• Korean Journal of Food Science and Technology
• /
• v.11 no.4
• /
• pp.304-313
• /
• 1979

The compositions of the polar lipids in the free and bound lipids from four varieties of experimentally cultivated potatoes were identified and quantified by thin layer- and gas-liquid chromatographies. The results were summarized as follows : 1. The glycolipids contained in the free and bound lipids were fractionated and identified as esterified sterol glycoside, monogalactosyl diglyceride, sterol glycoside, digalactosyl diglyceride, and trigalactosyl diglyceride, of which the highest content to the total lipid quantity were 5.8% of esterified sterol glycoside in the free lipid and 6.1% of trigalactosyl diglyceride in the bound lipid. The content of monogalactosyl diglyceride in the free and bound lipids was almost the same, whereas the content of esterified sterol glycoside was higher in the free lipid than in the bound lipid, and the contents of sterol glycoside, digalactosyl diglyceride, and trigalactosyl diglyceride were higher in the bound lipid than in the free lipid on the contrary. 2. The phospholipid contained in the free and bound lipids were fractionated and identified as phosphatidyl ethanolamine, phosphatidyl glyceride, phosphatidyl choline, and phosphatidyl inositol, but the phosphatidyl glyceride was not detected in the free lipid. The highest content in the total lipid quantity was 3.3 % of phosophatidyl choline in the case of the free lipid, while 14.9 % of the phosphatidyl ethanolamine contained in the bound lipid was the highest. All other constituents of phospholipid were contained in larger quantity in the bound lipid than in the free lipid. 3. The fatty acid composition of glycolipid in the free and bound lipids was also the same as that of the total free and bound lipids. The differences were that the content of palmitic acid was higher in the glycolipid of the free lipid than in the total free lipid and the content of linoleic acid was lower in the glycolipid.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.1-2
• /
• 2011

Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.6
• /
• pp.1687-1698
• /
• 2021

This study is to produce multiple layers of liposomes in a supercritical state and encapsulates active ingredients in order to stably encapsulate thermodynamically unstable active ingredients. In order to form a liposome in a supercritical state, a mixed surfactant development including vegetable-derived hydrogenated phosphatidyl choline and their delivative, hydrogenated sucrose distearate was synthesized as high purity. It describes a manufacturing method of injecting liquid carbon dioxide into a reactor to create a supercritical state and stirring to produce a giant liposome, and adding and loading genistein and quercetin. The HLB of the mixed lipid complex (SC-Lipid Complex) was 12.50, and multiple layers of liposome vesicles were formed even at very low concentrations. This surfactant had a specific odor with a pale yellow flake, the specific gravity was 0.972, and the acid value was 0.12, indicating that it was synthesized with high purity. As a result of the emulsifying capacity experiment using 20 wt% capric/capric triglyceride and triethylhexanoin using SC-Lipid Complex, it was found to have 96.2% emulsifying power. SC LIPOSOME GENISTEIN was confirmed that a multi-layer liposome vesicle was formed through a transmission electron microscope (Cryo-TEM) for the supercritical liposome encapsulated with genistein. The primary liposome particle size in which genistein was encapsulated was 253.9 nm, and the secondary capsule size was 18.2 ㎛. Using genistein as the standard substance, the encapsulation efficiency of supercritical liposomes was 99.5%, and general liposomes were found to have an efficiency of 93.6%. In addition, the antioxidant activity experiment in which quercetin was sealed was confirmed by the DPPH method, and it was found that the supercritical liposome significantly maintained excellent antioxidant activity. In this study, thermodynamically unstable raw materials were sealed into liposomes without organic solvents in a supercritical state. Based on these results, it is expected that it can be applied to various forms such as highly functional skincare cosmetics, makeup cosmetics, and scalp protection cosmetics.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.spc
• /
• pp.30-36
• /
• 2022

A sensor is needed to continuously and automatically measure the change in HNS concentration in industrial facilities that directly discharge to the sea after water treatment. The basic function of the sensor is to be able to detect ppb levels even at room temperature. Therefore, a method for increasing the sensitivity of the existing sensor is proposed. First, a method for increasing the conductivity of a film using a conductive carbon-based additive in a nanoparticle thin film and a method for increasing ion adsorption on the surface using a catalyst metal were studied.. To improve conductivity, carbon black was selected as an additive in the film using ITO nanoparticles, and the performance change of the sensor according to the content of the additive was observed. As a result, the change in resistance and response time due to the increase in conductivity at a CB content of 5 wt% could be observed, and notably, the lower limit of detection was lowered to about 250 ppb in an experiment with organic solvents. In addition, to increase the degree of ion adsorption in the liquid, an experiment was conducted using a sample in which a surface catalyst layer was formed by sputtering Au. Notably, the response of the sensor increased by more than 20% and the average lower limit of detection was lowered to 61 ppm. This result confirmed that the chemical resistance sensor using metal oxide nanoparticles could detect HNS of several tens of ppb even at room temperature.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.18 no.2
• /
• pp.149-156
• /
• 1985

Distribution of lipid components in the tissue of meat, skin and viscera from carp(Cyprynus carpio) was analyzed using the techniques of column chromatography, thin layer chromatography and gas liquid chromatography according to the previous report(Choi, et al., 1984). Lipid content was varied by the portion such as $3.88\%$ in meat (free lipid, $2.47\%$ ; bound lipid, $1.41\%$), $8.02\%$ in skin(free lipid, $5.65\%$ ; bound lipid, $2.37\%$) and $6.18\%$ in viscera (free lipid, $3.54\%$ ; bound lipid, $2.64\%$). In the all portions of the body, free lipid was composed of $68\%\;to\;92\%$ in neutral lipid, $3\%\;to\;6\%$ in glycolipid and $4\%\;to\;18\%$ in phospholipid whereas bound lipid was composed of $8\%\;to\;20\%$ in neutral lipid, $2\%\;to\;7\%$ in glycolipid and $47\%\;to\;62\%$ in phospholipid. The free lipids of the tissues on the each portion were mostly represented by triglycerides and some diglycerides, but free lipids in viscera contained considerable amounts of free fatty acids. The bound lipids, on the other hand, commonly comprised appreciable amounts of esterified sterol and hydrocarbon, and triglycerides. The phospholipid was mainly consisted of phosphatidyl choline, phosphatidyl ethanolamine and phosphatidyl serine in the both free and bound lipids, and much more phosphatidyl choline in the bound lipid. The predominant fatty acids of free and bound lipids were $C_{16:0},\;C_{18:0},\;C_{20:4},\;C_{22:6}\;and\;C_{18:2}$ acids in polar lipids, and $C_{16:0},\;C_{16:1},\;C_{18:0},\;C_{18:1}\;and\;C_{18:2}$ acids in non-polar lipids, whereas those of neutral lipids were $C_{14:0}(2.54{\sim}6.98\%),\;C_{16:0}(11.20{\sim}21.13\%)$ and $C_{18:0}(1.58{\sim}12.76\%)$ of saturated acids, $C_{16:1}(7.06{\sim}20.70\%),\;C_{18:1}(21.68{\sim}30.50\%)$ and $C_{20:1}(1.76{\sim}6.27\%)$ of monoenoic acids, and $C_{18:2}(4.50{\sim}6.89\%),\;C_{20:4}(1.52{\sim}4.29\%)$ and $C_{22:6}(0.73{\sim}6.62\%)$, respectively. In conclusion, the fatty acid compositions revealed apparent differences between the free lipid and bound lipids in the tissues of body.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.16 no.4
• /
• pp.350-363
• /
• 1987

This study dealt with the comparison of the individual lipid component and fatty acid composition in the six varieties of dent corn, Zea mays Indentata. The fatty acid and sterol compositions of the total lipid were analyzed by gas liquid chromatography. The total lipid was also fractionated into three lipid classes namely neutral, glyco and phospolipid by the methods of silicic acid column chromatography. The lipid componets of lipid-classes were estimated by thin layer chromatography and TLC-scanner. The contents of total lipid in six varieties of Cdent corn were $3.7{\sim}5.3%$. Total lipid were mainly Composed of triglyceride$(69.8{\sim}75.7%)$ free fatty acid$(13.0{\sim}17.9%)$, lanosterol$(4.8{\sim}6.0%)$. hydrocarbon & esterified sterol$(3.5{\sim}6.0%)$, and polar lipid & pigment$(2.7{\sim}5.9%)$. The contents of triglycerde in $Chech'{\breve{o}}nok$ and Hwangok No.3 were slightly higher then other varieties. The major fatty acid In total lipid from six varieties of dent corn were chiefly consisted of linoleic$(46.0{\sim}61.4%)$, oleic$(21.9{\sim}29.9%)$ and palmitic acid$(10.9{\sim}16.7%)$. Particularly the content of linoleic acid in $Chech'{\breve{o}}nok$ was higher but oleic and palmitic acid in $Chech'{\breve{o}}nok$ were less than other varieties. The compositions of 4-desmethylsterol were mainly composed of siterol $(44.0{\sim}63.2%)$, campestetel$(11.6{\sim}15.5%)$ and stigmasterol$(5.6{\sim}9.1%)$. The content of sitosterol in Chinjuok was higher than other varieties and isofucosterol was detected only in Chinjuok. The compositions of 4-monomethlysterol were mainly composed of obtusifoliol$(17.7{\sim}37.6%)$, gramisterol$(15.0{\sim}27.0%)$ and citrostadienol$(9.1{\sim}17.3%)$. The contents of obtusifoliol and citrostadienol in Kwangok and Chinjuok were less than other varieties. The contents of fractionated neural lipid in Suwon No.19. Kwangok, $Hoengs{\breve{o}}ngok$ and Chinjuok$(90.3{\sim}97.1%)$ were higher than those of $Chech'{\breve{o}}nok$ and Hwangok No.3$(85.5{\sim}86.1%)$. Neutral lipid were mainly composed of triglyceride$(24.7{\sim}80.0%)$, lanosterol$(6.2{\sim}20.2%)$, Cholesterol$(1.0{\sim}50.6%)$, free fatty acid$(4.4{\sim}8.9%)$ and esterified sterol$(1.5{\sim}15.9%)$. The major fatty acid in neutral lipid from six varieties of dent corn were chiefly consisted of linoleic$(26.2{\sim}55.4%)$ oleic$(22.7{\sim}39.1%)$ and palmitic acid$(11.4{\sim}41.6%)$. Particularly the contents of linoleic acid Suwon No.19 and $Chech'{\breve{o}}nok$ were higher but palmtic acid in Suwon No.19 and $Chech'{\breve{o}}nok$ were less tan other varieties. Glycolipd were mainly composed of nlonoglycosflsterol $(17.5{\sim}56.4%)$, monoglycosylce-ramide $(8.2{\sim}25.9%)$ and monoglycoslydiacylglycerol$(12.4{\sim}22.2%)$. The contents of mono-g1ycosrlceramide and monoglycosrlsterol in Chinjuok. Were higher than other varieties. The major fatty acid in glycolipid from six varieties of dent corn were chiefly consisted$(14.6{\sim}39.3%)$, palmitic$(20.0{\sim}26.1%)$, linoleic$(3.6{\sim}26.9%)$ and heptadecanoic acid $(3.3{\sim}24.7%)$. Particutarly the cantents of oleic acid in Chinjuok and heptadecanoic acid in $Chech'{\breve{o}}nok$ were higher than other varieties. Phospholipid were mainly composed of phosphatidyllnositol$(30.9{\sim}86.4%)$ and phosphatidylcholine$(4.5{\sim}22.0%)$. The contents of phosphatidrlinositol in $Hoengs{\breve{o}}ngok$ and Hwanngok No. 3 were less than other varieties. The major fatty acid in phospolipid from six varieties of dent corn chiefly consisted of patmitic$(37.2{\sim}61.6%)$ heptadecanoic$(9.2{\sim}31.8%)$ and oleic acid$(4.3{\sim}17.2%)$. Particuiarlr the content of oleic acid in $Hoengs{\breve{o}}ngok$ was higher but heptadccanoic acid in $Hoengs{\breve{o}}ngok$ was less than othcr varieties.