• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.330-330
• /
• 2008

It is widely investigated to liquid crystal (LC) alignment using non-contact alignment method such as ion-beam (IB) irradiation, UV alignment, and oblique deposition. Because conventional rubbing method has some drawbacks. These include defects from dust and electrostatic charges and rubbing scratch during rubbing process. In addition, rubbing method needs additional process to remove these defects. Therefore rubbing-free methods like ion-beam irradiation are strongly required. We studied LC alignment effect on poly imide surface by IB irradiation and electro-optical (EO) characteristics of twisted nematic liquid crystal display (TN-LCD). In this experiment, a good uniform alignment of the nematic liquid crystal (NLC) with the ion-beam exposure on the polyimide (PI) (SE-150 from Nissan Chemical) surface was observed. We also achieved low pretilt angle as a function of ion-beam irradiation intensity. In addition, it can be obtained the good EO properties of the IB-aligned TN-LCD on PI surface. Some other experiments results and discussion will be included in the poster.

• Transactions on Electrical and Electronic Materials
• /
• v.10 no.1
• /
• pp.16-19
• /
• 2009

We have studied the liquid crystal alignment properties for various alignment methods on the homogeneous polyimide surface. Suitable liquid crystal alignment for one-side alignment cell on the polyimide surface by all alignment method was observed. Highly pre-tilt angle of the NLC for both-side rubbing cell was measured. But, low pre-tilt angle of the NLC for one-side ion beam and UV irradiation cell was observed. We consider that the pre-tilt angle of NLC for one-side ion beam and UV irradiation on the PI surface is lower than that of the PI surface with rubbing. Also, the suitable transmittance-voltage curves for the one-side rubbing TN-LCD on the PI surface with one-side UV irradiation were measured. Also, good response time characteristics of the one-side rubbing TN-LCD on the polyimide surface with one-side UV irradiation can be measured.

• Journal of Information Display
• /
• v.10 no.4
• /
• pp.180-183
• /
• 2009

A stamping-assisted rubbing technique for generating bidirectional alignment in the fabrication of wide-viewing twistednematic (TN) liquid crystal displays (LCDs) was developed. A patterned layer of a fluorinated acrylate polymer was transferred onto the first rubbed alignment layer prepared on a substrate by stamping. The fluorinated acrylate polymer provides a protective layer that covers the first alignment layer during the second rubbing process to facilitate the bidirectional alignment of the LC molecules. The LC cell in the twisted geometry with two bidirectional-alignment layers showed stable electro-optic properties and wide-viewing characteristics. The stamping-assisted rubbing technique serves as a mask-free alignment method of producing multidomains for wide-viewing LCDs.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.346-349
• /
• 2001

We studied the nematic liquid crystal (NLC) aligning capabilities using the new alignment material of diamond like carbon (DLC) thin film. A high pretilt angle of about $4^{\circ}$ was measured by ion beam(IB) exposure on the DLC thin film surface. A good LC alignment was observed by the IB alignment method on the DLC thin film surface at annealing temperature of $200^{\circ}C$, and the alignment defect of the NLC was observed above annealing temperature of $220^{\circ}C$. Consequently, the high NLC pretilt angle and the good thermal stability of LC alignment can be achieved by the IB alignment method on the DLC thin film surface.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.533-536
• /
• 1999

In this study, we investigated pretilt angle generation and liquid crystal alignment by UV light irradiation during imidization of polyimide. Generated pretilt angle of NLC by using in-situ UV photo-alignment method was smaller than that of the conventional UV photo-alignment method. Also, generated pretilt angle of NLC tends to increase by annealing. We found that in-situ UV photo-alignment method has higher thermal stability of LC alignment, but it has a disadvantage to control pretilt angle.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.346-349
• /
• 2001

We studied the nematic liquid crystal (NLC) aligning capabilities using the new alignment material of diamond like carbon (DLC) thin film. A high pretilt angle of about 4$^{\circ}$ was measured by ion beam(IB) exposure on the DLC thin film surface. A good LC alignment was observed by the IB alignment method on the DLC thin film surface at annealing temperature of 200$^{\circ}C$, and the alignment defect of the NLC was observed above annealing temperature of 220$^{\circ}C$ . Consequently, the high NLC pretilt angle and the good thermal stability of LC alignment can be achieved by the IB alignment method on the DLC thin film surface.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.507-510
• /
• 2000

Alignment effects for nematic liquid crystal (NLC) using an in-situ photo-alignment method with obliquely polarized UV exposure on a polyirnide (PI) surface for homeotropic alignment were studied. The high pretilt angle in NLC can be measured by obliquely W exposure of $30^{\circ}$ on the PI surface for 10~20 min. The pretilt angle of NLC generated using the in-situ photo-alignment was higher than that of a conventional photo-alignment method.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.12
• /
• pp.1133-1138
• /
• 1998

In this paper, we obtained the monodomain alignment of nematic liquid Crystal(NLC) in the cell fabricated by transcription alignment method on polyimide(PI) surface with side chain. It is considered that the LC alignment produced by the transcription alignment method is attributed to a memory effect of the NLC on PI surfaces. Also we observed that the generated pretilt angle of NLC is about $3.7^{\circ}$ with transcription alignment on PI surface. Next, we measured that the voltage-transmittance characteristics of transcription-aligned TN-LCD are almost same compared to rubbing-aligned TN-LCD. Also, we measured that the curve of transcription-aligned TN-LCD is less sharp than that of the rubbing-aligend TN-LCD in the decay time characteristics. It is considered that the response time characteristics of transcription-aligned TN-LCD are attributed to the weak anchoring strength between the LC molecules and the polymer surface.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.5
• /
• pp.419-422
• /
• 2002

We studied the nematic liquid crystal (NLC) aligning capabilities using the new alignment material of a diamond like carbon (DLC) thin film. A high pretilt angle of about $3.5^{\circ}$ by ion beam(IB) exposure on the DLC thin film surface was measured. A good LC alignment by the IB alignment method on the DLC thin film surface was observed at annealing temperature of $200^{\circ}C$, and the alignment defect of the NLC was observed above annealing temperature of $220^{\circ}C$. Consequently, the high NLC pretilt angle and the good thermal stability of LC alignment by the IB alignment method on the DLC thin film surface can be achieved.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.838-841
• /
• 2006

Orientational alignment patterns proved that they are very useful for realizing diverse properties of liquid crystals. Here we tried to produce the patterns combining interfered laser light and double irradiations. A photo-isomerizable polymer doped with azo dye, which induce uniform liquid crystal alignment to the uniform laser irradiation, was used as the alignment layer. Double irradiations into two orthogonal directions brought the orientation patterns similar to the checkerboard. It indicates the possibility of bistability on those patterns.