• 대한기계학회논문집A
• /
• 제30권2호
• /
• pp.171-178
• /
• 2006

Experimental and theoretical study of the non-planar response motions of a circular cantilever beam subject to base harmonic excitation has been presented in this paper work. Theoretical research is conducted using two non-linear coupled integral-differential equations of motion. These equations contain cubic linearities due do curvature term and inertial term. A combination of the Galerkin procedure and the method of multiple scales are used to construct a first-order uniform expansion for the case of one-to-one resonance. The results show that the non-linear geometric terms are very important for the low-frequency modes of the first and second mode. The non-linear inertia terms are also important for the high-frequency modes. We present the quantitative and qualitative results for non-planar motions of the dynamic behavior.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권1호
• /
• pp.171-177
• /
• 2002

The viscoelastic dampers are considered to be one of the most efficient means of upgrading existing structures against seismic loads. Generally in the dynamic analysis of a structure with added viscoelastic dampers the internal forces of the dampers are represented by constants that are linearly proportional to displacement and velocity. The purpose of this study is to verify the validity of the linear Kelvin model by comparing the results from the linear analysis with those obtained from the more rigorous nonlinear model such as fractional derivative model. According to the results the structural responses of 1-DOF structure obtained using the linear model are very close to those obtained from nonlinear model. However for multi-D0F structure the difference between the results from both models is enlarged as a results of the assumptions associated with the linear modeling of the viscoelastic dampers.

• 대한토목학회논문집
• /
• 제33권3호
• /
• pp.833-841
• /
• 2013

복합재료의 경우 다양한 재료에 따라 제작이 가능하며 이들 완성재료의 경우 다양한 재료특성을 나타낸다. 이 연구는 건설용 FRP복합재료의 재료특성 중 선형거동이 뚜렷이 나타나는 인장, 압축과는 달리 비선형 거동이 발생되는 전단거동 특성에 대한 실험적 연구로서 ASTM D4255 규정에 의한 2-Rail 전단시험 방법을 토대로 각각의 시편들을 제작, 실험결과를 분석하였다. 고려된 실험변수로는 함침 수지류의 종류와 섬유 체적비, 섬유배열 방향 및 온도 특성, 공장용 생산제품의 균질성 등을 고려하였다. 섬유배열 방향에 따른 특성조사의 경우 섬유 배열방향을 $0^{\circ}$, $30^{\circ}$, $45^{\circ}$, $60^{\circ}$로 각각 시편을 제작하였으며, 온도에 따른 외부환경 변화에 의한 FRP재료의 전단거동을 조사하기 위하여 실험온도를 $25^{\circ}C$, $40^{\circ}C$, $60^{\circ}C$, $80^{\circ}C$로 각각 고려하여 시험을 수행하였다. 이 연구를 통하여 대부분의 복합재료 시편에서 비선형 전단거동이 확인되었으며 비닐에스테르수지를 사용하고, 높은 섬유체적비와 $45^{\circ}$의 섬유배열방향을 가진 시편에서 비선형 전단거동이 가장 두드러지게 나타나는 것으로 조사되었다. 온도변화에 따른 실험결과의 경우, 온도가 증가함에 따라 전단 내 비선형 거동의 감소가 나타났으며 공장용 제작제품의 경우 hand lay-up 제작시편에 비하여 비선형 전단거동이 비교적 동등하게 나타냈다.

• 한국터널지하공간학회 논문집
• /
• 제10권3호
• /
• pp.233-243
• /
• 2008

터널 건설시 조사 및 설계 단계에서 예측한 터널의 거동은 지반의 지질 구조 및 재료 특성의 복잡함 등으로 인해 실제 시공 중의 거동과 일치하지 않는 경우가 많다. 따라서 시공 중에는 관찰과 계측을 통하여 지반과 지보재의 거동을 확인하고 위험이 예상될 경우 신속히 굴착 방법 및 보강 방법 등을 변경하므로써 터널의 안정성을 확보해야 한다. 그리고 이러한 목적을 위해서는 가급적 굴착 초기 단계에서 터널의 변형 거동을 파악하고 이로부터 최종적인 변위를 예측하는 과정이 필요하다. 본 연구에서는 NATM 방식에 의해 시공 중인 국내 두 곳의 도로터널 현장에서 수집한 변위 계측 data를 분석하여 굴착 초기 측정 내공변위량과 최종 내공변위량과의 관계를 통계적으로 유도하였다. 이 때 굴착 후 계측 전 까지 미측정 내공변위량을 추정하기 위하여 기존의 근사함수식을 수정하여 회귀분석하는 방법과 본 연구에서 제안하는 막장거리 1D(D:터널직경)까지의 계측 data를 이용하여 현장에서 용이하게 적용할 수 있는 간단한 선형 회귀분석을 이용하는 방법을 적용하였다. 최종적으로, 계측 전 변위량을 포함한 굴착 초기 내공변위와 최종 내공변위와의 관계를 통계적 방법을 통해 선형관계식으로 근사적으로 표현할 수 있었으며, 이 때 계측 전 변위량 추정방법으로 지수함수를 이용한 경우와 선형 회귀분석을 이용한 경우에 대해서 결과의 차이는 그다지 크지 않은 것으로 나타났다.

• 대한교통학회지
• /
• 제6권1호
• /
• pp.17-31
• /
• 1988

In this research, the behavior of weaving traffic is studied in terms of lane-changing behavior and gap acceptance characteristics. General trends in lane-changing behavior and gap acceptance characteristics are investigated by analyzing descriptive statistics and the factors affecting weaving behavior are determined by means of the multiple linear regression analysis. The results of analysis show that the behavior of weaving traffic is generally similar to that in a basic freeway section and an on- or of- ramp section. Traffic density and speed appear to be better parameters than traffic volume for explaining the behavior of weaving traffic. For the same purpose, using the traffic conditions of the origin and the destination lanes are found to be more effective than using the average traffic conditions of the freeway. A detailed analysis of the gap acceptance characteristics of late merging vehicles shows that there is no significant difference between the size of gaps accepted by late merging vehicles and that accepted by early merging vehicles.

• 한국지반공학회논문집
• /
• 제34권11호
• /
• pp.5-19
• /
• 2018

지반앵커의 정착장에 작용하는 정착응력 분포 특성은 매우 비선형적이며 공학적인 메카니즘이 비교적 복잡하기 때문에 다양한 지반조건 및 비선형적 주면전단거동을 구체적으로 모사하여 지반앵커를 설계하는데 어려움이 크다. 이런 한계로 인하여 현재 대부분의 관련 설계 기준서에는 편의상 정착장 전장에 걸쳐 일정한 주면전단응력분포를 가정하여 설계에 적용하고 있다. 따라서 본 연구에서는 인장형 앵커의 인발거동 특성을 분석하기 위하여 풍화토 지반조건을 대상으로 현장인발시험을 수행하였으며 이를 토대로 앵커 정착장의 주면전단거동을 정립하고, 정착장 거동특성을 비교적 간편하게 예측하기 위한 다중선형모델 및 이를 적용한 해석적 기법을 제안하였다. 현장시험결과와 해석적 결과가 상호 유사하게 나타남에 따라 본 연구에서 제시된 다중선형모델 및 이를 이용한 해석적 기법의 적용성 및 유효성을 확인할 수 있었다. 정착장 주면전단거동의 경우 최대인발하중 보다 작은 하중조건에서는 정착장 시작점에서 최대전단응력이 분포하게 되나 최대인발하중이 발생한 이후부터는 정착장 시작점에서 전단응력이 가장 작게 분포하고, 정착장 시작점으로부터 일정거리 이격된 지점에서 최대전단응력이 발생함을 확인하였다.

• Steel and Composite Structures
• /
• 제28권3호
• /
• pp.309-318
• /
• 2018

Buckling Restrained Braced (BRB) frames have been widely used as an efficient seismic load resisting system in recent years mostly due to their symmetric and stable hysteretic behavior and significant energy dissipation capacity. In this study, to provide a better understanding of the behavior of BRB frames with various beam-column connections, a numerical study using non-linear finite element (FE) analysis is conducted. All models are implemented in the Abaqus software package following an explicit formulation. Initially, the results of the FE model are verified with experimental data. Then, diverse beam-column connections are modeled for the sake of comparison from the shear capacity, energy dissipation and frame hysteresis behavior points of view until appropriate performance is assessed. The considered connections are divided into three different categories: (1) simple beam-column connections including connection by web angle and connection by seat angle; (2) semi-rigid connection including connection by web and seat angles; and (3) rigid beam-column connections by upper-lower beam plates and beam connections with web and flange splices. Results of the non-linear FE analyses show that these types of beam-column connections have little effect on the maximum story drift and shear capacity of BRB frames. However, the connection type has a significant effect on the amount of energy dissipation and hysteresis behavior of BRB frames. Also, changes in length and thickness of the angles in simple and semi-rigid connections and changes in length and thickness of plates in rigid connections have slight effects (less than 4%) on the overall frame behavior.

• Biomolecules & Therapeutics
• /
• 제4권2호
• /
• pp.167-173
• /
• 1996

This study was undertaken to evaluate a behavior-electroencephalogram (EEG) pattern relationship in pilocarpine- and kainic acid-induced convulsions of rats. Also we intended to examine the effect of a noncompetitive N-methyl-D-aspartate (NMDA) receptor antagonist, MK-801, and diazepam on the pilocarpine-induced behavioral and electrical seizures in rats. The electrical activities at frontal and hippocampal areas and behavior activities were measured in freely moving rats. At the beginning of the experiments, the rats displayed an exploratory behavior. This awake and moving phase with a low amplitude, irregular, 4-10 Hz wave was followed by a still phase. Pilocarpine (400 mg/kg, i.p.) and kainic acid (0.5 mg/kg, i.c.v.) induced tonic and clonic seizures. The pilocarpine-induced change in electrical activities exhibited a weak correlation with behavioral convulsion at all stages. The amplitude and duration of the electrical response were not linear with the degree of behavioral score. An application of MK-801 (dizocilpine, 7.5 mg/kg) did not affect the amplitudes of the convulsant-induced electrical activities, though the same dose of this drug caused the deformation of the electrical pattern. There was no effect of MK-801 on the behavioral and electrical activities as expected. Diazepam (1 mg/kg) did not affect the amplitude of the electrical activities induced by pilocarpine but changed the pattern of these activities. Our study shows that there is no linear relationship between degree of behavior and amplitude of electrical activities of convulsants. This may indicate that the NMDA receptor stimulation can be processed by the neocortical or hippocampal network in a different way between behavioral and electrical activities.

• 한국간호교육학회지
• /
• 제27권3호
• /
• pp.287-297
• /
• 2021

Purpose: The purpose of this study was to examine the differences in preventive health behaviors of school-age children according to their mothers' health beliefs and attitudes toward the prevention of infectious diseases. Methods: This study was conducted with 121 pairs of 4th to 6th grade elementary school children and their mothers from October 13 to October 30, 2020. The collected data were analyzed using descriptive analysis, an independent t-test, a one-way ANOVA, Sheffé's test, Pearson's correlation coefficient analysis and a multiple linear regression. Result: The mean and SD of mother's health belief in preventing infectious diseases was 3.58±0.41, the mean and SD of mother's attitude toward preventing infectious diseases was 3.39±0.38, and the mean and SD of late school-age children's preventive health behavior was 3.52±0.37. The multiple linear regression results show that the children's vaccination behavior was influenced by their mothers' perceived benefits in preventing infectious diseases. In addition, the child's vitamin C and vegetable consumption was influenced by the mother's perceived susceptibility in preventing infectious diseases, and the child's mask-wearing behavior was influenced by the mother's perceived seriousness in preventing infectious diseases. Conclusion: In order to improve the health behavior of school-aged children, programs or education are required to enhance the health beliefs and attitudes of their mothers, who were shown to affect the preventive health behavior of their children.

• 대한인간공학회지
• /
• 제31권5호
• /
• pp.647-655
• /
• 2012

Objective: The purpose of this study was to confirm difference between angular foot movement time and existing foot Fitts' law predicting times, and to develop the angular foot Fitts' law in the foot tapping task. Background: Existing studies of foot Fitts' law focused on horizontal movement to predict the movement time. However, when driving a car, humans move their foot from the accelerator to the brake with a fixed heel. Therefore, we examined the experiment to measure angular foot movement time in reciprocal foot tapping task and compared to conventional foot Fitts' law predicting time. And, we developed the angular foot Fitts' law. Method: In this study, we compared the angular foot movement time in foot tapping task and the predicted time of four conventional linear foot Fitts' law models - Drury's foot Fitts' law, Drury's ballistic, Hoffmann's ballistic, Hoffmann's visually-controlled. 11 subjects participated in this experiment to get a movement time and three target degrees of 20, 40, and 60 were used. And, conventional models were calculated for the prediction time. To analyze the movement time, linear and arc distance between targets were used for variables of model. Finally, the angular foot Fitts' law was developed from experimental data. Results: The average movement times for each experiment were 412.2ms, 474.9ms, and 526.6ms for the 89mm, 172mm, and 253mm linear distance conditions. The results also showed significant differences in performance time between different angle level. However, all of conventional linear foot Fitts' laws ranged 135.6ms to 401.2ms. On the other hand, the angular foot Fitts' law predicted the angular movement time well. Conclusion: Conventional linear foot Fitts' laws were underestimated and have a limitation to predict the foot movement time in the real task related angular foot movement. Application: This study is useful when considering the human behavior of angular foot movement such as driving or foot input device.