• 제목/요약/키워드: Lines constraint

검색결과 44건 처리시간 0.024초

지형공간정보체계의 이용을 위한 불규칙삼각망 생성기법에 관한 연구 (A Study on Triangulated Irregular Network Generation Method for GSIS)

  • 유복모;장지원;윤정학
    • 한국측량학회지
    • /
    • 제12권2호
    • /
    • pp.209-218
    • /
    • 1994
  • 본 연구는 최근 그 활용도가 증대되어 가는 수치지형모형의 한 형태인 불규칙삼각망을 생성하고자하는 연구이다. 일반적으로 격자형 수치표고모형과 불규칙삼각망은 지형문제를 해결하기 위한 합리적인 방법이다. 그러나, 불규칙삼각망이 격자형 수치표고모형에 비해 자료의 저장이 용이하고, 불규칙한 간격을 가지는 표고 자료를 운용할 수 있는 편리한 자료구조를 가지고 있기 때문에 격자형 수치표고모형의 대안이 될 수 있다. 격자형 수치표고모형으로부터 불규칙삼각망을 생성하는 다양한 방법들이 제시되고, 이러한 자료를 바탕으로 최적의 삼각망을 생성하기 위한 여러 가지의 연산법이 소개되고 있다. 본 연구에서는 새로운 삼각망 생성의 접근방법으로 표고와 가변거리의 연산법을 이용하였고, 인접 문제점을 해결하기 위해 보간점과 임의의 선을 첨가시키므로서 보다 더 실제지형과 가까운 불규칙삼각망을 생성할 수 있었고, 또한 효율적인 자료기반 구축을 가능하게 하여 지형공간정보체계의 활용성을 증대시킬 수 있었다.

  • PDF

자동 모자이크 영상제작을 위한 접합선 추출기법에 관한 연구 (Technique of Seam-Line Extraction for Automatic Image Mosaic Generation)

  • 송낙현;이성훈;오금희;조우석
    • 한국측량학회지
    • /
    • 제25권1호
    • /
    • pp.47-53
    • /
    • 2007
  • 인공위성 영상을 이용하여 한반도 전역과 같이 넓은 지역에 대한 효율적인 영상 판독 및 분석 작업을 수행하기 위해서는 영상모자이크 작업이 필수적으로 요구된다. 본 논문은 영상모자이크 작업시 요구되는 접합선의 자동추출 기법과 이를 기반으로 한 자동 모자이크 영상제작 방법을 제시하였다. 인위적인 불연속을 최소화하는 접합선의 자동 추출기법으로는 검색영역에 대한 제약조건을 고려한 Minimum Absolute Gray Difference Sum 알고리즘과 Canny 에지검출 알고리즘을 함께 적용하였다. 또한 획득시기가 다른 인접영상간의 밝기 차이를 균일하게 유지시키기 위한 히스토그램 매칭 방법으로는 Match Cumulative Frequency 방법을 적용하였다. 본 연구의 결과 에지검출 기법을 통해 도로나 강 등과 같은 선형특성 지형 지물을 접합선으로 선정함으로서 인접영상간의 인위적인 불연속 형성을 최소화 할 수 있었다.

Roc10, a Rice HD-Zip transcription factor gene, modulates lignin biosynthesis for drought tolerance

  • Bang, Seung Woon;Lee, Dong-Keun;Jung, Harin;Chung, Pil Joong;Kim, Youn Shic;Choi, Yang Do;Suh, Joo-Won;Kim, Ju-Kon
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2017년도 9th Asian Crop Science Association conference
    • /
    • pp.159-159
    • /
    • 2017
  • Drought, a common environmental constraint, induces a range of physiological, biochemical and molecular changes in plants, and can cause severe reductions in crop yield. Consequently, understanding the molecular mechanisms of drought tolerance is an important step towards crop biotechnology. Here, we report that the rice (Oryza sativa) homeodomain-leucine zipper class IV transcription factor gene, ${\underline{R}ice}$ ${\underline{o}utermost}$ ${\underline{c}ell-specific}$ gene 10 (Roc10), enhances drought tolerance and grain yield by increasing lignin accumulation in ground tissues. Overexpression of Roc10 in rice significantly increased drought tolerance at the vegetative stages of growth and promoted both more effective photosynthesis and a reduction in water loss rate, compared with non-transgenic controls or RNAi transgenic plants. Importantly, Roc10 overexpressing plants had a higher drought tolerance at the reproductive stage of growth and a higher grain yield compared with the controls under field-drought conditions. Roc10 is mainly expressed in outer cell layers including the epidermis and the vasculature of the shoots, which coincides with areas of cell wall lignification. Roc10 overexpression elevated the expression levels of lignin biosynthetic genes in shoots, with a concomitant increase in the accumulation of lignin, while the overexpression and RNAi lines showed opposite patterns of lignin accumulation. We identified downstream target genes of Roc10 by performing RNA-seq and chromatin immunoprecipitation (ChIP)-seq analyses of shoot tissues. Roc10 was found to directly bind to the promoter of PEROXIDASEN/PEROXIDASE38, a key gene in lignin biosynthesis. Together, our findings suggest that Roc10 confers drought stress tolerance by promoting lignin biosynthesis in ground tissues.

  • PDF

농촌지역 쓰레기 매립장 입지선정에 관한 연구 -경상북도 영양군을 사례로- (Solid Waste Disposal Site Selection in Rural Area: Youngyang-Gun, Kyungpook)

  • 박순호
    • 한국지역지리학회지
    • /
    • 제3권1호
    • /
    • pp.63-80
    • /
    • 1997
  • 본 연구의 목적은 쓰레기 매립장의 입지선정 기준을 정립하고, 경상북도 영양군을 사례로 GIS 기법을 이용하여 실제 쓰레기 매립장의 입지후보지를 선정한 다음, 선정된 후보지를 상호비교하여 적정입지의 요인별 특성을 제시하는 것이다. 분석에 사용된 GIS소프트웨어는 Idrisi모듈인 Multi-Criteria Evaluation(MCE)이다. 영양군 쓰레기 매립장 입지선정에 이용된 입지요인은 경사도, 단층선, 기반암과 인구밀집지역, 상수원, 하천, 범람원, 도로 그리고 휴양관광지와의 거리등 9개 요인이다. 입지요인의 표준화와 요인별 가중치를 이용한 적합도와 배제기준을 적응한 결과 쓰레기 매립장 건립 불가지역은 시가지와 그 인접지역, 산악지역, 하천, 간선도로, 휴양관광지 및 그 인접지역으로 전체면적의 85.3%에 해당하는 $695.08km^2$였다. 쓰레기 매립장 적정입지 후보지로는 수비면 신암리, 청기면 행화리와 무진리 그리고 석보면 포산리등 3개지역 총 25개 지점이 선정되었다.

  • PDF