• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.2
• /
• pp.502-511
• /
• 1994

A video deck mechanism is composed of various cams, links, and gears, and it requires precise movement. So kinematic motion between parts should be considered to get desired movement depending on the timing chart which defines movement of each part to get desired mode. Also dynamic effects should be considered to get right tape tension and to estimate motor force required to obtain accurate motion. The design process of the deck mechanism of VCR is explained briefly. The loading block of the deck mechanism is divided into a tape translational group and a brake control group. Each group is modeled for kinematic and dynamic analysis. Finally, two groups are combined together to analyze the loading block of the deck mechanism. Results are used to understand and modify an existing design.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.2
• /
• pp.330-336
• /
• 2002

A quantum-chemical investigation on the conformations and electronic properties of bis[2-{2-methoxy-4,6-di(t-butyl)phenyl}ethenyl]benzenes (MBPBs) as building block for ${\pi}$-conjugate polymer are performed in order to display the effects of t-butyl and methoxy group substitution and of kink(ortho and meta) linkage. The conjugation length of the polymers can be controlled by substituents and kink linkages of backbone. Structures for the molecules, o-, m-, and p-MBPBs as well as unsubstituted o-, m-, and p-DSBs were fully optimized by using semiempirical AM1, PM3 methods, and ab initio HF method with 3-21G(d) basis set. The potential energy curves with respect to the change of single torsion angle are obtained by using semiempirical methods and ab initio HF/3-21G(d) basis set. The curves are similar shape in the molecules with respect to the position of vinylene groups. It is shown that the conformations of the molecules are compromised between the steric repulsion interaction and the degree of the conjugation. Electronic properties of the molecules were obtained by applying the optimized structures and geometries to the ZINDO/S method. ZINDO/S analysis performed on the geometries obtained by AM1 method and HF/3-21G(d) level is reported. The absorption wavelength on the geometries obtained by AM1 method is much longer than that by HF/3-21G(d) level. The absorption wavelength of MBPBs are red shifted with comparison to that of corresponding DSBs in the same torsion angle because of electron donating substituents. The absorption wavelength of isomers with kink(orth and meta) linkage is shorter than that of para linkage.

• The Journal of Economics, Marketing and Management
• /
• v.11 no.5
• /
• pp.1-13
• /
• 2023

Purpose: This study analyzed the factors that increase the satisfaction of local residents' housing and residential environment, and derived implications for housing suppliers and policymakers in local areas. Research design, data and methodology: The analysis method derived latent group types through latent profile analysis, and cross-analysis and covariate variance analysis (ANCOVA) were conducted to analyze the differences between these groups. Results: The analysis results are as follows. First, there are four potential group types: good neighborhood facilities and low-level surrounding environment 1 group, low-level neighborhood facilities and good surrounding environment 2 groups, overall low-level 3 groups, and overall high-level 4 groups. Second, groups 1 and 3 tend to live in relatively old apartments. Third, as a result of distributed analysis, groups with low accessibility to neighborhood facilities but good environmental conditions and groups with high overall levels had relatively high housing satisfaction. Conclusions: As an implication, we discussed the need for development that highlights natural environment-friendly characteristics as well as access to neighborhood facilities. In addition, in order to derive more specific implications, the direction of follow-up studies considering job linkage and the effects of specific and various environmental factors was presented together.

• Journal of Aquaculture
• /
• v.17 no.1
• /
• pp.69-80
• /
• 2004

The objective of the present study was to analyze genetic distances, variation and characteristics of individuals in rainbow trout, Oncorhynchus mykis using amplified fragment length polymorphism (AFLP) method as molecular genetic technique, to detect AFLP band patterns as genetic markers, and to compare the efficiency of agarosegel electrophoresis (AGE) and polyacrylamide gel electrophoresis (PAGE), respectively. Using 9 primer combinations, a total of 141 AFLP bands were produced, 108 bands (82.4%) of which were polymorphic in AGE. In PAGE, a total of 288 bands were detected, and 220 bands (76.4%) were polymorphic. The AFLP fingerprints of AGE were different from those of PAGE. Separation of the fragments with low molecular weight and genetic polymorphisms revealed a distinct pattern in the two gel systems. In the present study, the average bandsharing values of the individuals between two populations apart from the geographic sites in Kangwon-do ranged from 0.084 to 0.738 of AGE and PAGE. The bandsharing values between individuals No.9 and No. 10 showed the highest level within population, whereas the bandsharing values between individuals No.5 and No.7 showed the lowest level. As calculated by bandsharing analysis, an average of genetic difference (mean$\pm$SD) of individuals was approximately 0.590$\pm$0.125 in this population. In AGE, the single linkage dendrogram resulted from two primers (M11+H11 and M13+H11), indicating six genetic groupings composed of group 1 (No.9 and 10), group 2 (No. 1, 4, 5, 7, 10, 11, 16 and 17), group 3 (No. 2, 3, 6, 8, 12, 15 and 16), group 4 (No.9, 14 and 17), group 5 (No. 13, 19, 20 and 21) and group 6 (No. 23). In AGE, the genetic distances among individuals of between-population ranged from 0.108 to 0.392. In AGE, the shortest genetic distance (0.108) displaying significant molecular differences was between individuals No.9 and No. 10. Especially, the genetic distance between individuals No. 23 and the remnants among individuals within population was highest (0.392). Additionally, in the cluster analysis using the PAGE data, the single linkage dendrogram resulted from two primers (M12+H13 and M11+H13), indicating seven genetic groupings composed of group 1 (No. 15), group 2 (No. 14), group 3 (No. 11 and 12), group 4 (No.5, 6, 7, 8, 10 and 13), group 5 (No.1, 2, 3 and 4), group 6 (No.9) and group 7 (No. 16). By comparison with the individuals in PAGE, genetic distance between No. 10 and No. 7 showed the shortest value (0.071), also between No. 16 and No. 14 showed the highest value (0.242). As with the PAGE analysis, genetic differences were certainly apparent with 13 of 16 individuals showing greater than 80% AFLP-based similarity to their closest neighbor. The three individuals (No. 14, No. 15 and No. 16) of rainbow trout between two populations apart from the geographic sites in Kangwon-do formed distinct genetic distances as compared with other individuals. These results indicated that AFLP markers of this fish could be used as genetic information such as species identification, genetic relationship or analysis of genome structure, and selection aids for genetic improvement of economically important traits in fish species.

• The Journal of Information Systems
• /
• v.31 no.1
• /
• pp.239-269
• /
• 2022

Purpose This paper attempts to identify items for improving the usage of PLM(Product Lifecycle Management) systems and suggests ways to prioritize improvement items on the basis of importance. It also tries to find out differences in the importance of improvement items due to the company size, the industry, the job, or the PLM solution. Design/methodology/approach Through a survey from participants to a PLM System Conference, data were collected from a sample of 181 users who had the previous experience in using a PLM system. In order to figure out the differences in the importance among user groups, the F-test with the Scheffe test as a post-hoc analysis was used in case of equal variances and the Welch test with the Dunnett T3 test was used in case of unequal variances. Findings This study sorted out 25 improvement ideas according to their importance assessed by the PLM system users. The top five ideas are improving data consistency, error minimization, fast system response time, enhancing user recognition, and business process improvement. The support group puts higher importance than the general user group in data consistency, fast system response time, enhancing user recognition, business process improvement, dedicated team for data consistency, continuous support from management, hardware performance upgrade, output linkage to other systems, and shortening problem solving duration. The largest company group attaches significantly higher weights than the smallest company group to data consistency, error minimization, fast system response time, business process improvement, dedicated team for data consistency, security with proper access management, output linkage to other systems, and better user interface.

• Journal of the Korean Geographical Society
• /
• v.49 no.6
• /
• pp.884-896
• /
• 2014

This study aims to identify the factors that contribute to the regional innovative capacity and to analyze the effects on the regional economic development including newly-established corporation and job creation. The results are as follows. First, as a result of factor analysis, the 14 variables were grouped into 3 factors, i.e. innovative input, infrastructure, and linkage. Second, the panel models were developed using the above factor scores and economic performance variables such as the number of newly-established corporation and employees. As a result, innovative capacity factors positively contributed to the newlyestablished corporation and job creation. The innovative input was the most influential factor determining the regional economic performance, followed by linkage and infrastructure. This study suggests several policy implications for the reinforcement of innovative capacity and regional competitiveness.

• Psychiatry investigation
• /
• v.15 no.12
• /
• pp.1121-1129
• /
• 2018

Objective Categorical syndrome such as schizophrenia could be the complex of many continuous mental structure phenotypes including several personality development/degeneration dimensions. This is the study to search heritability and familiality of MMPI personality dimensions in the Korean schizophrenic LD (Linkage Disequilibrium) families. Methods We have recruited 204 probands (with schizophrenia) with their parents and siblings whenever possible. We have used MMPI questionnaires for measuring personality and symptomatic dimensions. Heritabilities of personality dimensions in total 543 family members were estimated using Sequential Oligogenic Linkage Analysis Routines (SOLAR). Personality dimensions in total family members were compared with those in 307 healthy unrelated controls for measuring the familialities using ANOVA analysis. Results Seven of the 10 MMPI variables were significantly heritable and were included in the subsequent analyses. The three groups (control, unaffected 1st degree relative, case) were found to be significantly different with the expected order of average group scores for all heritable dimensions. Conclusion Our results show that the aberrations in several personality dimensions could form the complexity of schizophrenic syndrome as a result of genetic-environment coactions or interactions in spite of some limitations (recruited family, phenotyping).

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.12B no.1
• /
• pp.7-12
• /
• 2002

This paper presents a method to estimate an effective length of a 1000-kVA superconducting generator using three-dimensional FE analysis. Flux linkage of stator coil and the induced voltage are calculated with FEM program and Faraday's law. An effective length of the stator coil is estimated using the calculated voltage and geometric configurationn of the machine. In order to verify the estimation method, 30-kVA superconducting generator is built and tested. The test result agrees reasonably well with the estimation.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.9 no.6
• /
• pp.213-230
• /
• 2014

Increasing unemployment rate and creation of new jobs are most important issues around the world recently. Then many developed countries, including Republic of Korea, establish and enforce a variety of start-up activation policies to increase employment rate and boom up the national economy. Establishing linkage of entrepreneurship motivation, entrepreneurship, entrepreneurial intention and firm performance, focusing on potential entrepreneurs and entrepreneur, it could provide personalized and targeted entrepreneurial policy programs to increase entrepreneurship, because entrepreneurship is the most important factor to activate startups. On this study, it established factors of entrepreneurial motivation on potential entrepreneurs and entrepreneurs, and analyzed the linkage of factors of entrepreneurial motivation, entrepreneurship, entrepreneurial intention(potential entrepreneurs) and firm performance(entrepreneurs). For analysis, this study conducted descriptive statistics, reliability analysis, factor analysis to verify validity, correlation analysis, and regression to analyze influence between factors. Potential entrepreneurs group has 202 samples, and findings show self-efficacy, social network, economic status and government policy influence on entrepreneurship positively. And self-efficacy, startup education, economic status and government policy have a positive effect on entrepreneurial intention, too. Entrepreneurs group has 212 samples, and findings show self-efficacy, social network and economic status influence on entrepreneurship. And each linkage has a positive effect, that self-efficacy - financial and non-financial performance, startup education - financial and technological performance, social network - financial performance, economic status - financial and non-financial performance, and government policy - financial and technological performance.

• Journal of Oriental Neuropsychiatry
• /
• v.24 no.3
• /
• pp.229-244
• /
• 2013

Objectives : The purpose of this study was to provide information about Maumgongbu to meet the needs of people by analysing the concept of Maumgongbu in group counseling. Methods : This study was conducted using Walker and Avant's Concept Analysis Strategy. Dictionaries, Wonbuddhism's Kyunjions and literatures, and participants' journals were reviewed after enrolling in Onsarm maumgongbu group counseling. Results : The attributes of the Maumgongbu include emotion, object, self-reflection, attribution, and creativity. The antecedents of "Maumgongbu" are the conditions arising from negative emotions. The Maumgongbu helps people find the emotional causality of their inner self by self-reflecting, getting out of false belief, restoring positive emotions, maintaining healthy and warm relationships with oneself, family, friends and society. Above all, the Maumgongbu makes people experience tranquility and true happiness and activate their positive energy or power. Conclusions : If there is a clear indication of linkage to principles, attributions, precedents and consequences, and empirical referents to any of Maumgongbu programs, there is no doubt that our understanding of the human mind and lives will be greatly enriched. Furthermore, self-discipline and steadfast complements give us calmness, peacefulness and better quality of life.