• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.473-477
• /
• 2008

In this paper, we introduce the positioning methods using the grid sensor network. The basic operational principle of grid sensor network can be the wireless communication using the sensor node attached on the objects. Sink node receives the environmental information (e.g., temperature, humidity and so on), and transmits the information to the core database. Since the grid sensor network basically uses wireless communication, it is necessary to observe the place where grid sensor nodes to be installed. In this sense, we carried out the practical measurement on the wireless propagation in an applicable field. In addition, link budget study and SNR estimation works were done in accordance with the results from the measurement.

• Journal of Aerospace System Engineering
• /
• v.9 no.4
• /
• pp.37-42
• /
• 2015

The CubeSats is classified as a pico-class satellite which requires a ground station to track the satellite, transmit commands, and receive an on-orbit data such as SOH (State-of-Health) and mission data according to the operation plan. In order to this, the ground station system has to be properly designed to perform a communication to with the satellite with enough up- and down-link budgets. In this study, a conceptual design of the ground station has been performed for the CubeSat named as STEP Cube Lab. (Cube Laboratory for Space Technology Experimental Project). The paper includes a ground station hardware interface design, a link budget analysis and a ground station software realization. In addition, the operation plan of the ground station has been established considering the STEP Cube Lab. mission requirements.

• Bulletin of the Korean Space Science Society
• /
• 2007.04a
• /
• pp.57-57
• /
• 2007

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.1
• /
• pp.53-64
• /
• 2009

For a realization of the ubiquitous society, applying IT to vehicle industry has recently been an attractive issue to make wireless communication in body area network possible to everywhere. In this paper, we propose the physical layer symbol structure based on PPM scheme of the IEEE 802.15.4a for the off-body high data rate WBAN system. We propose four symbol structures which is classified according to the number of the chip and whether the channel coding is used or not. We calculate the required SNR through the link budget calculation and the recently proposed off-body WBAN channel environment was applied in the simulation. The results of four systems show that small number of burst's chip enhances the performance and the system is capable to achieve the data rate of 10 Mbps.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.10
• /
• pp.1833-1839
• /
• 2017

Korea Railway is enhancing the railway wireless communication system from VHF and TRS which have been used for 100 years to LTE-R starting with Ministry of Science and ICT's allocation of Integrated Public Network Frequency on December 2014. LTE-R has advantages on technology performance, also on ease of evolution based on standardization compared to existing technologies. However there are few problems that need to be solved to provide stable railway wireless services in the future. Due to national spectrum policy, LTE-R has frequency interference with Integrated Public Networks (PS-LTE, LTE-M ) and UHD-TV which was commercialized in 2017. This paper introduces performance changes caused by interferences which were founded from the test bed in Wonju~Gangneung LTE-R project and the result of RAN-Sharing. In addition, this paper suggests the standard for LTE-R cell planning in the case of sharing the Integrated Public Network Frequency by analyzing the changes of designed link-budget factor based on the test result.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.3
• /
• pp.795-806
• /
• 1996

A structure which transmits and receives 3 subscribers packet data through an optical splitter node in an optical subscriber network of PON wave suggested and realized. All the functions which are necessary to use PON structure such as 155.52Mb/s multiplexer/demultiplexer of down-stream signal, 25.92Mb/s multiplexer/demultiplexer of up-stream signal, frame synchronizer, and phase aligner for aligning phase of the clock and received data have been integrated within 2 ICs using CMOS technonology. TDMAtechnology was suggested for up-stream transmission. In the optical up-stream transmission of the urst signals transmissionquality degradataion by APC and AGC of optical tranceiver was observed. By compensating the degradation, more than 17dB of link budget which is enough to satisfy 11.2dBthat is required in SWAN of PON architecture has been obtained with optical transceiver whose power and sensitivity are -17dBm and -34dBm respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1354-1362
• /
• 2015

Heterogeneous network technology is expected to be a core technology for 5G mobile communications. 5G mobile network would be composed of many base stations even have mobility, then the operator should connect base stations through the wireless backhaul technology. This paper presents Ultra Wide Area Wireless Backhaul Network System with massive array antenna. We conducted link budget analysis for Ultra Wide Area Wireless Backhaul Network and performance analysis of massive array antenna system through the transmission simulator based on beamforming technology. In wide area ($10km^2$) wireless backhaul system composed of massive antenna, we achieved 5 bps/Hz average spectral efficiency with 1 W transmission power per beam.

• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.229-235
• /
• 2008

The ground flight termination system(GFTS) could be used for the termination of launch vehicle in flight motion when the launch vehicle deviates from the designated route due to the system malfunction or failure as well as the launch vehicle can't be tracked by the ground tracking system. This paper introduces the basic concept and design of the ground flight termination system to be used for KSLV launch mission in NARO space center. In order to design the optimal ground flight termination system for KSLV launch application, the operational concept reflected on the flight trajectory and system characteristics of KSLV launch vehicle should be considered. Moreover the RF link budget analysis, and the analysis for system availability and reliability are done. Based on the analysis above, the each subsystem of ground flight termination to transmit the termination signal in stable is designed for KSLV launch mission.

• Journal of Advanced Navigation Technology
• /
• v.22 no.2
• /
• pp.76-83
• /
• 2018

In order to prevent overusing the fishing gear and to reduce discarded fishing gear, there is a need for a technique that can efficiently transmit the information including the type and location of the fishing gear and the user's real name to the fishing boat and the control center using IoT-based communication. In order to do this, it is necessary to be able to confirm the position information of a plurality of buoys that can be identified by the base stations on the land. In this paper, in order to service the maritime IoT communication system, we calculate the link budget between the land base station and the targets on the sea to derive the service coverage. To design a marine IoT radio network for building a fishing gear monitoring system, we calculate link budget for wireless service optimization at sea for NB-IoT using 1.8 GHz frequency band and LoRa service using 900 MHz frequency band. In addition, the link budget between the land base station and buoy, the link budget between the land base station and fishing boat are calculated and the results are analyzed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.11
• /
• pp.2932-2941
• /
• 1996

Conventional non-regenerative satellite repeaters do not provide anti-jamming capability enough to provide communications between small terminals in jamming environment. In this paper, we analyze the budget and system requirements for Ka-band satellite communication. For the analysis, we modeled and simulated the Ka-band satellite system based on downlink power limited repeater. Assuming that a spread spectrum is applied for anti-jamming purpose, we also analyzed a tolerable jammer-to-signal power ratio under strong up-link jamming in the bit rates of 2.4Kbps and 19.6Kbps.