature proteins from both wild-type and revertant were subjected to amino acid sequencing. The results confirmed the amino acid changes deduced from the DNA sequencing and showed that processing of the revertant precursor occured in the correct position even though there are two different amino acids present in the signal sequence.

• Resources Recycling
• /
• v.30 no.1
• /
• pp.44-52
• /
• 2021

This study investigated the effect of the type of alkaline precipitant used on the synthesis of lithium hydroxide by examining the behavior of lithium hydroxide produced using lithium sulfate recovered from a waste lithium secondary battery as a raw material. The double-replacement reaction (DRR) process was used to remove the impurities contained in the lithium salt precursor of lithium sulfate and to improve the efficiency of the synthesis of lithium hydroxide. The experiment was conducted by control the molar ratio of the precursor ([Li]/[OH]), the reaction temperature, and the composition of the alkaline precipitant (KOH, Ca(OH)2, Ba(OH)2) used for the production of highly-crystalline lithium hydroxide. A secondary solid-liquid separation was performed following the reaction to remove the impurities generated, and the purified aqueous solution of lithium hydroxide was evaporated to remove the moisture and obtain the product as a powder. The crystallinity and synthesis behavior of the product were examined.

• Analytical Science and Technology
• /
• v.21 no.6
• /
• pp.535-542
• /
• 2008

A liquid chromatography-electrospray ionization tandem mass spectrometry (LC-ESI/MS/MS) method was developed for the determination and confirmation of clenbuterol in bovine muscle and milk. Clenbuterol and clenbuterol-D9 using as an internal standard in samples were extracted with ethyl acetate after hydrolysis and evaporated to dryness. The extracts were dissolved in 20% methanol and cleaned using HLB solid-phase extraction cartridge. The analytes were detected by LC-ESI/MS/MS on a $C_{18}$ column. Mass spectral acquisition was done in selected reaction monitoring (SRM) in positive ion mode to provide a high degree of sensitivity. Using MS/MS with SRM mode, the transitions (precursor to product) monitored were m/z 277${\rightarrow}$203 for clenbuterol, and m/z 286${\rightarrow}$204 for internal standard. The limits of quantitation (LOQ) and mean recoveries of clenbuterol in bovine muscle were $0.2{\mu}g/kg$ and 84.3~91.1%, respectively. The LOQ and mean recoveries in milk were $0.05{\mu}g/kg$ and 87.7~98.3%, respectively.

• Analytical Science and Technology
• /
• v.20 no.4
• /
• pp.331-338
• /
• 2007

Licorice, Glycyrrhizae Radix is widely used as a herbal medicines and a dietary supplements in East Asia. We employed high performance liquid chromatography electrospray ionization tandem mass spectrometry to determine liquiritin and glycyrrhizin in the Glycyrrhizae Radix. Liquiritin and glycyrrhizin in Glycyrrhizae Radix were ionized by positive ion pneumatically assisted electrospray and detected by HPLC-MS/MS in the multiple-reaction monitoring (MRM) mode using precursor ${\rightarrow}$ product ion combinations at m/z $436.2{\rightarrow}257.0$ and $823.4{\rightarrow}453.4$, respectively. The assay had a calibration range from 10 to 3,000 ng/mL. The limits of detection (LOD) of the liquiritin and glycyrrhizin were 0.4 ng/mL and 0.01 ng/mL, respectively. The reproducibility and repeatability (relative standard deviation) at different analyte concentrations varied from 103 to 113 % and 0.95 to 1.8 %, respectively. According to the above results, HPLC-MS/MS method permits assignment of tentative structures such as liquiritin and glycyrrhizin in the Glycyrrhizae Radix.

• Clean Technology
• /
• v.24 no.4
• /
• pp.371-379
• /
• 2018

The objective of this study is to develop a platinum/hexaaluminate pellet catalyst for the decomposition of eco-friendly liquid propellant. Pellet catalysts using hexaaluminate prepared by ultrasonic spray pyrolysis as a support and platinum as an active metal were prepared by two methods. In the case of the pellet catalyst formed by loading the platinum precursor onto the hexaaluminate powder and then adding the binder (M1 method catalyst), the mesopores were well developed in the catalyst after calcination at $550^{\circ}C$. However, when this catalyst was calcined at $1,200^{\circ}C$, the mesopores almost collapsed and only a few macropores existed. On the other hand, in the case of a catalyst in which platinum was supported on pellets after the pellet was produced by extrusion of hexaaluminate (M2 method catalyst), the surface area and the mesopores were well maintained even after calcination at $1,200^{\circ}C$. Also, the catalyst prepared by the M2 method showed better heat resistance in terms of platinum dispersion. The effects of preparation method and calcination temperature of Pt/hexaaluminate pellet catalysts on the decomposition of liquid propellant composed mainly of ammonium dinitramide (ADN) or hydroxyl ammonium nitrate (HAN) were investigated. It was confirmed that the decomposition onset temperature during the decomposition of ADN- or HAN- based liquid propellant could be reduced significantly by using Pt/hexaaluminate pellet catalysts. Especially, in the case of the catalyst prepared by the M2 method, the decomposition onset temperature did not show a large change even when the calcination temperature was raised at $1,200^{\circ}C$. Therefore, it was confirmed that Pt/ hexaaluminate pellet catalyst prepared by M2 method has heat resistance and potential as a catalyst for the decomposition of the eco-friendly liquid propellants.