• Journal of KIBIM
• /
• v.6 no.3
• /
• pp.49-56
• /
• 2016

As project opportunities for the Architecture, Engineering and Construction (AEC) industry have grown more complex and larger, the utilization of Building Information Modeling (BIM) technologies for three-dimensional (3D) design and simulation practices has been increasing significantly; the typical applications of the BIM technologies include clash detection and design alternative based on 3D planning, which have been expanded over to the technology of construction management in the AEC industry for virtual design and construction. As for now, commercial BIM software has been operated under a single-user environment, which is why initial costs for its introduction are very high. Cloud computing, one of the most promising next-generation Internet technologies, enables simple Internet devices to use services and resources provided with BIM software. Recently in Korea, studies to link between BIM and cloud computing technologies have been directed toward saving costs to build BIM-related infrastructure, and providing various BIM services for small- and medium-sized enterprises (SMEs). This study addressed development of the usage metering functions of BIM software under cloud computing architecture in order to archive and use BIM data and create an optimal revenue structure so that the BIM services may grow spontaneously, considering a demand for cloud resources. For the reason, we surveyed relevant cases, and then analyzed needs and requirements from AEC industry. Based on the relevant cases, customizing for cloud BIM and design for the development was performed. We also surveyed any related-law to support cloud computing-based BIM service. Finally, we proposed herein how to optimally design and develop the usage metering functions of cloud BIM software.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.6A
• /
• pp.386-396
• /
• 2003

Recently, mobile communication systems have supported various services including internet from voice centric service as they evolve toward 3G. To accommodate the increasing number of users, an AAL2 multiplexing scheme is introduced in the UTRAN tub interface for link efficiency. However, limited radio resources and different requirements of various services make it difficult to guarantee the QoS requirements at radio access networks. The conventional AAL2/ATM multiplexing systems focused on the multiplexing efficiency of voice anddata services and QoS issues of real time and non real time services. In this paper, we classfy various services according to QoS requirements and propose AAL2/ATM multiplexing schemes using statistical multiplexing and scheduling with a rather simple structure to guarantee the given requirements. Simulation results show that the proposed schemes perform better than the conventional schemes to guarantee QoS requirements of various services.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.6
• /
• pp.672-677
• /
• 2016

Development of Internet has been successfully inspired with extensive deployment of the network technology and application. However, increases in Internet usage had caused a lot of traffic overload in these days. Thus, we need a continuous research and development on the network virtualization for effective resource allocation. In this paper, we propose a minimal cost virtual network mapping algorithm using Piecewise Linear Cost Function. We exploited an algorithm with Linear Programming and D-VINE for node mapping, and Shortest Path Algorithm based on linear programming solution is used for link mapping. In this way, we compared and analyzed the average cost for arrival rate of VN request with linear and tree structure. Simulation results show that the average cost of our algorithm shows better efficiency than ViNEyard.

• Journal of the Korean Home Economics Association
• /
• v.48 no.1
• /
• pp.67-81
• /
• 2010

Consumer researchers found that compulsive buying was a part of a category of compulsive consumption that was interrelated to addictive and repetitive behaviors. The present study empirically examined the co-morbidity of compulsive buying and Internet addiction among e-commerce users in terms of consumption disorders. Although the prevalence of Internet use and on-line sales remarkably increase in recent years, almost no study examines on-line compulsive buying behavior. This study explored the link between compulsive buying and Internet addiction among e-commerce users, and investigated the characteristics of on-line shoppers with respect to two forms of compulsive consumption, which were divided into compulsive buying and Internet addiction. Additionally, factors that related to compulsive buying behaviors among e-commerce users were also examined. The present research was conducted using a convenience sample of 394 young adults between the ages of 20-30, and the Faber and O'Guinn's DSCB scale and the Widyanto's Internet addiction scale (IA) were used. Confirmatory factor analyses were utilized to evaluate the structure of the DSCB and IA, and a Probit model was used to examine determinants for the compulsive buying behaviors of e-commerce users. E-commerce users were classified into four groups; high compulsion and high addiction, low compulsion and low addiction, high compulsion and low addiction, and low compulsion and high addiction. Consumers with high compulsion and high addiction spent higher amounts of money on their on-line purchases and were frequently connected with the Internet compared to the three other consumer groups. Consumers with compulsive buying behaviors were also found to have significantly greater Internet addiction tendencies than typical buyers. Compulsive buyers were more likely to engage in Internet addiction and the number of purchasing via on-line shopping mall, and had higher materialism. Policy implications and suggestions for consumer education programs were discussed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.3A
• /
• pp.235-243
• /
• 2009

In this paper, we investigate the cognitive and cooperative communication scheme to improve the spectral efficiency in multiuser OFDMA systems using wireless relays. First, we propose the frame structure in which the efficient frequency reuse scheme with the cognitive technique is performed to increase the system throughput. And in the case where the THP (Tomlinson-Harashima preceding) is used for the elimination of interference from the relay, we derive the effective signal to noise ratio of the link largely affected by the channel quantization error. From the system level simulation results, it is shown that the proposed cognitive and cooperative communication scheme increases the overall system performance including the feedback overhead.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.9A
• /
• pp.853-866
• /
• 2008

In this paper, a multi-hop relaying transmission scheme is analyzed regarding its feasibility and potentiality in the IEEE 802.22-based cognitive radio (CR) environment. Shortly, basic design issues are addressed such as relay station (RS) deployment and a frame structure of physical channel to escape inter-hop interference. This paper mainly develops a radio resource management scheme based on spectrum sensing results aggregated from CR secondary nodes and improves the opportunistic spectrum sharing efficiency. In particular, a decision rule about a channel availability is made using a distributed sensing method. Subsequently, spectrum allocation and routing path decision procedures are proposed to establish a link from source to destination with a hop-by-hop manner. Simulation results show that the proposed multi-hop relaying scheme is substantially profitable in CR environments if the number of hops and RS deployment are designed in such a way that the spectrum sharing gain is larger than spectrum division loss which is inherently induced in multi-hop relaying systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.11
• /
• pp.2187-2192
• /
• 2016

A data-centric routing protocol considering a data aggregation technique at relay nodes is required to increase the lifetime of wireless sensor networks. An energy-efficient data-centric routing algorithm is proposed by considering a tradeoff between acquisition time and energy consumption in the wireless sensor network. First, the proposed routing scheme decides the sink node among all sensor nodes in order to minimize the maximum distance between them. Then, the proposed routing extends its tree structure in a way to minimize the link cost between the connected nodes for reducing energy consumption while minimizing the maximum distance between sensor nodes and a sink node for rapid information gathering. Simulation results show that the proposed data-centric routing algorithm has short information acquisition time and low energy consumption; thus, it achieves high energy efficiency in the wireless sensor network compared to conventional routing algorithms.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.1140-1148
• /
• 2014

Due to Seoul city population growth, urbanization and industrial structure change, apartment type factory was introduced. The purpose of this study, by analyzing the relationship between land shape of apartment type factory and privately owned public space, draw the elements to increase publicness. Draw land shape and private owned public space layout plan elements with advanced research and analysis through cases. As a result of analysis, land shape of the square and the front-side connected arrangement of the privately owned public space are good for the increase of publicness, rectangular land shape good that front-side connected arrangement and front-back arrangement, to consider in terms of user identification and access via the link should be good.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.3
• /
• pp.51-59
• /
• 2008

The objective of this study is to kinematically analyze forehand & backhand strokes of abscission handicap wheelchair table tennis athletes. The participant of this study were picked out of national athletes who have abscission handicap. Forehand stroke movement was expected to show a throw like motion. However, external rotation and internal rotation of the right arm created a backswing and an impact. Backhand stroke was expected to show a push like motion, and as expected, proximal part of the body didn't participate in the stroke motion, but the distal part, the right arm, rotated internally to backswing and external rotated to impact to form a push like motion. Forehand swing was expected to show throw like motion according to the Link Segmental System principle. However, abscission handicap athlete didn't show clear linking structure connecting proximal and distal parts. Successful strokes were dependant only on the angle of arm rotation.

• The Plant Pathology Journal
• /
• v.33 no.4
• /
• pp.362-369
• /
• 2017

White root rot disease, caused by the pathogen Rosellinia necatrix, is one of the world's most devastating plant fungal diseases and affects several commercially important species of fruit trees and crops. Recent global outbreaks of R. necatrix and advances in molecular techniques have both increased interest in this pathogen. However, the lack of information regarding the genomic structure and transcriptome of R. necatrix has been a barrier to the progress of functional genomic research and the control of this harmful pathogen. Here, we identified 10,616 novel full-length transcripts from the filamentous hyphal tissue of R. necatrix (KACC 40445 strain) using PacBio single-molecule sequencing technology. After annotation of the unigene sets, we selected 14 cell cycle-related genes, which are likely either positively or negatively involved in hyphal growth by cell cycle control. The expression of the selected genes was further compared between two strains that displayed different growth rates on nutritional media. Furthermore, we predicted pathogen-related effector genes and cell wall-degrading enzymes from the annotated gene sets. These results provide the most comprehensive transcriptomal resources for R. necatrix, and could facilitate functional genomics and further analyses of this important phytopathogen.