• 수산해양기술연구
• /
• 제56권4호
• /
• pp.407-418
• /
• 2020

Mass mortality of mariculture fish due to high summer temperatures is a major issue in the mariculture industry in many coastal waters of Korea, yet measures to mitigate the impact are generally limited. We injected a micro-bubble of liquefied oxygen into the bottom of rockfish cages (about 6-8 m deep) in order to maximize the dispersal of micro-bubbled seawater and reduce fish mortality. The injection of low-temperature oxygen in micro-bubbles lowered the water temperature at the injection area by as much as 1℃ and increased dissolved oxygen concentration by 0.5 ppm. In early August, following a week with persistent high water temperature (above 28.5℃), there was an increase in fish mortality despite the micro-bubble system, which resulted in approximately 7% death of the total introduced fish population. However, this mortality appeared to be much lower than mortality reported in a neighboring mariculture facility (approximately 50% mortality). We also estimated the volume that can be recirculated with pumped seawater using a micro-bubble system. We suggest that this approach of injecting liquefied oxygen through a micro-bubble system may reduce fish mortality during high temperature periods.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2211-2216
• /
• 2007

Liquefied gas vaporizer means machine to vaporize the liquefied gas as liquid nitrogen($LN_2$), liquefied natural gas(LNG), liquid oxygen($LO_2$) etc. In the air type vaporizer, the frozen dew is also created by temperature drop (below 273 K) on vaporizer surface. This problem increases as the time progresses and humidity increases. In addition, the frozen dew gradually becomes frost deposit consequently, heat transfer through vaporizer decreases because frost deposit form adiabatic sheet. Because of this reason, recent vaporizer system is installed as parallel type, this vaporizer system needs more expensive installation costs and more space. This paper was investigated on the heat transfer characteristics of liquefied gas vaporizer with super low temperature and this paper was carried out the numerical about air heating vaporizer with super low temperature. The numerical analysis on the heat transfer was studied on the effect of geometric parameters of the vaporizer, which are length 1000 mm of 4fin75le type vaporizer. 4fin75le means number of fin is 4 and height of fin is 75 mm.

• 동력기계공학회지
• /
• 제11권3호
• /
• pp.22-28
• /
• 2007

Liquefied gas vaporizer is a machine to vaporize liquefied gas such as liquid nitrogen($LN_{2}$), liquefied natural gas(LNG), liquid oxygen($LO_{2}$) etc. For the air type vaporizer, the frozen dew is created by temperature drop (below 273 K) on vaporizer surface. The layer of ice make a contractions on vaporizer. The structure analysis on the heat transfer was studied to see the effect of geometric parameters of the vaporizer, which are length 1000 mm of various type vaporizer. Structure analysis result such as temperature variation, thermal stress and thermal strain have high efficiency of heat emission as increase of thermal conductivity. As the result, Frist, With-fin model shows high temperature distribution better than without-fin on the temperature analysis. Second, Without-fin model shows double contractions better then with-fin model under the super low temperature load on the thermal strain analysis. Third, Vaporizer fin can be apply not only heat exchange but also a stiffener of structure. Finally, we confirm that All model vaporizer can be stand for sudden load change because of compressive yield stress shows within 280 MPa on thermal stress analysis.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.109-112
• /
• 2001

Water-Electrolyzed gas is a mixed gas of the constant volume ratio 2:1 of Hydrogen and Oxygen gained from electrolyzed water, and it has better characteristics in the field of economy, efficiency of energy, and environmental intimacy than acetylene gas and LPG (Liquefied Petroleum Gas) used for existing gas welding equipment. So studies of Water-Electrolyzed gas are activity in progress nowaday, and commercially used as a source of thermal energy for gas welding in the industry. The object of this paper is getting a V-I characteristic of Hydrogen-Oxygen Gas Generator using DC source. First, chemical analysis of electrolysis is conducted and the relation of electrical energy and then chemical energy is investigated through the faraday's laws.

• International Journal of Aeronautical and Space Sciences
• /
• 제4권2호
• /
• pp.51-60
• /
• 2003

An experimental research program is being undertaken to develop a regeneratively-cooled experimental thrust chamber of liquid rocket engine using liquefied natural gas and liquid oxygen as propellants. Prior to firing test using a regenerative cooling with liquefied natural gas in this program, several firing tests were conducted with water as a coolant. Experimental thrust chambers with a thrust of about 10tf were developed and their firing test facility was built up. Injector used in the thrust chamber was of shear-coaxial type appropriate for propellants of gas and liquid phase and cooling channels are of milled rectangular configuration. Periodical variation of the soot deposition and discoloration was observed through an eyes' inspection on the inner wall of a combustion chamber and a nozzle after each firing test, and an intuitive concept of the periodical variation of mixture ratio near the inner wall of a combustion chamber and a nozzle at once was brought about and analyzed quantitatively. Thermal heat flux to the coolant was calculated and modified with the periodical variation model of mixture ratio, and the increment of coolant temperature at cooling channels was compared with measured one.

• Korean Chemical Engineering Research
• /
• 제50권2호
• /
• pp.353-357
• /
• 2012

액화석유가스(liquefied petroleum gas, LPG)에 디메틸에테르(dimethyl ether, DME)가 첨가된 DME-LPG 혼합연료의 탄화수소 화합물을 가스크로마토그래피(GC)를 이용하여 정성 정량분석하는 새로운 분석방법을 연구하였다. DME-LPG 혼합연료는 함산소화합물(oxygen-containing compound)인 극성의 DME와 비극성물질인 LPG로 구성되어 있기때문에 하나의 GC 컬럼에서 모든 성분을 완전히 분리하기가 어렵다. 따라서 서로 다른 성질의 화합물이나 아주 복잡한 화합물 중 목표물질의 분석에 응용되고 있는 Deans switching 시스템을 도입하였다. 상기 시스템은 두 개의 GC 컬럼 사이에 유체의 압력 제어를 통하여 용출되는 물질의 흐름 방향을 변경시켜주는 기술로서, 이 방법을 이용하여 DME와 LPG를 서로 다른 컬럼에서 분리하여 한번의 시료 주입으로 DME-LPG 혼합연료의 모든 탄화수소 화합물을 정성 정량분석할 수 있었다. 또한 DME 합성과정에서 부산물로 생성될 수 있는 메탄올, 포름산메틸, 에틸메틸에테르 같은 미량성분까지 분석이 가능하였다.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권3호
• /
• pp.447-452
• /
• 2016

It is imperative to develop an effective pathway to depolymerize lignin into liquid fuel that can be used as a bioheavy oil. Lignin can be converted into liquid products either by a solvent-free thermal cracking in the absence air, or thermo-chemical degradation in the presence of suitable solvents and chemicals. Here we show that the solvent-assisted liquefaction has produced promising results in the presence of metal-based catalysts. The supercritical ethanol is an efficient liquefaction solvent, which not only provides better solubility to lignin, but also scavenges the intermediate species. The concentrated sulfuric acid hydrolysis lignin (CSAHL) was completely liquefied in the presence of solid catalysts (Ni, Pd and Ru) with no char formation. The effective deoxy-liquefaction nature associated with scEtOH with aid hydrodeoxygenation catalysts, resulted in significant reduction in oxygen-to-carbon (O/C) molar ratio up to 61%. The decrease in oxygen content and increase in carbon and hydrogen contents increased the calorific value bio-oil, with higher heating value (HHV) of $34.6MJ{\cdot}Kg^{-1}$. The overall process is energetically efficient with 129.8% energy recovery (ER) and 70.8% energy efficiency (EE). The GC-TOF/MS analysis of bio-oil shows that the bio-oil mainly consists of monomeric species such as phenols, esters, furans, alcohols, and traces of aliphatic hydrocarbons. The bio-oil produced has better flow properties, low molecular weight, and high aromaticity.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.419-424
• /
• 2004

we performed the underwater explosion analysis for the liquefied oxygen tank - a kind of fuel tank of a mid-size submarine, and tried to verify the structural safety for this structure. First, we reviewed the theory and application of underwater explosion analysis using Structure-Fluid Interaction technique and its finite element modeling scheme. Next, we modeled the explosive and sea water as fluid elements, the LOX tank as structural elements and the interface between two regions as ALE scheme. The effect on shock pressure and impulse of fluid mesh size and shape are also investigated. As the analysis result, the shock pressure due explosion propagated into the water region and hit the structure region. The plastic deformation and the equivalent stress highly appeared at the web frame and the shock mount of LOX structure, but these values were acceptable for design criteria.

• 한국항공우주학회지
• /
• 제34권2호
• /
• pp.106-111
• /
• 2006

액체로켓엔진의 성능 및 냉각특성 연구를 위한 연소시험장치를 개발하였다. 본 시험장치는 액체산소와 kerosene을 추진제로 사용하는 추력 1.0 KN 이하의 액체로켓엔진의 성능 및 냉각 특성연구가 가능하며, 실제 연소시험을 통해 정상적인 작동을 확인하였다. 향후 액화천연가스와 천연가스를 사용하는 로켓엔진의 시험 및 재생냉각시험이 가능토록 설비 개량을 실시할 예정이다

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제23회 추계학술대회 논문집
• /
• pp.189-192
• /
• 2004

소형 액체로켓엔진의 냉각특성 연구를 위한 연소시험장치를 개발하였다. 본 연소시험장치는 물과 kerosene 냉각이 가능하며, 특히 재생냉각이 가능하도록 설계되었다. 시험에 사용되는 연소기는 혼합기, 점화기, 실린더 및 노즐부가 각각 분리되어 개별 냉각이 가능하도록 설계되었다. 현재 본 연소 시험장치를 이용한 소형 액체로켓엔진의 물 냉각 및 kerosene 냉각 시험이 수행 중에 있으며, 향후 LNG(Liquefied Natural Gas) 및 기체 메탄을 이용한 재생냉각이 가능하도록 시험장치를 개량할 예정이다.