• 대한조선학회논문집
• /
• 제32권4호
• /
• pp.27-37
• /
• 1995

본 연구에서는 대양을 항행하는 선박의 자동조타 시스템의 정량적 평가, 해석을 위해서 추진 에너지 손실의 관점에서 성능평가지수를 도출하였다. 그 결과 성능평가지수는 침로편차, 타각, 회두각속도의 제곱평균치로써 구성됨을 밝혔고, 아울러 각 제곱평균치의 계수는 선박의 유체역학적 특성에 의해서 결정됨을 알 수 있었다. 또한 성능평가지수는 자동조타 시스템에 불규칙 외란이 입력으로 작용하였을 때, 주파수 응답법과 시뮬레이션 기법에 의해서 정도 높게 계산될 수 있음을 밝혔다. 대표적 해상 상태에서 광석운반선과 소형 어선에 대한 시계산 결과, 주파수 응답법은 작은 외란하에서 시스템이 선형인 경우에는 유용하지만, 비교적 큰 외란하에서 또는 시스템 내부에 비선형 요소가 있는 경우에는 시뮬레이션 기법이 보다 정확하고 유용함을 알 수 있었다.

• 한국전자통신학회논문지
• /
• 제14권4호
• /
• pp.651-656
• /
• 2019

본 논문은 오염물질 제거를 위한 외팔보 엑츄에이터 시스템 구조 및 구현에 관한 연구이다. 건축물의 외벽에 설치되는 외관 자재들 중 특히 유리의 경우 외부 노출로 인해 단기간에 오염이 된다. 이와 같은 오염물질은 미관상의 퇴색은 물론 사용자에게 보건상의 문제를 야기할 수 있다. 또한 최근 신재생에너지원으로 태양광 패널에 대한 수요가 많이 증가되고 있는데, 이와 같은 태양광 패널의 발전량은 먼지 등에 의해 감소될 수 있으며, 입사량의 감소는 결국 발전량을 저해하는 문제를 야기할 수 있기 때문에 먼지와 같은 오염물질을 주기적으로 제거하는 방안이 필요하다. 일반적으로 전문 작업자가 외벽에 붙은 오염물질을 제거하는 경우가 많은데, 안정성을 확보하였다 하더라도 현장에서 발생하는 여러 가지 돌발 변수로 인해 사고가 종종 발생하고 있다. 따라서 이와 같은 단점을 극복하기 위하여 외팔보 엑츄에이터 구조 시스템을 제안하였다. 외팔보 엑츄에이터에 대한 구조적인 시스템을 구성하고 시제품을 제작하여 동작성을 확인하였다. 최종적으로는 외팔보 엑츄에이터의 오염물질 제거에 대한 효용성을 검토하였다.

• 한국산업보건학회지
• /
• 제29권2호
• /
• pp.159-166
• /
• 2019

Objectives: The purpose of this study was to evaluate the personal exposure to $PM_{10}$ by body parts for the development of dust monitoring wearable device for swine farmers. Methods: Tasks were classified by using motion pictures taken by action cameras attached to swine farmers. Concentrations of $PM_{10}$ were measured by attaching direct-reading instruments at the head, neck and waist of worker. Differences of $PM_{10}$ exposure between body parts were analyzed with linear regression. Results: We identified three tasks(vaccination, moving pigs, and manure treatment). $PM_{10}$ concentration during vaccination was the highest among the tasks, and the body part showing the highest concentration of $PM_{10}$ was the waist regardless of task. In all tasks, the closer distance between the body parts, the higher were the R-squared values(vaccination 0.4221, moving pigs 0.6990, and manure treatment 0.2164). Conclusions: We presumed that $PM_{10}$ concentrations were affected by the parts of the body in which they were measured. In order to develop swine farmer's wearable device for monitoring dust concentration in air, the determination of the positions of monitoring sensor to ensure accurate measurement is essential. Considering the results of this study, wearable sensor should be positioned at the waist.

• Smart Structures and Systems
• /
• 제24권3호
• /
• pp.303-317
• /
• 2019

Magneto-rheological fluid (MRF) rotatory dampers are normally used for controlling the constant rotation of machines and engines. In this research, such a device is proposed to act as variable stiffness device to alleviate the rotational oscillation existing in the many engineering applications, such as motor. Under such thought, the main purpose of this work is to characterize the nonlinear torque-angular displacement/angular velocity responses of an MRF based variable stiffness device in oscillatory motion. A rotational hysteresis model, consisting of a rotatory spring, a rotatory viscous damping element and an error function-based hysteresis element, is proposed, which is capable of describing the unique dynamical characteristics of this smart device. To estimate the optimal model parameters, a modified whale optimization algorithm (MWOA) is employed on the captured experimental data of torque, angular displacement and angular velocity under various excitation conditions. In MWOA, a nonlinear algorithm parameter updating mechanism is adopted to replace the traditional linear one, enhancing the global search ability initially and the local search ability at the later stage of the algorithm evolution. Additionally, the immune operation is introduced in the whale individual selection, improving the identification accuracy of solution. Finally, the dynamic testing results are used to validate the performance of the proposed model and the effectiveness of the proposed optimization algorithm.

• 한국의학물리학회지:의학물리
• /
• 제32권2호
• /
• pp.40-49
• /
• 2021

Purpose: This study aimed to develop a surface-guided radiosurgery system customized for a neurosurgery clinic that could be used as an auxiliary system for improving the accuracy, monitoring the movements of patients while performing hypofractionated radiosurgery, and minimizing the geometric misses. Methods: RGB-D cameras were installed in the treatment room and a monitoring system was constructed to perform a three-dimensional (3D) scan of the body surface of the patient and to express it as a point cloud. This could be used to confirm the exact position of the body of the patient and monitor their movements during radiosurgery. The image from the system was matched with the computed tomography (CT) image, and the positional accuracy was compared and analyzed in relation to the existing system to evaluate the accuracy of the setup. Results: The user interface was configured to register the patient and display the setup image to position the setup location by matching the 3D points on the body of the patient with the CT image. The error rate for the position difference was within 1-mm distance (min, -0.21 mm; max, 0.63 mm). Compared with the existing system, the differences were found to be as follows: x=0.08 mm, y=0.13 mm, and z=0.26 mm. Conclusions: We developed a surface-guided repositioning and monitoring system that can be customized and applied in a radiation surgery environment with an existing linear accelerator. It was confirmed that this system could be easily applied for accurate patient repositioning and inter-treatment motion monitoring.

• Steel and Composite Structures
• /
• 제39권1호
• /
• pp.95-107
• /
• 2021

In this work, the dynamic response of functionally graded beams on variable elastic foundations is studied using a novel higher-order shear deformation theory (HSDT). Unlike the conventional HSDT, the present one has a new displacement field which introduces undetermined integral variables. The FG beams were assumed to be supported on Winkler-Pasternak type foundations in which the Winkler modulus is supposed to be variable in the length of the beam. The variable rigidity of the elastic foundation is assumed to be linear, parabolic and sinusoidal along the length of the beam. The material properties of the FG porous beam vary according to a power law distribution in terms of the volume fraction of the constituents. The equations of motion are determined using the virtual working principle. For the analytical solution, Navier method is used to solve the governing equations for simply supported porous FG beams. Numerical results of the present theory for the free vibration of FG beams resting on elastic foundations are presented and compared to existing solutions in the literature. A parametric study will be detailed to investigate the effects of several parameters such as gradient index, thickness ratio, porosity factor and foundation parameters on the frequency response of porous FG beams.

• Ocean Systems Engineering
• /
• 제11권1호
• /
• pp.17-42
• /
• 2021

Articulated loading platforms (ALPs) belongs to a class of offshore structures known as compliant. ALP motions have time periods falling in the wind excitation frequency range due to their compliant behaviour. This paper deals with the dynamic behavior of a double hinged ALP subjected to low-frequency wind forces with random waves. Nonlinear effects due to variable submergence, fluctuating buoyancy, variable added mass, and hydrodynamic forces are considered in the analysis. The random sea state is characterized by the Pierson-Moskowitz (P-M) spectrum. The wave forces on the submerged elements of the platform's shaft are calculated using Morison's Equation with Airy's linear wave theory ignoring diffraction effects. The fluctuating wind load has been estimated using Ochi and Shin wind velocity spectrum for offshore structures. The nonlinear dynamic equation of motion is solved in the time domain by the Wilson-θ method. The wind-structure interactions, along with the effect of various other parameters on the platform response, are investigated. The effect of offset of aerodynamic center (A.C.) with the center of gravity (C.G.) of platform superstructure has also been investigated. The outcome of the analyses indicates that low-frequency wind forces affect the response of ALP to a large extent, which otherwise is not enhanced in the presence of only waves. The mean wind modifies the mean position of the platform surge response to the positive side, causing an offset. Various power spectral densities (PSDs) under high and moderate sea states show that apart from the significant peak occurring at the two natural frequencies, other prominent peaks also appear at very low frequencies showing the influence of wind on the response.

• 한국해양공학회지
• /
• 제35권4호
• /
• pp.266-272
• /
• 2021

Mooring systems are among the most important elements employed to control the motion of floating offshore structures on the sea. Considering the use of polymer material, a new method is proposed to address the creep characteristics rather than the method of using a tension load cell for measuring the tension of the mooring line. This study uses a synthetic mooring rope made from a polymer material, which usually consists of three parts: center, eye, and splice, and which makes a joint for two successive ropes. We integrate the optical sensor into the synthetic mooring ropes to measure the rope tension. The different structure of the mooring line in the longitudinal direction can be used to measure the loads with the entire mooring configuration in series, which can be defined as SMART (Smart Mooring and Riser Truncation) mooring. To determine the characteristics of the basic SMART mooring, a SMART mooring with a diameter of 3 mm made of three different polymer materials is observed to change the wavelength that responds as the length changes. By performing the longitudinal tension experiment using three different SMART moorings, it was confirmed that there were linear wavelength changes in the response characteristics of the 3-mm-diameter SMART moorings. A 54-mm-diameter SMART mooring is produced to measure the response of longitudinal tension on the center, eye, and splice of the mooring, and a longitudinal tension of 100 t in step-by-step applied for the Maintained Test and Fatigue Cycle Test is conducted. By performing a longitudinal tension experiment, wavelength changes were detected in the center, eye, and splice position of the SMART moorings. The results obtained from each part of the installed sensors indicated a different strain measurement depending on the position of the SMART moorings. The variation of the strain measurement with the position was more than twice the result of the difference measurement, while the applied external load increased step-by-step. It appears that there is a correlation with an externally generated longitudinal tensional force depending on the cross-sectional area of each part of the SMART mooring.

• 한국전자통신학회논문지
• /
• 제17권3호
• /
• pp.507-514
• /
• 2022

가정에서 사람을 보조하기 위해 이동과 작업이 모두 가능한 모바일 매니퓰레이터의 필요성이 커지고 있다. 본 논문에서는 크기가 작고 낮은 가격으로 구성할 수 있는 모바일 매니퓰레이터를 개발하기 위해 모바일 로봇에 탑재할 수 있는 소형 매니퓰레이터 시스템을 개발하였다. 개발한 매니퓰레이터는 4자유도를 가지며, 끝단에 그리퍼와 카메라를 부착하여 물체의 인식과 인식한 물체에 대한 작업 수행이 가능하다. 개발한 매니퓰레이터는 수직 방향의 선형 이동이 가능하여 상대적으로 높이 위치한 사람의 손에 물건을 전달하거나 협업을 수행하는 데 유리하다. 개발한 매니퓰레이터의 4자유도 동작을 위한 4개의 액츄에이터를 매니퓰레이터의 베이스에 가깝게 배치하고 매니퓰레이터의 회전 관성을 줄임으로써 매니퓰레이터의 작업 중 안정성을 높이고 모바일 매니퓰레이터의 전복 위험을 낮추었다. 개발한 매니퓰레이터의 끝단에 위치한 카메라에서 RGB 영상을 획득하고 영상처리를 통해 물체를 인식하여 목표한 위치로 옮기는 픽 앤 플레이스 동작을 시험하였으며 로봇의 작업영역(workspace) 내에서 성공적으로 동작함을 확인하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.554-565
• /
• 2021

Air bubble entrainment is a phenomenon that can significantly reduce the efficiency of liquid motion in piping systems. In the present study, the bubble formation mechanism in a globe valve with 90% water fraction flow is explained by visualization study and pressure oscillation analysis. The shadowgraph imaging technique is applied to illustrate the unsteady flow inside the transparent valve. This helps to study the effect of bubbles induced by the globe valve on pressure distribution and valve flow coefficient. International Society of Automation (ISA) recommends locations for measuring pressure drop of the valve to determine its flow coefficient. This paper presents the comparison of the pressures at different locations along with the upstream and the downstream of the valve with the values at recommended positions by the ISA standard. The results show that in partially filled pipe flow, the discrepancies in pressure between different measurement locations in the valve downstream are significant at valve openings less than 30%. The aerated flow induces the oscillation in pressure and flow rate, which leads to the fluctuation in the flow coefficient of the valve. The flow coefficients have a linear relationship with the Reynolds number. For the same increase of Reynolds number, the flow coefficients grow faster with larger valve openings and level off at the opening of 50%.