• 한국항행학회논문지
• /
• 제22권2호
• /
• pp.123-132
• /
• 2018

본 논문에서는 교차편파 격리도(XPI; cross polarization isolation)를 개선한 이중선형 편파시뉴어스 안테나를 설계 및 제작하였다. 제안된 시뉴어스 안테나는 이중선형 편파 발생을 위해 4개의 암(arm) 방사체로 구성되며, 클로펜스타인 테이퍼(Klopfenstein taper) 구조의 광대역 마이크로스트립 발룬을 통해 급전된다. 또한 후방 반사파 감소를 위해 2단 원통형 캐비티 구조를 적용하였다. 캐비티 내부에는 반사파에 의한 성능 저하를 감소시키기 위해 허니컴 형태의 흡수체를 삽입하였다. 설계된 시뉴어스 안테나는 저대역에서의 교차편파 격리도를 개선하기 위해 최외각 암패턴과 캐비티의 림(rim) 사이에 저항을 적용하였다. 제작된 안테나는 저대역에서 교차편파 격리도가 개선되어 편파 측정을 위한 안테나로 적용 가능함을 확인하였다.

• 한국지능시스템학회논문지
• /
• 제25권5호
• /
• pp.477-482
• /
• 2015

단기풍속 예측을 위한 진화적 선형 및 비선형 회귀분석 기반의 보정 기법을 비교한다. 모델의 체계적 오류를 교정하기 위한 효율적인 MOS(Model Output Statistics)의 개발이 필요하나, 기존의 선형회귀분석 기반의 보정기법은 다양한 기상요소의 복잡한 비선형 특성을 반영하기 힘들다. 이를 개선하기 위해서 유전 프로그래밍을 사용하여 풍속 예측에 대한 비선형 보정 수식을 생성하는 기법을 제안하고 기본 다중선형회귀분석법 및 Ridge, Lasso 회귀분석법과 비교한다. 더불어, 선형회귀분석법과 진화적 비선형회귀분석 기법의 인자 선택의 차이와 유사성을 비교하고 분석한다. 2007년~2013년의 KLAPS(Korea Local Analysis and Prediction System) 재분석자료를 사용하여 제주도와 부산지역의 격자점에 대한 실험을 수행한다.

• 한국항공우주학회지
• /
• 제45권5호
• /
• pp.393-400
• /
• 2017

본 논문에서는 회전익 무인항공기의 조종성 평가를 수행하기 위한 가상모의시험용 프로그램을 MATLAB GUIDE(Graphic User Interface Development Environment)를 활용하여 개발하였다. ADS-33E에 기반을 둔 조종성 평가 프로그램은 비행제어시스템을 개발하고 조종성을 평가하는 데에 있어 시간과 비용을 경감시킬 수 있을 것으로 사료된다. 또한, Linear Quadratic Regulator(LQR)기반의 Linear Quadratic Tracker with Integrator(LQTI) 자세제어기를 BO-105C 회전익 항공기에 적용하여 조종성을 평가하고 Q와 R의 가중치에 따른 조종성에 대한 경향을 분석하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.449-450
• /
• 2006

Development of a feed drive system with high speed, positioning accuracy and thrust has been an important issue in modern automation systems and machine tools. Linear motors can be used as an efficient system to achieve such technical demands. By eliminating mechanical transmission mechanisms such as ball screw or rack-pinion, much higher speeds and greater acceleration can be achieved without backlash or excessive friction. However, an important disadvantage of linear motor system is its high power loss and heating up of motor and neighboring machine components on operation. For the application of the linear motors to precision machine tools an effective cooling method and thermal optimizing measures are required. In this paper presents an investigation into a thermal behavior of linear motor cooling plate. FVM employed to analyze the thermal behavior of the linear motor cooling plate, using the ANSYS-CFX.

• 대한산업공학회지
• /
• 제17권2호
• /
• pp.131-142
• /
• 1991

The concept of criterion function is proposed as a framework for comparing the geometric and computational characteristics of various nonlinear programming approaches to linear programming such as the method of centers, Karmakar's algorithm and the gravitational method. Also, we discuss various computational issues involved in obtaining an efficient parallel implementation of these methods. Clearly, the most time consuming part in solving a linear programming problem is the direction finding procedure, where we obtain an improving direction. In most cases, finding an improving direction is equivalent to solving a simple optimization problem defined at the current feasible solution. Again, this simple optimization problem can be seen as a least squares problem, and the computational effort in solving the least squares problem is, in fact, same as the effort as in solving a system of linear equations. Hence, getting a solution to a system of linear equations fast is very important in solving a linear programming problem efficiently. For solving system of linear equations on parallel computing machines, an iterative method seems more adequate than direct methods. Therefore, we propose one possible strategy for getting an efficient parallel implementation of an iterative method for solving a system of equations and present the summary of computational experiment performed on transputer based parallel computing board installed on IBM PC.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권6호
• /
• pp.109-116
• /
• 2020

The study examines the nexus between financial development and economic growth in India during Q1: 1996 to Q3: 2018. This study employs time-series data of real GDP and ratio of broad money to GDP as a proxy for economic and financial development, respectively. The data are obtained from RBI database on the Indian economy. All variables are seasonally adjusted using X12-arima technique and expressed in natural logarithm form. Non-linear Autoregressive Distributed Lag (NARDL) bound test has been used to check for cointegrating relationship of these two variables. Empirical findings suggest that, unlike in the short run, in the long run financial development does impact economic growth positively. Further, a symmetric effect of positive and negative components of financial development is found for the Indian economy, whereas the effect of control variable like exchange rate and trade openness is in consonance with common economic intuition. Exchange rate is in consonance with intuitive economic logic that a fall in exchange rate makes exports cheaper and increases the quantity of export, which improves the balance of payment and leads to a rise in aggregate demand, hence improves economic growth. This paper contributes to the existing literature on India by breaking down financial indicator into positive and negative components to examine the finance-growth relationship.

• 한국군사과학기술학회지
• /
• 제24권1호
• /
• pp.70-78
• /
• 2021

Naval surface ships and submarines could be exposed to non-contact underwater explosion(UNDEX) environment. Equipment installed on the ships and submarines could be damaged by shock load generated by UNDEX environment. Therefore, shock survivability of equipment generally evaluated by shock tests. Ground based shock test machine such as Light weight shock test machine(LVSM) is developed to simulate shock load caused by UNDEX environment. In this study, linear dynamic model of LVSM is proposed and evaluated to improve shock test design procedure. Parameters of the model are decided by optimizing time domain response compared to zero payload experiment. Proposed model is verified by comparing simulation results and test results of maximum payload experiment. Finally, shock test design using the model is described for various test equipment weight.

• Journal of Power Electronics
• /
• 제1권1호
• /
• pp.1-8
• /
• 2001

The elimination of a pole sensor is desirable due to the low-cost requirement, the compactness, and the applied drives. This paper proposes the algorithm for the initial pole-position estimation of a surface permanent magnet linear synchronous motor (PM-LSM), which is carried out under the closed loop control without a pole sensor and is insensitive to the motor parameters. This algorithm is based on the principle that the initial pole position (IPP) is estimated by the trigonometric function of the two reference currents. The effectiveness of the proposed algorithm is confirmed by testing a surface PM-LSM with large disturbance, which result shows that IPP is well estimated within a satisfied moving-distance and a shorter estimation taken-time even if large disturbance such as cogging and friction is existed.

• Transactions on Control, Automation and Systems Engineering
• /
• 제2권3호
• /
• pp.214-219
• /
• 2000

This paper presents a recoil and counter recoil motion measurement system using linear variable differential transformers (LVDT). The output of the LVDT is obtained from the differential voltage of the secondary transformers. Since a transducer core is attached to the motion body, the output is directly proportional to the movement length of the core. Displacement, velocity and acceleration are measured from the LVDT. With a comparison between the measurement result and the reference value obtained by the highly accurate Vernier calipers, it is proved that the measurement system with the LVDT is applicable to the test of the moving part of the mechanism with better accuracy.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.33-34
• /
• 2006

The most bottleneck of development of automation excavator system is the making mathematical linear model. Because of non-linear of control circuit, cylinder, join in hydraulic circuit, and heavy loading so on. Therefore, whatever robust controller is designed, real experimentation is necessary. But, a real experimentation has many risks. The excavator is expensive and large size. Therefore a development of experimentation system is difficult and not safe. Specially, there have a difficulty, because of big noise. So, on experimentation is difficult in school. Manufacturing pneumatic excavator modeland using system identification, design a system transfer function in this paper. Also, planning m-PID Controller using CDM, and examining usefulness applied to actuality model.