• Journal of Mechanical Science and Technology
• /
• 제16권6호
• /
• pp.799-809
• /
• 2002

In order to utilize a parallel mechanism as a machine tool component, it is important to estimate the errors of its end-effector due to the uncertainties in parts. This study proposes an error analysis for a new parallel device, a cubic parallel mechanism. For the parallel device, we consider two kinds of errors. One is a static error due to link stiffness and the other is a dynamic error due to clearances in the parts. In this study, we propose a stiffness model for the cubic parallel mechanism under the assumption that the link stiffness is a linear function of the link length. Also, from the fact that the errors of u-joints and spherical joints are changed with the direction of force acting on the link, they are regarded as a part of link errors, and then the error model is derived using forward kinematics. Lastly, both the error models are integrated into the total error, which is analyzed with a test example that the platform moves along a circular path. This analysis can be used in predicting the accuracy of other parallel devices.

• ETRI Journal
• /
• 제29권5호
• /
• pp.569-595
• /
• 2007

Particularly in wireless communications, link errors severely affect the quality of the services due to the high error probability and the specific error characteristics (burst errors) in the radio access part of the network. In this work, we show that thorough analysis and appropriate modeling of radio-link error behavior are essential to evaluate and optimize higher layer protocols and services. They are also the basis for finding network-aware cross-layer processing algorithms which are capable of exploiting the specific properties of the link error statistics, such as predictability. This document presents the analysis of the radio link errors based on measurements in live Universal Mobile Telecommunication System (UMTS) radio access networks as well as new link error models originating from that analysis. It is shown that the knowledge of the specific link error characteristics leads to significant improvements in the quality of streamed video by applying the proposed novel network- and content-aware cross-layer scheduling algorithms. Although based on live UMTS network experience, many of the conclusions in this work are of general validity and are not limited to UMTS only.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권4호
• /
• pp.75-80
• /
• 2001

An error analysis is very important to estimate performance of a precision machine. This study proposes an error analysis for a new parallel device, a cubic parallel device. The cubic parallel manipulator has error sources including upper and lower universal joint errors due to the directional changes in the link and actuation errors. The maximum errors of the end effector are affected by the axial direction changes of each links and the clearances of the universal joints when the parallel manipulator is moving along a path. It is found that the changes of errors mostly occur at the positions where the directions of exerting link forces shift. The error analysis is based on an error model formed from the relation between the universal point errors and the end-effector accuracy. The analysis method can be also used in predicting the accuracy of other parallel devices.

• 산업기술연구
• /
• 제23권A호
• /
• pp.41-46
• /
• 2003

Because the quality of a radio link in real environment is generally varied with time, there is a difference between the delay in the real environment and one obtained from the analytic model where a time-varying link model is not used as a link model for a Bluetooth. This paper analyzes the transmission delay of a message in the time-varying radio link model for the Bluetooth. The time-varying radio link is modeled with a two-state Markov model. The mean transmission delay of the message is analytically obtained in terms of the arrival rate of the message, the state transition probability in the Markov model, and the packet error rate.

• 전자공학회논문지B
• /
• 제30B권5호
• /
• pp.52-61
• /
• 1993

This paper deals with adaptive control method of a robot manipulator with one-flexible link. ARMA model is used as a prediction and estimation model, and adaptive control scheme consists of parameter estimation part and adaptive controller. Parameter estimation part estimates ARMA model's coefficients by using recursive least-squares(RLS) algorithm and generates the predicted output. Variable forgetting factor (VFF) is introduced to achieve an efficient estimation, and adaptive controller consists of reference model, error dynamics model and minimum prediction error controller. An optimal input is obtained by minimizing input torque, it's successive input change and the error between the predicted output and the reference output.

• 한국통신학회논문지
• /
• 제16권6호
• /
• pp.498-508
• /
• 1991

본 논문은 비트레벨에서, 3 - 상태 마코프체인의 모델을 사용한 종단대 종단 디지털 접속부에서의 개개 링크들의 에러성능을 평가하는 성능 분석 알고리즘을 표현했다. 링크모델은 개개링크의 버스트에러를 제안했으며, 또한 그것은 여러가지 개개링크들을 연결시키는 방법과 종단대 종단 디지털 접속부에 대한 모델을 추출하는 방법을 나타냈다. 이 결과적인 종단대 종단 모델이 주어진 블럭크기에 대한 비트에러율과 블럭에러와 같은 성능 파라미터를 계산하는데 사용될 수 있다.

• 한국ITS학회 논문지
• /
• 제17권2호
• /
• pp.39-57
• /
• 2018

본 연구는 교통운영 개선에 필요한 빅데이터 및 인공지능 모델 개발의 일환으로서, 도시부의 링크통행시간 및 통과교통량 등 가용 데이터 등을 이용하여 교통변수로 활용도가 높은 차량대기길이와의 관계를 딥러닝(Deep Learning)을 통해 학습하고 추정하는 인공지능 모델을 구축하는 것을 목표로 하였다. 차량대기길이 추정모형은 데이터 분석결과를 토대로 하여 우선 차량대기길이의 링크 초과여부를 분류한 후 링크 초과 및 링크 미초과 상황에서의 차량대기길이 추정하는 3개의 모형으로 모델링하였다. 딥러닝 모형은 텐서플로우로 구현하였으며, 모든 모형은 DNN 구조로서 은닉층과 노드 개수를 다양화하여 학습 및 테스트 후 최소 오차를 나타내는 네트워크 구조를 선정하였다. 차량대기길이 링크 초과여부 분류 모형은 약 98%의 정확도를 나타냈으며, 미초과 모형은 15% 미만, 초과 모형은 5% 미만의 오차를 각각 나타내었다. 링크별 평균 오차는 12%로 도출되었다. 이를 기존 검지기 데이터 기반의 방식과 비교한 결과 오차가 약 39% 감소된 것으로 분석되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1832-1835
• /
• 1997

Off-line programming systems are widely spread in assembly lines of minute electronic products to huge offshore structures. Any OLP system has to be calibrated before the on-line robot tasks are performed because there are inherent differences between the CAD model on OLP and the real robot workspace. This paper uses simple geometric expressions to propose a calibration method applicable to an OLP for SCARA robots. A positioning task on the two-dimensional horizontal surface was used in the error analysis of a SCARA robot and the anaysis shows that the inaccuracy results from the two error sources non-zero offset angles of two rotational joints at the zero return and differences in link lengths. Pen marks on a sheet of plotting paper are used to determine the accurate data on the joint centers and link dimensions. The calculated offset angles and link lengths are fed back to the OLP for the calibration of the CAD model of the robot and task environments.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.445-445
• /
• 2000

This paper proposes the MIMO indirect adaptive fuzzy controller to control the two-link manipulators. The input-output linearization technique, equivalent control input plus integral term, augmented error model and recursive least square adaptive law are used fer the controller. The linear type of fuzzifier-defuzzifier fuzzy logic system used for nonlinear function makes easy to farm the error model and able to follow the adaptive system approach. Such that control approach, the control system is not required joint speed and accerelation measurement and easy to implement and tune. The simulation results showed that the proposed controller has good control performance, stability, very small tracking error, decoupling, fast convergence, robust to parameter variation and load.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.789-794
• /
• 2000

This study proposes an error analysis for a cubic parallel device. There are many sources of errors in the device. An error analysis is presented based on an error model formed from the relation between the universal joint error of the cubic parallel manipulator and the end effector accuracy. The analysis shows that the method can be used in evaluating the accuracy of a parallel device.