• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.2
• /
• pp.1-12
• /
• 2017

The Seoul metropolitan transportation card's high value lies in its recording of total population movements of the public transit system. In case of recorded information on transit by bus, even though route information utilized by each passenger is accurate, the lack of passenger transfer information of the urban railway makes it difficult to estimate correct routes taken by each passenger. Therefore, pinpointing passenger path selection patterns arising in the metropolitan railway network and using this as part of a path movement estimation model is essential. This research seeks to determine that features of passenger movement routes in the urban railway system is comprised of M-similar routes with increasing number of transfer reflected as additional costs. In order to construct the path finding conditions, an M-similar route searching method is proposed, embedded with non additive path cost which appears through inclusion of the stepwise transportation parameter. As well, sensitivity of the M-similar route method based on transportation card records is evaluated and a stochastic trip assignment model using M-similar path finding is constructed. From these, link trip and transfer trip results between lines of the Seoul metropolitan railway are presented.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.218-220
• /
• 2008

Urban air quality, including carbon-dioxide emissions, and national energy security are related issues affecting the rail industry and transportation sector as a whole. They are related by the fact that (in the United States) 97-98% of the energy for the transport sector is based on oil, and more than 60% is imported. A fuelcell locomotive combines the environmental advantages of a catenary-electric locomotive with the higher overall energy efficiency and lower infrastructure costs of a diesel-electric. Catenaryelectric locomotives, when viewed as only one component of a distributed machine that includes an electricity-generating plant and transmission lines, are the least energy-efficient locomotive type. The natural fuel for a fuelcell is hydrogen, which can be produced from many renewable energies and nuclear energy, and thus a hydrogen-fuelcell locomotive will not depend on imported oil for its energy supply. This paper proposes a base models of Hybrid fuel cell/IPT railway vehicle power system, the necessary of this research.

• Proceedings of the KOR-KST Conference
• /
• 1998.09a
• /
• pp.3-16
• /
• 1998

The goal of the transportation policy of Seoul is to increase the ridership of the subway system by constructing the public transportation network, the subway system. To accomplish this goal, the city of Seoul has been constructing the Metropolitan Subway System. Currently, seven subway lines which connect major areas in Seoul are operating. However, the ridership of subway system was not increased as much as we expected, even though more subway lines have been implemented. It seems that although the length of the subway line was extended, the current way of the subway operation that trains stop at every station cannot satisfy the passenger's need. Thus, we should try to increase the demand by providing quicker services and diversifying the subway operations; changing the point of view is required. This paper introduces the distinctive features of the express subway system and the model for analysing the effects of that system. This paper also presents the results for the feasibility study of the express subway system on the 5th Subway Line and Kyong-Eue Railway Line. Based on the results of the case studies, We can conclude as : First, the express system reduces a total travel time by about $13\%$; in particular, the Kyong-Eue Line is more effective than the subway Line ${\sharp}5$. Second, the shorter headway of express trains increases the time saving effects on subway system although it requests more waiting time to low-speed train passengers. When the service frequency is increased from 5 to 7.5 times/hour, total saved time ratio is about $10\%$ in the Subway Line ${\sharp}5$ and about $18\%$ in the Kyong-Eue Line.

• Journal of the Korean Society for Railway
• /
• v.19 no.3
• /
• pp.380-387
• /
• 2016

Considering that the Seoul subway sector is expected to see extension of lines, addition of stations, and changes of operating companies, a review is needed to identify ways to eliminate or minimize financial deficits in its operation. As for deficits from the operation, additional businesses for extra income have been suggested as alternatives, but inasmuch as Western urban development (that of the subway containment area) may not be applicable to Korean settings, a practical alternative is to maximize income by efficient use of rental facilities that are located inside station properties. This alternative requires the estimation of appropriate facility size and rent for each station; few, however, have addressed this topic. At this juncture, this study aimed to draw an equation for estimating the sizes and rents of station properties by reflecting characteristics of lines and locations; a case study was performed for Subway Lines 5 and 6. Analytical findings are that rental facility sizes and rental incomes are affected mainly by the subway ridership and transport revenues, whereas the influence of ground-level commercial activity is relatively weak. A particularly great influence was found to be the value of apartment housing in areas through which the subway lines run. Stations on Line 5, which runs through areas of high-value housing, were assigned smaller facility sizes and higher rents than those on Line 6, which covers areas with relatively low housing value. The equation suggested in this study would make possible more practical feasibility studies when the need arises to estimate sales of new or extended facilities affiliated with stations.

• Geomechanics and Engineering
• /
• v.15 no.2
• /
• pp.769-774
• /
• 2018

The growth of cities requires the construction of new tunnels close to the existing ones. Prediction and control of ground movement around the tunnel are important especially in urban area. The ground respond due to EPB (Earth Pressure Balance) pressure are investigated using the finite element method by ABAQUS in intersection of the triplet tunnels (Line 2, 3 and 4) of Mashhad Urban Railway in Iran. Special attention is paid to the effect of EPB pressure on the tunnel face displacement. The results of the analysis show that in EPB tunneling, surface settlement and face displacement is related to EPB pressure. Moreover, it is found that tunnel construction sequence is a great effect in face displacement value. For this study, this value in Line 4 where is excavated after line 3, is smaller than that line. In addition, the trend of the displacement curves are changed with the depth for all lines where is located in above and below, close to and above the centerline tunnel face for Line 2, 3 and 4, respectively. It is concluded that: (i) the surface settlement decreases with increasing EPB pressure on the tunnel face; (ii) at a constant EPB pressure, the tunnel face displacement values increase with depth. In addition, this is depended on the tunneling sequence; (iii) the trend of the displacement curves change with the depth.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.613-618
• /
• 2011

More than 7 million persons use Seoul Metropolitan Subways (SMS) everyday and the number has been in increasing trend. With the increasing trend of concerns on indoor air quality(IAQ), the management of IAQ has become an important issue, especially in case of subway operators, because most of subway lines are placed underground with poor ventilation condition. The ultimate object of study develop independent cleaning device that reduce efficient fine particle and $CO_2$. Urban subway has characteristics about proper clean air flow, must be installed in narrow space and maintenance cycle has enough time. Two layered electrically pre-charged filters were used for removing particulate matters and gas absorbers are packed between two layer filters for removing gases pollutants such $CO_2$, VOCs and HCHO. Urban subway has characteristics about proper clean air flow, must be installed in narrow space and maintenance cycle has enough time. SCAP prototype is producted as all in one method which decrease fine dust, $CO_2$ and noxious gas. and basic test carry out with quantity of wind, a gap of pressure, sampling efficiency.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1426-1440
• /
• 2008

In Korea, the concentration for the use of urban railroads is comparatively high during peak hours. In case of road traffic, overcrowdness leads the increase of total travel time and cost naturally but this does not happen in railroad systems because of fixed operational interval. Thus, passenger's disutility is generated physically and mentally from congestion increment. The increase of railroad capacity from new transit lines and expansion of existed lines contributes traveler's comfort benefits to rising. However, present evaluation guidelines for feasibility studies of road and railroad projects do not include any valuation methodology about passenger's comfort benefits. Therefore, in this research, various factors affecting comfort benefits are reviewed and stated preference survey is performed in order to estimate traveler's comfort benefits for congestion reduction. In addition, willingness to pay for congestion avoidance is calculated from that stated preference survey based on Tobit Model. As a result, detailed unit for willingness to pay according to congestion reduction is proposed in this study.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1743-1753
• /
• 2011

Seoul Metropolitan Government has performed alternative transit system, light rail transit(LRT), for settling the problems of urban public transit system based on conventional bus service and heavy rail transit(HRT). LRT projects of total 8 lines(about 73.6km), including Ui-Sinseol line, have been planned as Build-Transfer-Operate(BTO) projects. For the first LRT, Ui-Sinseol line, however, design of structure had met standard for design of HRT, because of no domestic design code for LRT when participates of Ui-Sinseol project submitted the design proposal. This case study reports a successful example of LRT design minimizing the scale of stations designed in base of HRT code. The problems, like oversized structures compared with LRT vehicles, excessive costs for construction, had been resolved through negotiations with the participates of Ui-Sinseol line. Result suggests that present and future costs for construction and maintenance of the LRT projects in Seoul be considerably reduced in advance.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.953-957
• /
• 2005

Light Rail Transit(LRT) Systems with transport capacity between subway and bus(5,000-25,000 persons per hour) are being carried on over 100 lines around the world. In Korea, to solve the urban transportation problem, the introduction of LRT system has been proceeded positively. It is planned to develop the Korean standard LRT system in which safety, efficiency and cost effectiveness are emphasized. So we were able to make proto type of Rubber tired AGT system for LRT. This is capable of driverless operation using CBTC(Communication Based Train Control) of Moving Block System and is currently making an experiment for reliability in test-line. This study is focused on verifving the train tracking with CBTC in driverless and ATO mode through implementing the examination.

• Journal of the Society of Disaster Information
• /
• v.18 no.3
• /
• pp.589-599
• /
• 2022

Purpose: The purpose of this study is to quantitatively identify the environmental contribution generated by urban rail users in the metropolitan area. Method: As for the analysis method, the mode choice and assignment of the traffic demand analysis were repeatedly performed on the assumption that each line was not opened for the metropolitan urban railway lines 1 to 9. After that, the environmental contribution according to changes in demand for the road was analyzed. Result: The total amount of carbon dioxide emissions and benefits were found to be the largest for subway line 1. However, when considering the number of stations and length, it was analyzed that the environmental contribution was the greatest in Metro Line 4. Conclusion: Measures to promote the use of public transportation are representative of environmental improvement policies, but there is a limit in that it is difficult for actual users/non-users to feel it. Therefore, it is judged that it is necessary to quantitatively present the effect in order to improve and spread awareness of the environment.