• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1099-1100
• /
• 2011

This study deals with the dynamic characteristics analysis of Linear Induction Motor (LIM) using finite element method in which the moving mesh technique is considered. The focus of this paper is to show the appropriate of on-line observer system for position sensorless control of a LIM under the phase asymmetry, saturation and iron loss. Comparisons are given with angle of the observer and that of proposed FEA method of linear induction motor, respectively. The position sensorless control system is realized, and the effective of the observer system is verified by experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.626-629
• /
• 1997

The urban transit propelled by single sided linear induction motor(SLIM) have been in stage for practical application. Also, the use of the linear induction motor in traction systems enables large forces to be achieved without friction between wheels and rails. In this paper we discuss the linear induction motor (LIM) drive system (300KVA) for magnetic levitation vehicles.

• 조명전기설비학회논문지
• /
• 제17권5호
• /
• pp.29-35
• /
• 2003

본 논문에서는 유전 알고리즘과 신경 회로망을 이용하여 선형유도전동기의 최적화 설계 방법에 대하여 연구하였다. 최대 추력 및 추력/중량을 목적함수로 하여 유전알고리즘, 신경회로망, 유전알고리즘과 신경회로망의 합성에 의한 방법으로 선형유도전동기의 최적설계를 한 결과 제안한 방법이 가장 우수함을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.46-48
• /
• 1999

This paper presents the design and characteristics analysis of a linear induction motor applied to molten metals. A linear induction motor is designed to increased to thrust and is applied to the experimental instrument. The experiment shows the availability of the LIM for transferring the molten metals.

• 대한전기학회논문지
• /
• 제43권6호
• /
• pp.885-895
• /
• 1994

In this paper, we propose the one-Ampere conductor method which is able to calculate the flux distribution conceptually and easily, and the improved winding method which suppresses space harmonics of magnetormotive force and enhances the coefficient of utilization of primary iron core in tubular linear induction motor. We carry out no-load test to verify effectiveness of proposed method and analyze characteristics by finite element method. As a result, performances are improved and propriety of primary iron core is enhanced comparing with conventional model.

• Journal of Electrical Engineering and Technology
• /
• 제7권1호
• /
• pp.34-45
• /
• 2012

In the present paper, the mover speed control of a linear induction motor (LIM) using a sliding mode control design is proposed, considering the end effects. First, the indirect field-oriented control LIM is derived, considering the end effects. The sliding mode control design is then investigated to achieve speed- and flux-tracking under load thrust force disturbance. The numerical simulation results of the proposed scheme present good performances in comparison to that of the classical sliding mode control.

• Journal of Power Electronics
• /
• 제11권5호
• /
• pp.697-703
• /
• 2011

In this paper a control system with a high performance dynamic response for linear induction motors (LIMs) is proposed which takes into account the end-effect in both the machine model and the control system. Primary flux oriented control has two major drawbacks i.e. a lack of decoupling of the thrust and the flux and a possibility of system instability due to the end-effect. Both of these drawbacks have been dealt with in this paper. A flux estimation method is proposed to correct the flux orientation error caused by the end effect. Extensive motor performance evaluations under the proposed control system prove its superiority over conventional vector control.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.726-728
• /
• 2003

A linear induction motor conveyance system with longitudinal and transverse rails is manufactured. which is controlled by programmable logic controller(PLC). The linear induction motor has a cage-type secondary and the total number of the installed primaries is 10. Four secondaries are installed on the below surface of the moving carrier. In this paper, the developed conveyance system is introduced and its PLC control characteristics for the longitudial and transverse moving directions are presented.

• 조명전기설비학회논문지
• /
• 제19권5호
• /
• pp.68-73
• /
• 2005

본 논문은 선형유도전동기를 이용한 전자기펌프의 특성해석에 대하여 연구한 것이다. 전자기 펌프는 선형유도전 동기의 추진력에 의하여 용융 금속을 이송할 수 있다. 추진력을 높이기 위해 유전 알고리즘을 사용하여 최대 추력을 가지는 선형유도전동기를 설계 하고, 선형유도전동기를 이용한 전자기 펌프의 특성해석을 유동해석에 의하여 분석하였다.

• 대한기계학회논문집A
• /
• 제28권11호
• /
• pp.1733-1740
• /
• 2004

In the transverse flux linear induction motor(TFLIM) with the general secondary composed of conductor and back-yoke, there exists a magnetized force into the normal direction or the air-gap direction of the thrust motion as well as the thrust force. Therefore, the various methodologies have been tried to use the normal force by the two independent control variables of the multi-phase input. But, as the force depends inevitably and strongly on the thrust force, it is essential to decouple both forces for two control index. In this paper, we suggest a novel approach capable of compensating the couple between both forces and the control index by using the DC-biased multi-phase input, and then realizing the independent control of TFLIM.