• Journal of Advanced Marine Engineering and Technology
• /
• 제39권2호
• /
• pp.179-186
• /
• 2015

In the indoor location estimation system, which has recently been actively studied, the received signal strength indicator contains a high level of noise when measuring the signal strength in the range between two nodes consisting of a receiver and a transceiver. To minimize the noise level, this paper proposes an improved adaptive smoothing filter that provides different exponential weights to the current value and previous averaged one of the data that were obtained from the nodes, because the characteristic signal attenuation of the received signal strength indicator generally has a log distribution. The proposed method can effectively decrease the noise level by using a feedback filter that can provide different weights according to the noise level of the obtained data and thus increase the accuracy in the distance and location without an additional filter such as the link quality indicator, which can verify the communication quality state to decrease the range errors in the indoor location recognition using ZigBee based on IEEE 802.15.4. For verifying the performance of the proposed improved adaptive smoothing filter, actual experiments are conducted in three indoor locations of different spatial sections. From the experimental results, it is verified that the proposed technique is superior to other techniques in range measurement.

• 한국인터넷방송통신학회논문지
• /
• 제12권6호
• /
• pp.117-125
• /
• 2012

최근 자동차 시장은 기존의 기계 위주의 기술에서 차량 정보화 및 전자화 기술로 빠르게 패러다임 변화가 이루어지고 있다. 특히, 텔레매틱스 분야는 자동차 제조사 및 이동통신 업체 간의 긴밀한 협조체제를 구축하여 차량 정보화 서비스를 위한 기술 개발을 가속화하고 있다. 그러나 텔레매틱스 서비스는 기지국과 차량, 차량 대 차량 간에 무선통신에 의해 정보교환이 이루어지고 있으므로 전파 간섭에 의한 서비스 품질의 저하를 피할 수 없다. 이에 본 논문에서는 무선통신기반의 차량 네트워크 환경에서 차량과 무선 통신 상호간 간섭을 분석할 수 있는 장비를 설계 구현하고, 시뮬레이션과 실제 차량의 실측실험을 통하여 차량 내 외부에 발생하는 간섭을 감소시켜 통신 품질을 높일 수 있는 방법을 제시한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제18권6호
• /
• pp.1659-1674
• /
• 2024

Conventional maritime communication struggles to provide high data rate services for Internet of Things (IoT) devices due to the variability of maritime environments, making it challenging to ensure consistent connectivity for onboard sensors and devices. To resolve this, we perform mathematical modeling of the maritime channel and compare it with real measurement data. Through the modeled channel, we verify the received beam gain at buoys on the ocean surface. Additionally, leveraging the modeled wave motions, we estimate future angles of the buoy to use the Extended Kalman Filter (EKF) for design beamforming strategies that adapt to the evolving maritime environment over time. We further validate the effectiveness of these strategies by assessing the results from an outage probability perspective. focuses on improving maritime communication by developing a dynamic model of the maritime channel and implementing a Kalman filter-based buoy motion tracking system. This system is designed to enable precise beamforming, a technique used to direct communication signals more accurately. By improving beamforming, the aim is to enhance the quality of communication links, even in challenging maritime conditions like rough seas and varying sea states. In our simulations that consider realistic wave motions, you've observed significant improvements in link quality due to the enhanced beamforming technique. These improvements are particularly notable in environments with high sea states, where communication challenges are typically more pronounced. The progress made in this area is not just a technical achievement; it has broad implications for the future of maritime communication technologies. This paper promises to revolutionize the way we approach communication in maritime environments, paving the way for more reliable and efficient information exchange on the seas.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.614-617
• /
• 2006

This study investigates the quality control and the finishability improvement properties of durable marine concrete under construct in Geo-je Ka-duk fixed link project. Below $3.5\times10^{-12}m^2/s$ chloride migration coefficient and above 40MPa compressive strength are required for the caisson structure concrete. The quality control was performed from physical-chemical analysis of raw materials to concrete test. Also, the efficiency of vibration type and action interval were tested to remove the entrapped air on the faced to form. And kinds of form and remolding agent were also tested. This paper aim to enhance the practical use of high performance concrete to construction field.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.229-231
• /
• 1999

This paper deals with electromagnetic transient modelling of wind power system embedded in distribution networks. Wind power system consists of induction generator link reactor, distribution line, and controlled load unit. The introduction of embedded wind power system presents a new set of conditions to networks both with respect to power quantify needed to be transported and power quality such as sag swell, very short interruption, and flicker. This paper investigates the transient behavior of voltage, frequency, and load flow in wind driven induction generation system embedded in distribution networks.

• 조명전기설비학회논문지
• /
• 제26권10호
• /
• pp.102-110
• /
• 2012

This paper propose the advanced topology of UPQC, its DC link is connected with Lithium battery, to compensate the momentary interruptions. The proposed system can be operated as UPS mode using the parallel inverter, which control the charge or discharge of battery, in case of the interruption. We dvelop 100kVA UPQC using the proposed topology to rise the power quality and the reliability of Microgrid. We verify its usefulness through voltage compensation test, UPS operation test and etc. using Microgrid test facility.

• Safety and Health at Work
• /
• 제9권4호
• /
• pp.434-440
• /
• 2018

Background: In industrial countries, home care of community dwelling elderly people is rapidly growing. Frequent injuries in home caregivers result from slips, trips, and falls (STFs). The current study tests attentional cognitive failure to mediate the association between work stressors and STFs. Methods: A sample of 125 home caregivers participated in a questionnaire study and reported work interruptions, unreasonable tasks, quality-threatening time pressure, conscientiousness, attentional cognitive failures, and STFs. Results: In structural equation modeling, the mediation model was shown to fit empirical data. Indirect paths with attentional cognitive failures as the link between work stressors and STF were all significant in bootstrapping tests. An alternative accident-prone person model, that suggests individual differences in conscientiousness to predict attentional cognitive failures that predict more frequent work stressors and STFs, showed no significant paths between work conditions and STFs. Conclusion: To prevent occupational injury, work should be redesigned to reduce work interruptions, unreasonable tasks, and quality-threatening time pressure in home care.

• 정보관리학회지
• /
• 제39권2호
• /
• pp.233-254
• /
• 2022

지적구조 분석을 위해 가중 네트워크를 시각화해야 하는 경우에 패스파인더 네트워크와 같은 링크 삭감 알고리즘이 널리 사용되고 있다. 이 연구에서는 네트워크 시각화를 위한 링크 삭감 알고리즘의 적합도를 측정하기 위한 지표로 NetRSQ를 제안하였다. NetRSQ는 개체간 연관성 데이터와 생성된 네트워크에서의 경로 길이 사이의 순위 상관도에 기반하여 네트워크의 적합도를 측정한다. NetRSQ의 타당성을 확인하기 위해서 몇 가지 네트워크 생성 방식에 대해 정성적으로 평가를 했었던 선행 연구의 데이터를 대상으로 시험적으로 NetRSQ를 측정해보았다. 그 결과 품질이 좋게 평가된 네트워크일수록 NetRSQ가 높게 측정됨을 확인하였다. 40가지 계량서지적 데이터에 대해서 4가지 링크 삭감 알고리즘을 적용한 결과에 대해서 NetRSQ로 품질을 측정하는 실험을 수행한 결과, 특정 알고리즘의 네트워크 표현 결과가 항상 좋은 품질을 보이는 것은 아니며, 반대로 항상 나쁜 품질을 보이는 것도 아님을 알 수 있었다. 따라서 이 연구에서 제안한 NetRSQ는 생성된 계량서지적 네트워크의 품질을 측정하여 최적의 기법을 선택하는 근거로 활용될 수 있을 것이다.

• 산업융합연구
• /
• 제21권9호
• /
• pp.11-21
• /
• 2023

그동안 CG제작공정의 효율성을 향상시키기 위한 많은 연구가 있었지만, 작업 중간에 결과물의 확인이 어렵고 렌더링 타임에 많은 시간이 소요된다는 문제점을 극복하기는 쉽지 않았다. 그러나 최근 실시간으로 결과물의 확인이 가능한 언리얼 라이브 링크의 활용 가능성이 커지면서 제작공정의 효율성 향상에 대한 기대감이 높아지고 있다. 이에 이 연구에서는 언리얼 라이브 링크를 이용한 3D 애니메이션 제작공정의 효율성을 분석하였다. 이를 위해 마야로 모델링, 리깅, 애니메이션, 레이아웃 작업을 하고 언리얼 라이브 링크를 통해 언리얼 엔진에서 최종 아웃풋 이미지 시퀀스를 도출하는 방식으로 3D 애니메이션을 제작하였다. 그리고 3D 소프트웨어 자체에서 최종 아웃풋 이미지 시퀀스를 을 도출하는 기존의 제작공정과 본 제작공정의 차이점을 비교 분석하였다. 분석 결과 전통적인 3D 애니메이션의 제작공정과 달리 높은 퀄리티의 최종결과물을 보여주는 뷰포트 화면을 통해 작업을 진행함으로써 실시간으로 최종 작업 결과물을 확인하는 것이 가능하였으며, 실시간 화면 캡쳐를 통해 최종결과물을 도출함으로써 작업의 효율성이 극대화되는 것을 알 수 있었다. 최근 3D 애니메이션과 영화 산업현장에서 게임 엔진을 활용하는 사례가 점차 늘고 있는데, 언리얼 라이브 링크를 활용할 경우 작업의 효율성이 매우 극대화될 것으로 예상된다.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권4호
• /
• pp.41-50
• /
• 2020

The paper aims to investigate auditors, auditing firms and other external factors that affect quality of information technology audit in Vietnam. We conducted 2 types of data collections including direct and on survey. For direct survey, we sent directly to auditors at the training classes organized by State Securities Exchanges Commission. An online survey was established and Google doc link was provided to the Big4 and non-Big4 auditors. We received 138 survey responses in that 90 auditors came from Big4 and 48 auditors from non-Big4 firms. The data are analyzed using a factor analysis and compare means approaches to illustrate the potential IT audit quality factors and identify differences between two groups of auditors. The results show that independence and accounting knowledge and audit skills are the most important factors. And since external auditors perform many assurance services, the independence is critical. The result also shows that the auditors need to have enough competent and professional skills when conducting an audit, especially within an IT environment that requires high quality. The findings suggest a similar pattern of two groups in the context of Vietnam and some factors of auditors and auditing firms appear to have a statistically significant impact on quality of IT audit.