• International Journal of Internet, Broadcasting and Communication
• /
• v.16 no.3
• /
• pp.146-157
• /
• 2024

Despite numerous air mattresses marketed to prevent Pressure Ulcers (PU), none have fully succeeded due to residual pressure surpassing critical levels. We introduces an innovative medical bed system aiming at complete PU prevention. This system employs a unique 4-bar link mechanism, moving keys up and down to manage body pressure. Each of the 17 keys integrates a sensor controller, reading pressure from 10 sensors. By regulating motor input, we maintain body pressure below critical levels. Keys are equipped with a servo drive and sensor controller, linked to the main controller via two CAN series. Using fuzzy or PI/IP controllers, we adjust keys to minimize total error, dispersing body pressure and ensuring comfort. In case of controller failure, keys alternate swiftly, preventing ulcer development. Through experimental tests under varied conditions, the fuzzy controller with tailored membership functions demonstrated swift performance. PI control showed rapid convergence, while IP control exhibited slower convergence and oscillations near zero error. Our specialized medical robot bed, incorporating 4-bar links and pressure sensors, underwent testing with three controllers-fuzzy, PI, and IP-showcasing their effectiveness in keeping body pressure below critical ulcer levels. Experimental results validate the proposed approach's efficacy, indicating potential for complete PU prevention.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.4
• /
• pp.318-324
• /
• 2015

Purpose: This study compared shear bond strengths of five self-adhesive cements with phosphate monomer to zirconium oxide ceramic with and without airborn particle abrasion. Materials and methods: One hundred zirconia samples were air-abraded ($50{\mu}mAl_2O_3$). One hundred composite resin cylinders were fabricated. Composite cylinders were bonded to the zirconia samples with either Permacem 2.0 (P), $Clearfil^{TM}$ SA Luting (C), $Multilink^{(R)}$ Speed (M), $RelyX^{TM}$ U200 Automix (R), G-Cem $LinkAce^{TM}$ (G). All bonded specimens were stored in distilled water ($37^{\circ}C$) for 24 h and half of them were additionally aged by thermocycling ($5^{\circ}C$, $55^{\circ}C$, 5,000 times). The bonded specimens were loaded in shear force until fracture (1 mm/min) by using Universal Testing Machine (Model 4201, Instron Co, Canton, MA, USA). The failure sites were inspected under field-emission scanning electron microscopy. The data was analyzed with ANOVA, Tukey HSD post-hoc test and paired samples t-test ($\alpha$=.05). Results: Before and after thermocycling, $Multilink^{(R)}$ Speed (M) revealed higher shear-bond strength than the other cements. G-Cem $LinkAce^{TM}$ (G) showed significantly lower bond strengths after thermocycling than before treatment (P<.05), but the other groups were not significantly different (P>.05). Conclusion: Most self-adhesive cements with phosphate monomer showed high shear bond strength with zirconia ceramic and weren't influenced by thermocycling, so they seem to valuable to zirconia ceramic bonding.

• Journal of Korea Multimedia Society
• /
• v.10 no.10
• /
• pp.1295-1309
• /
• 2007

A wireless access point is used for all communications in the infrastructure mode wireless home networking, including communication between mobile nodes in the same service area. When a mobile station in the infrastructure mode wireless home networking moves into a dead zone, the communication between the mobile station and the access point is disconnected. To solve this problem, the existing wireless home network platforms focus on the ad hoc mode wireless home networking. However, the performance of an ad hoc network is poorly decreased when the number of mobile participating in the ad hoc network increases. In addition, although the ad hoc routing technique is necessary to support seamless communication of mobile nodes, the existing routing protocols, such as AODV and DSR, do not consider that a wireless channel state could affect performance significantly. Therefore, we propose a wireless home networking platform based on the ESCOD (End-to-end Seamless multi-hop COnnection based on Dual network mode) technique incorporating the VLR (Virtual Link Routing) scheme that supports end-to-end seamless connections. Extensive experiments show that the proposed wireless home networking platform incorporating the VLR scheme outperforms wireless home networking platforms based on the AODV and the DSR routing protocols respectively in terms of low packet transmission failure rate, fast packet transmission time, high TCP performance, and a wider coverage area of wireless home networks.

• Journal of Environmental Policy
• /
• v.9 no.2
• /
• pp.111-133
• /
• 2010

Environmental conservation plan, notwithstanding their feasibility and potential utility in construction of environment-friendly spaces, has long been perceived in practice as "declarative" and a "formality." Such perceptions are largely the result of the failure to provide spatial planning that is directly relevant to development of the space in question, and to sufficiently interconnect with urban development plan. This demonstrates the need for ways to link disparate plans, i.e. to enact "spatial environment plan." In response to these issues, this study proposes the systematization of spatial environment data as a necessary prerequisite to the establishment of spatial environment plan, which would provide both linkages with other plans, and ensure the applicability of environmental conservation plan. To this end, this study analyzed existing environmental data, and then proposed systems for links with spatial environment plan. In respect of this, the study examined spatial data systems, and then classified applicable spatial according to each environmental medium. The study also produced spatial information and planning items that can be included in spatial environment plans for each of the nine environmental media, and then constructed a system that could link the existing spatial information system, current spatial environment data, and spatial environment management plan. Furthermore, the study proposed matters for improvement in the construction of spatial environmental data to ensure the activation of spatial environment plan. The construction of a systematic spatial database, by facilitating the smooth establishment of spatial environment plan, can enhance and upgrade environmental conservation plan, while contributing to enhanced linkages with related spatial plans.

• KIPS Transactions on Computer and Communication Systems
• /
• v.12 no.9
• /
• pp.263-272
• /
• 2023

Industrial Internet of Things (IIoT) is an important factor in increasing production efficiency in industrial sectors, along with data collection, exchange and analysis through large-scale connectivity. However, as traffic increases explosively due to the recent spread of IIoT, an allocation method that can efficiently process traffic is required. In this thesis, I propose a two-stage task offloading decision method to increase successful task throughput in an IIoT environment. In addition, I consider a hybrid offloading system that can offload compute-intensive tasks to a mobile edge computing server via a cellular link or to a nearby IIoT device via a Device to Device (D2D) link. The first stage is to design an incentive mechanism to prevent devices participating in task offloading from acting selfishly and giving difficulties in improving task throughput. Among the mechanism design, McAfee's mechanism is used to control the selfish behavior of the devices that process the task and to increase the overall system throughput. After that, in stage 2, I propose a multi-armed bandit (MAB)-based task offloading decision method in a non-stationary environment by considering the irregular movement of the IIoT device. Experimental results show that the proposed method can obtain better performance in terms of overall system throughput, communication failure rate and regret compared to other existing methods.

• Journal of the Korean Geographical Society
• /
• v.47 no.3
• /
• pp.328-346
• /
• 2012

This study provides quantitative constraints on Neogene uplift in the Korean peninsula using onshore paleo-shoreline records and seismic data. The eastern margin of Northeast Asia including Korea sits in the back-arc system behind the Western Pacific Subduction Zone, a complex trench triple junction of the Philippine Sea, Pacific, and Eurasian (Amurian) plates. An analysis of seismic data in the subduction zone shows that the pattern of uplift in the peninsula mirrors the extent of deep seismicity in subducting Pacific plate beneath. Combined with previous tomographic studies it is proposed that uplift is partly driven by asthenospheric upwelling caused by a sinking slab during the Neogene. In addition, the SHmax orientations of E-W and N-S trends in the peninsula are consistent with the prevailing in-situ stress fields in the eastern Eurasian continent generated by various plate boundary forces. The uplift in Korea during the Late Neogene is attributed, in part, to lithospheric failure relating to faulting movements, thus providing a link between dynamic effects of mantle upwelling at sinking slab edge and lithospheric responses driven by plate boundary forces.

• The KIPS Transactions:PartC
• /
• v.8C no.5
• /
• pp.629-636
• /
• 2001

Network is changed from voice-based network into multimedia-based network by development of communication technology and multimedia service. We need a large bandwidth for multimedia service. The optical fiber is a more suitable medium than existing copper-based cable for large bandwidth. But, it is so expensive than copper-based cable. So, Minimizing total cost becomes a more important concept. In order to construct a minimum cost network, we have to consider existing conduits in network. On the other hand, optical fiber network allows that larger amount of traffic can be transmitted than copper-based network does. However, a failure of a node or link can make a serious damage to the network service. Thus, we have to get multiple paths to support continuous service even if a loss of failure occurs in some point of the network. The network survivability problem is to design the network that can provide reliable service to customers anytime with minimum total cost. In an existing solution of the network survivability problem with conduits, a conduit is considered only one time. But, the conduit is reusable if the network satisfies the required survivability. Proposed algorithm can more effectively considered already existed conduit. Network survivability and edge cost is predetermined. The proposed algorithm finds the best solution by conduit sharing within the limits of network survivability. According to the simulation result, the proposed method can decrease 7% of total cost than an existing method by effective conduits adaption.

• Interaction and multiscale mechanics
• /
• v.5 no.3
• /
• pp.229-265
• /
• 2012

Hygroexpansion of wood is a known and undesired characteristic in civil engineering. When wood is exposed to changing environmental humidity, it adsorbs or desorbs moisture and warps. The resulting distortions or - at restrained conditions - cracks are a major concern in timber engineering. We herein present a multiscale model for prediction of the macroscopic hygroexpansion behavior of individual pieces of softwood from their microstructure, demonstrated for spruce. By applying poromicromechanics, we establish a link between the swelling pressure, driving the hygroexpansion of wood at the nanoscale, and the resulting macroscopic dimensional changes. The model comprises six homogenization steps, which are performed by means of continuum micromechanics, the unit cell method and laminate theory, all formulated in a poromechanical framework. Model predictions for elastic properties of wood as functions of the moisture content closely approach corresponding experimental data. As for the hygroexpansion behavior, the swelling pressure has to be back-calculated from macroscopic hygroexpansion data. The good reproduction of the anisotropy of wood hygroexpansion, based on only a single scalar calibration parameter, underlines the suitability of the model. The multiscale model constitutes a valuable tool for studying the effect of microstructural features on the macroscopic behavior and for assessing the hygroexpansion behavior at smaller length scales, which are inaccessible to experiments. The model predictions deliver input parameters for the analysis of timber at the structural scale, therewith enabling to optimize the use of timber and to prevent moisture-induced damage or failure.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.2
• /
• pp.443-461
• /
• 2014

Overlay routing has emerged as a promising approach to improve reliability and efficiency of the Internet. For one-hop overlay source routing, when a given primary path suffers from the link failure or performance degradation, the source can reroute the traffic to the destination via a strategically placed relay node. However, the over-heavy traffic passing through the same relay node may cause frequent package loss and delay jitter, which can degrade the throughput and utilization of the network. To overcome this problem, we propose a Load-Balanced One-hop Overlay Multipath Routing algorithm (LB-OOMR), in which the traffic is first split at the source edge nodes and then transmitted along multiple one-hop overlay paths. In order to determine an optimal split ratio for the traffic, we formulate the problem as a linear programming (LP) formulation, whose goal is to minimize the worse-case network congestion ratio. Since it is difficult to solve this LP problem in practical time, a heuristic algorithm is introduced to select the relay nodes for constructing the disjoint one-hop overlay paths, which greatly reduces the computational complexity of the LP algorithm. Simulations based on a real ISP network and a synthetic Internet topology show that our proposed algorithm can reduce the network congestion ratio dramatically, and achieve high-quality overlay routing service.

• Journal of Convergence Society for SMB
• /
• v.6 no.4
• /
• pp.17-23
• /
• 2016

With the advance of ICT, the Internet has been creating new services in various fields. However, due to the architectural problem of the Internet, it may inhibit the development of network architectures and various services. Network virtualization is being investigated as an alternative to overcome the architectural problem of the Internet and a virtual network resource allocation algorithm is a very important issue. In this paper, we propose a multiple path resource allocation algorithm with shared backup bandwidth in order to overcome single link failure. It will be improved survivability of the virtual networks. Through our experiments, we confirmed that the multi-path creation time of the proposed algorithm has about 50% performance improvement than previous works.