• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.321-326
• /
• 2007

The joined-wing is a new concept of the airplane wing. The fore-wing and the aft-wing arc joined together in the joined-wing. The range and loiter are longer than those of a conventional wing. The joined-wing can lead to increased aerodynamic performances and reduction of the structural weight. The structural behavior of the joined-wing has a high geometric nonlinearity according to the external loads. The gust loads are the most critical loading conditions in the structural design of the joined-wing. The nonlinear behavior should be considered in the optimization of the joined-wing. It is well known that conventional nonlinear response optimization is extremely expensive: therefore, the conventional method is almost impossible to use in large scale structures such as the joined-wing. In this research, geometric nonlinear response structural optimization is carried out using equivalent loads. Equivalent loads are the load sets which generate the same response field in linear analysis as that from nonlinear analysis. In the equivalent loads method, the external loads are transformed to the equivalent loads (EL) for linear static analysis, and linear response optimization is carried out based on the EL.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.208-215
• /
• 2001

An experimental method to investigate the dynamic charasteristics of buoys in extreme environmental condition is established. Because the buoy model requires a resonable size for accurate experiment, the test condition in model basin that satisfies the similarity law is hardly met with capability of test facilities. It is suggested that the linear wave component that is unable to satisy similarity is separated with others. The model experiment can be carried out with mitigated condition for the linear wave components while others including wave drift, current and wind are keeping the similarities. Then the result is extrapolated to give the dynamic behavior of buoys in extreme condition because linear wave component is soley responsible to oscillatory buoy motion and other environmental components are applied as a initial tension. the similarity for current and wind conditions is viewed as equivalence of restoring forces. the validity of proposed method is examined with different types of standard ocean buoys and it indicates that the linearity of measured characteristics is assured with a limitation of resonable distance between test and estimated wave conditions.

• Advances in nano research
• /
• 제6권4호
• /
• pp.399-422
• /
• 2018

Unwanted vibration is an issue in many industrial systems, especially in nano-devices. There are many ways to compensate these unwanted vibrations based on the results of the past researches. Elastic medium and smart material etc. are effective methods to restrain unnecessary vibration. In this manuscript, dynamic analysis of viscoelastic nanosensor which is made of functionally graded (FGM) nanobeams is investigated. It is assumed that, the shaft is flexible. The system is modeled based on Timoshenko beam theory and also environmental condition, external linear varying loads and thermal loading effect are considered. The equations of motion are extracted by using energy method and Hamilton principle to describe the translational and shear deformation's behavior of the system. Governing equations of motion are extracted by supplementing Eringen's nonlocal theory. Finally vibration behavior of system especially the frequency of system is developed by implementation Semi-analytical differential transformed method (DTM). The results are validated in the researches that have been done in the past and shows good agreement with them.

• Earthquakes and Structures
• /
• 제23권1호
• /
• pp.13-21
• /
• 2022

Masonry constructions exhibit uncertain behaviors under dynamic effects such as seismic action. Complex issues arise in the idealization of structural systems of buildings having different material types and mechanical properties. In this study, the structural behavior of a vaulted masonry building constructed using full clay brick and lime-based mortar and sitting on consecutive arches was investigated by experimental and numerical approaches. The dimensions of the structure built in the laboratory were 391 × 196 cm, and its height was 234 cm. An incremental repetitive loading was applied to the prototype construction model. Along the gradually increasing loading pattern, the load-displacement curves of the masonry structure were obtained with the assistance of eight linear displacement transducers. In addition, crack formation areas, and relevant causes of its formation were determined. The experimental model was idealized using the finite element method, and numerical analyses were performed for the area considered as linear being under similar loading effect. From the linear analyses, the displacement values and stress distribution of the numerical model were obtained. In addition, the effects of tie members, frequently being used in the supports of curved load-bearing elements, on the structural behavior were examined. Consequently, the experimental and numerical analysis results were comparatively evaluated.

• 응용통계연구
• /
• 제20권1호
• /
• pp.133-145
• /
• 2007

국소선형 추정량은 여러 면에서 바람직한 특성을 많이 갖고 있는 좋은 추정량이다. 그러나 자료가 희박한 부분에서는 매우 불안정한 추정값을 갖게 되는 문제가 있음이 밝혀졌으며, 이 문제를 해결하기 위한 여러 방안이 많이 연구되었다. 그러나 이항반응변수를 위한 국소선형 추정량의 변형이라고 할 수 있는 국소선형 준가능도 추정량에 대해서는 아직 자료의 희박성 문제가 다루어지지 않고 있었다. 이 논문에서는 국소선형 준가능도 추정량이 갖고 있는 자료의 희박성 문제를 인식하고, 몇 가지 해결방안을 제시하였으며, 모의 실험을 통하여 가장 효과적인 방안을 선택하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.677-682
• /
• 2003

The non-linear dynamic characteristics of a semi-circular pipe conveying fluid are investigated when the pipe is clamped at both ends. To consider the geometric non-linearity for the radial and circumferential displacements, this study adopts the Lagrange strain theory for large deformation and the extensible dynamics based on the Euler-Bernoulli beam theory for slenderness assumption. By using the Hamilton principle, the non-linear partial differential equations are derived for the in-plane motions of the pipe, considering the fluid inertia forces as a kind of non-conservative forces. The linear and non-linear terms in the governing equations are compared with those in the previous study, and some significant differences are discussed. To investigate the dynamic characteristics of the system, the discretized equations of motion are derived form the Galerkin method. The natural frequencies varying with the flow velocity are computed fen the two cases, which one is the linear problem and the other is the linearized problem in the neighborhood of the equilibrium position. Finally, the time responses at various flow velocities are directly computed by using the generalized- method. From these results, we should to describe the non-linear behavior to analyze dynamics of a semi-circular pipe conveying fluid more precisely.

• 한국지진공학회논문집
• /
• 제3권2호
• /
• pp.87-96
• /
• 1999

시간영역에서의 구조물의 해석은 직접적분법과 모드중첩법에 의하여 구해질 수 있다 그 중에서도 모드중첩법에 의한 해석방법은 몇가지 저차 진동모드를 사용하여 비교적 정확한 해를 구할 수 있기 때문에 동적해석에 널리 사용되고 있다, 그러나 비선형해석에서는 각 부재들의 상태에 따라 강성이 달라지므로 고유 진동모드를 정의할수 없거나 변화되는 강성에 따라 고유진동 모드를 지속적으로 다시 구하여야 하는 불편 있으므로 모드 중첩법을 이용한 비선형해석은 완전탄소성모델 등 극히 제한된 조건에서만 실행이 가능하였다 본논문에서는 강성행렬을 각 부재별로 분리시키고 비선형복원력과 초기선형복언력과 초기선형복원력의 차이를 하중항에 반영시킴으로써 모드중첩법을 이용하여 비선형 해석은완전탄소성모델 등 극히 제한된 조건에서만 실행이 가능하였다 본 논문에서는 강성행렬을 각 부재별로 분리시키고 비선형 복원력과 초기선형복원력의 차이를 하중항에 반영시킴으로써 모드중첩법을 이용하여 비선형해석이 가능한 방법을 제시하고자 한다. 특히 각 부재 강성을 각 부재의 상대변위의 함수로 나타냄으로써 연속적인 계산이 가능하게 하였다 본 논문에서 제시된 방법은 전단보모델에 적용하였으며 모드 개수를 변화시켜 지진하중에 의한 최대변위를 계산하여 이를 직접적분버에 의한 결과와 비교하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.536-539
• /
• 2004

This paper focues on the flexural behavior of RC beams externally reinforced using Carbon Fiber Reinforced Plastics plates. (CFRP) A non-linear finite element (FE) analysis is proposed in order to complete the experimental analysis of the flexural behaviour of the beams. This paper is a part of a complete program aiming to set up design formulate to predict the strength of CFRP strengthende beams, particularly when premature failure through plates-end shear or concrete cover delamination occurs. An elasto-plastic behaviour is assumed for reinforced concrete and interface elements are used to model the bond and slip.

• Structural Engineering and Mechanics
• /
• 제2권3호
• /
• pp.227-244
• /
• 1994

The purpose of this investigation is to propose a numerical simulation method of the crack propagation behavior in 3-dimensionl elastic body. The simulation method is based on the displacement-type finite element method, and the linear fracture theory is introduced. The results from the proposed method are compared with those from the structural experiments, and the good coincidences between them are shown in this paper. At the same time, 2-dimensional analysis is also done, and the results are compared with those obtained from 3-dimensional analysis and the structural experiments.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.604-607
• /
• 2003

Recently, hybrid concrete structures such as a concrete-filled steel tubular(CFT), a steel reinforced concrete(SRC) and a composite material are popular in structure applications. They also have merit of high strength, high ductility, and large energy absorption capacity. But the analysis of hybrid concrete structures is very difficult owing to the complex behavior of concrete under passive confinement. This paper has analyzed CFT, which receives passive confinement using Tri-Surface concrete model for three dimension finite element analysis. By the result of that, the proposed model was properly forecasted a concrete behavior that receives passive restraint as well as non-linear analysis of concrete which receive uniaxial stress and high active confinement of 400Mpa. If the model through the steady study is set up especially on the factor of concrete under passive confinement, the proposed concrete model will be surely useful for analysis of the hybrid concrete structures.