• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.2
• /
• pp.10-16
• /
• 2016

For higher reliability against a link failure of a control network in railway vehicles, a recovery mechanism is needed. We introduce a problem that, when a link failure occurs in a ring-topology control network, a node may experience a significant increase of transmission delay depending on its relative position within the network. We then propose two mechanisms to solve this problem: (1) differentiating and prioritizing node traffic in forwarding; and (2) switching some nodes to a backup bus-topology network. Our simulation study shows that, while the first mechanism achieves a limited gain by only compensating queuing delay, the second one gets a sufficient gain which is impacted by the number of nodes switched to the bus network.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.4
• /
• pp.331-339
• /
• 2018

The IEEE 1588, commonly known as a precision time protocol (PTP), is a standard for precise clock synchronization that maintains networked measurements and control systems. The best master clock (BMC) algorithm is currently used to establish the master-slave hierarchy for PTP. The BMC allows a slave clock to automatically take over the duties of the master when the slave is disconnected due to a link failure and loses its synchronization; the slave clock depends on a timer to compensate for the failure of the master. However, the BMC algorithm does not provide a fast recovery mechanism in the case of a master failure. In this paper, we propose a technique that combines the IEEE 1588 with network bonding to provide a faster recovery mechanism in the case of a master failure. This technique is implemented by utilizing a pre-existing library PTP daemon (Ptpd) in Linux system, with a specific profile of the IEEE 1588 and it's controlled through bonding modes. Network bonding is a process of combining or joining two or more network interfaces together into a single interface. Network bonding offers performance improvements and redundancy. If one link fails, the other link will work immediately. It can be used in situations where fault tolerance, redundancy, or load balancing networks are needed. The results show combining IEEE 1588 with network bonding enables an incredible shorter recovery time than simply just relying on the IEEE 1588 recovery method alone.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.3
• /
• pp.399-404
• /
• 2015

This paper presents the DC voltage control method in DC link of High Voltage Direct Current(HVDC) for an offshore wind farm in Low Voltage Ride Through(LVRT) situation. Wind generators in an offshore wind farm are connected to onshore network via HVDC transmission. Due to LVRT control of grid side inverter in HVDC, power imbalancing in DC link is generated and this consequentially causes rising of DC voltage. A de-loading scheme is one of the method to protect the wind power system DC link capacitors from over voltage. But the flaw of this method is slow control response time and that it needs long recovery time to pre-fault condition after fault clear. Thus, this paper proposes improved de-loading method and we analyze control performance for DC voltage in LVRT control of HVDC for an offshore wind farm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.7
• /
• pp.1541-1548
• /
• 2012

This paper proposes a new multipath-based routing protocol on MANETs with Fast-Recovery of failures. The proposed protocol establishes the primary and secondary paths between a source and a destination considering the end-to-end packet reception reliability of routes. The primary path is used to transmit messages, and the secondary path is used to recover the path when detecting failures on the primary path. If a node detects a link failure during message transmission, it can recover the path locally by switching from the primary to the secondary path. By allowing the intermediate nodes to recover locally the route failure, the proposed protocol can reduce the number of packet loss and the amount of control packets for setting up new paths. The simulation result using QualNet simulator shows that the proposed protocol was about 10-20% higher than other protocols in terms of end-to-end message delivery ratio and the fault recovery time in case of link fault was about 3 times faster than the other protocols.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.5B
• /
• pp.369-380
• /
• 2003

In the CDMA wireless link, frame errors are correlated and burst because of fading. The implementation ability of RLP error recovery is dependent on the correlated frame errors. The (1,2,3) retransmission scheme, which is recommended as default in IS-707, is not adapted in high frame loss regime with strong correlations. By using the modified error recovery method, where the total number of retransmission attempts is the same and the retransmission is increased, the proposed retransmission scheme can efficiently recover frame errors than the (1,2,3) retransmission scheme. Since the modified scheme has longer transmission delay due to the increase of retransmission round, we propose the algorithm of retransmission failure prediction to improve the modified error recovery scheme. We simulate the modified error recovery scheme applying our algorithm and compare two schemes. (i.e. default scheme by IS-707 and modified scheme) not applying our algorithm. In the result, we show TCP performance improvement is better than default scheme by IS-707.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.9B
• /
• pp.793-805
• /
• 2003

In OBS (Optical Burst Switching) networks which decouple the burst from its header, the fault of a fiber link can lead to the failure of all the light-path that traverses the fiber. Because each light-path is expected to operate at a rate of a few Gbps by using WDM (Wavelength Division Multiplexing) technology, any failure may lead to large data loss. Therefore, an efficient recovery scheme must be provided. In this paper, we analyze network utilization and BCP (Burst Control Packet) loss rate according to each link failure by applying the conventional restoration schemes in OBS networks. And through these simulation results, an ASPR scheme is proposed improve the fault management scheme in terms of recovery time and throughput. Finally, We compare the performance of our proposed scheme with that of the conventional one with respect to burst loss rate, resource utilization and throughput by OPNET simulations.

• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.2169-2171
• /
• 1998

In order to improved the three phase GTO CSI of high efficiency IM drive with low loss commutation and snubber energy, we studied the energy recovery circuit to recover stored energy in clamping capacitor, dc link inductor and snubber capacitor, used an induction motor as the load of inverter. Specially, we investigated how dc input power is increased or decreased according to size of dc link inductor. The validity of this system is proved through experiment.

• Journal of Communications and Networks
• /
• v.13 no.4
• /
• pp.393-399
• /
• 2011

We evaluate the link-level performance of cooperative multi-hop relaying networks with an maximum distance separable (MDS) code. The effect of the code on the link-level performance at the destination is investigated in terms of the outage probability and the spectral efficiency. Assuming a simple topology, we construct an absorbing Markov chain. Numerical results indicate that significant improvement can be achieved by incorporating an MDS code. MDS codes successfully facilitate recovery of the message block at a relaying node due to powerful error-correcting capability, so that it can reduce the outage probability. Furthermore, we evaluate the average number of hops where the message block can be delivered.

• Journal of information and communication convergence engineering
• /
• v.2 no.1
• /
• pp.9-14
• /
• 2004

In this paper the modeling of the RLP layer in CDMA2000 is presented, which uses the NAK based ARQ scheme for Random Error Channels. The RLP performs a partial link recovery through limited number of RLP frame transmission in case of frame error. In case when the RLP fails due to excessive frame error, the control is passed on to the higher (TCP) layer. The TCP layer provides the complete end-to-end recovery. Thus the reliable performance at the TCP/RLP is essential to maintain the required Quality of Service in the DS-CDMA wireless links. The modeling is done for the performance analysis of the system in terms of the throughput and the mean extra delays, which are calculated analytically and are compared with the results generated by the simulations. This paper studies the effect of the random errors over different types of RLP frame formats and also the performance of the NAK based ARQ mechanism used under these conditions. The simulation provides with the over all characteristics of the throughput and the mean extra delay in terms of realistic environment parameters like Eb/No and probability of packet error (PE), based on the channel conditions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.9
• /
• pp.3449-3467
• /
• 2015

A broadcast operation is the fundamental transmission technique in mobile ad-hoc networks (MANETs). Because a broadcast operation can cause a broadcast storm, only selected forwarding nodes have the right to rebroadcast a broadcast message among the one-hop and two-hop neighboring nodes of a sender. This paper proposes the maximum intersection self-pruning (MISP) algorithm to minimize broadcasting redundancy. Herein, an example is given to help describe the main concept of MISP and upper bounds of forward node have been derived based on induction. A simulation conducted demonstrated that when conventional blind flooding (BF), self-pruning (SP), an optimized link state routing (OLSR) multipoint relay (MPR) set, and dominant pruning (DP), are replaced with the MISP in executing Strong duplicate address detection (DAD), the performances in terms of the energy consumption, upper bounds of the number of forward nodes, and message complexity have been improved. In addition, to evaluate the performance in reference to the link error probability, P_e, an enhancement was achieved by computing a proposed retransmission limit, S, for error recovery based on this probability. Retransmission limit control is critical for efficient energy consumption of MANET nodes operating with limited portable energy where Strong DAD reacts differently to link errors based on the operational procedures.